Guard Hardware

To see prices, Login or register your country here.
  Product List Price Qty
info

Cartridge Holder, 7.8 x 10 mm

Part Number: 186000708
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
Cartridge Holder, 7.8 x 10 mm
Part Number: 186000708
----
info

Chemistry Socks

Part Number: 600001730
Show the world your love of chemistry with these fun periodic table of elements socks. Great for work or a special event this summer!
Chemistry Socks
Part Number: 600001730
----
info

Cartridge Holder, 19 x10 mm

Part Number: 186000709
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
Cartridge Holder, 19 x10 mm
Part Number: 186000709
----
info

O-rings for 10 x10 mm cartridge holder, 2 pkg

Part Number: 700001436
This spare part is a Waters Quality part
O-rings for 10 x10 mm cartridge holder, 2 pkg
Part Number: 700001436
----
info

O-RING PKG 2/PK

Part Number: WAT097954
O-RING PKG 2/PK
Part Number: WAT097954
----
info

Cartridge Column Holder for 2.1 x 20 mm Cartridge Column

Part Number: 186000262
Cartridge Column Holder for 2.1 x 20 mm Cartridge Column
Part Number: 186000262
----
info

PrepPak® 1000 Module

Part Number: WAT089592
This spare part is a Waters Quality part
PrepPak® 1000 Module
Part Number: WAT089592
----
info

O-rings for 19 x 10mm Cartridge Holder, 2 pkg

Part Number: 700001020
This spare part is a Waters Quality part
O-rings for 19 x 10mm Cartridge Holder, 2 pkg
Part Number: 700001020
----
info

O-Ring, Filling port, 10/Pkg

Part Number: WAT005129
This spare part is a Waters Quality part
O-Ring, Filling port, 10/Pkg
Part Number: WAT005129
----
info

Kalrez Washer, 10/pk

Part Number: WAT005147
This spare part is a Waters Quality part
Kalrez Washer, 10/pk
Part Number: WAT005147
----
info

Holder kit for Cartridge and Guard Columns

Part Number: WAT046910
The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical col...
Holder kit for Cartridge and Guard Columns
Part Number: WAT046910
----
info

O-Ring Buna-N 2-030, (RF Feed Thru)

Part Number: WAT022453
This spare part is a Waters Quality part
O-Ring Buna-N 2-030, (RF Feed Thru)
Part Number: WAT022453
----
info

Check Valve, RCM

Part Number: WAT082888
This spare part is a Waters Quality part
Check Valve, RCM
Part Number: WAT082888
----
info

O-Ring, RCM, 4/pkg

Part Number: WAT015797
This small O-Ring is used for the connectors on the RCM 8 X 10 Cartridge Holder when using normal phase chemistry.
O-Ring, RCM, 4/pkg
Part Number: WAT015797
----
info

2.1x10mm Holder Kit for Cartridges and Guard Columns

Part Number: WAT097958
The Sentry guard column holder is required for use with Sentry guard columns that have a 2.1 mm I.D. and a length of 10 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry gu...
2.1x10mm Holder Kit for Cartridges and Guard Columns
Part Number: WAT097958
----
info

O-ring, 19mm ID Prep Guard Holder, 2/Pk

Part Number: 186008824
Replacement O-rings for the 19x10mm Prep Guard Holder (Part Number 186008745). These o-rings are considered both SFC and LC mobile phase compatible.
O-ring, 19mm ID Prep Guard Holder, 2/Pk
Part Number: 186008824
----
info

2.1 mm Cartridge End Connector Kit

Part Number: 700000117
2.1 mm Cartridge End Connector Kit
Part Number: 700000117
----
info

ConnectorTube Assy. non-metallic

Part Number: WAT088919
This spare part is a Waters Quality part
ConnectorTube Assy. non-metallic
Part Number: WAT088919
----
info

Connector Assy, SS

Part Number: WAT082892
This spare part is a Waters Quality part
Connector Assy, SS
Part Number: WAT082892
----
info

Integrated Guard Holder

Part Number: WAT046905
Integrated Guard Holder
Part Number: WAT046905
----
info

Cartridge Holder PKG 10 x10 mm

Part Number: 289000779
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
Cartridge Holder PKG 10 x10 mm
Part Number: 289000779
----
info

O-Ring Kit, 2/pkg

Part Number: 186007012
O-Ring Kit, 2/pkg
Part Number: 186007012
----
info

PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg

Part Number: WAT005137
Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the...
PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Part Number: WAT005137
----
info

O-rings for 7.8 x 10mm cartridge holder, 2 pkg

Part Number: 700001019
This spare part is a Waters Quality part
O-rings for 7.8 x 10mm cartridge holder, 2 pkg
Part Number: 700001019
----
info

GUARD-PAK HOLDER

Part Number: WAT088141
GUARD-PAK HOLDER
Part Number: WAT088141
----
`

Contact Waters

Local Offices

Waters Online ToolBox

Product Selection made easy
View Now

Academic Preferred Pricing on Consumables Working in Academia?

Then you'll receive Waters Preferred Pricing... a 20% discount on your consumable products order! From LC columns to sample prep, vials, filters, standards & reagents, and workflow analytical kits like GlycoWorks & ProteinWorks. Discount will be applied to cart at checkout.
Find products now!