Chemistry |
Cyano (CN) |
Separation Mode |
Reversed Phase |
Particle Substrate |
Silica |
pH Range Min |
2 pH |
pH Range Max |
8 pH |
Maximum Pressure |
18000 psi (1240 Bar) |
Endcapped |
No |
Silanol Activity |
High |
Particle Shape |
Spherical |
Particle Size |
1.8 µm |
Endfitting Type |
Direct-Connect |
Pore Size |
100 Å |
Format |
VanGuard Pre-column |
Surface Area |
230 |
System |
UHPLC, UPLC |
Particle Technology |
HSS |
USP Classification |
L10 |
Inner Diameter |
2.1 mm |
Length |
5 mm |
Carbon Load |
5 % |
UNSPSC |
41115700 |
Brand |
ACQUITY UPLC |
Product Type |
Guards |
Units per Package |
3 pk |
ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column, 100Å, 1.8 µm, 2.1 mm X 5 mm, 3/pk
Your ACQUITY UPLC HSS CN column uses chemistry that is an ultra-performance, general-purpose, propyl cyano bonded phase that provides superior peak shape for bases, increased retention, and extremely long column lifetimes at low pH. ACQUITY HSS CN columns are fully scalable and transferable to HPLC separations, making them some of the most valuable pieces of lab equipment. To ensure they last a long time, protect the columns using the ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column.
The ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column is a single unit that is designed to be used with the ACQUITY UPLC columns for reversed-phase Liquid Chromatography and can be attached directly to the inlet side of an ACQUITY UPLC Column. The lab equipment is fairly easy to install and works to ensure that your ACQUITY UPLC Column is protected from damaging contaminants. It enhances and improves the column’s analytical performance by filtering out any chemical and particulate impurities that may be present in the mobile phase stream.
Depend on the Waters ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column to ensure that your UPLC analytical columns last longer without compromising their chromatographic analytical performance. This is achieved by removing chemical and particulate contaminants from the columns and maintaining their UPLC, UHPLC, and HPLC separation efficiency.
The strictest cGMP, ISO 9001 conditions are used in the manufacturing of the ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column. Each unit is tested and certified for its use, guaranteeing that it will deliver optimal performance and enhance the selectivity, sensitivity, and speed of your analysis. Additionally, as the ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column are built with the same premier materials as the ACQUITY UPLC columns, they are ideally suited for analytical performance.
The ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column is well suited to protect a wide range of ACQUITY HSS Cyano columns. You can find one that suits you by browsing through our online catalog. You can also shop for lab equipment directly from us through our website.
Also, purchase the TruView LCMS Certified Clear Glass 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk to be able to store your analytes safely.
What Is The pH Range For The ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column?
The ACQUITY UPLC HSS Cyano (CN) VanGuard Pre-column listed here works well across the 2-8 pH range.