This course covers the basic maintenance and troubleshooting on the ACQUITY Classic UPLC, H-Class and I-Class. Participants will learn how to carry out routine maintenance and practice troubleshooting techniques in the lab.
This course covers the ACQUITY UPLC (Classic, H-Class and I-Class)
An Electronic course manual is included in the price of course. Hard Copy course manuals are available for an additional charge. See course notes for details.
Topics Covered
- Replacing the sample needle and needle seal
- Calibrating the needle
- Characterizing the needle, needle seal and loops
- Replacing the sample syringes
- Performing the sample manager diagnostic tests
- Detector maintenance
- Troubleshooting techniques and lab
Who Should Attend
Users responsible for the operation and maintenance of the ACQUITY UPLC System.
Prerequisites
You should have a minimum of six weeks experience in operating the ACQUITY UPLC System.
Course Notes
Each attendee will receive an electronic course manual for future reference and a Certificate of Training.
If you would like to receive a hard copy of the course manual, enter “HCM” under comments on your registration form. There will be an additional fee of $150.00.
Contact Information
Call 1-800-252-4752, ext 8704. For MS Technology call 1-800-252-4752, ext.
4605.
Or, send us an email.
Cancellation Policy
Cancellation Policy - Milford, MA
Cancellation is required 10 business days prior
to the start of a course to avoid 100% billing. If cancellation occurs with less
than 10 days notice, a credit will be held for one year. Waters Corporation reserves
the right to cancel any course when minimum enrollment is not met. If you have
registered for a course that has been cancelled by Waters Corporation you will
receive a full refund. Waters Corporation cannot be held responsible for the
purchase of non-refundable tickets or other costs incurred due to such a cancellation.
Cancellation Policy - Beverly, MA and Pleasanton, CA
All dates are subject to change without notice,
please call to confirm course dates. Registration is on a first-come, first serve
basis. Courses will have a minimum of 3 and a maximum of 6 enrolled. Attendees
should have a minimum of 6 weeks experience operating the instrument. Cancellation
of your reservation less than 4 weeks prior to course start date results in a
50% tuition charge. Courses with less than 3 participants enrolled 4 weeks prior
to start date will be cancelled. Instrument hardware and software used for training
purposes may be a different configuration or version than yours. For specific
information please feel free to contact us. *While every effort will be made
to accommodate customer training requirements, attendees should note that training
may be performed on a different version of hardware/software than that which
is being used in their lab. For specific information relating to the hardware/software
to be used during training, do not hesitate to contact us.
Cancellation Policy – Pre-recorded eLearning
Registrations may be cancelled for any reason with a full refund if done so within 72 hours of purchase as long as no more than 25% of the course has been completed. If cancellation occurs after 72 hours, a refund will not be issued but Waters will grant access to another online course of equal or lesser value.
Hours
All Milford, MA and Regional courses begin at 8:30 am and end at 4:30 pm.
All Beverly, MA courses begin at 9:00 am and end at 5:00 pm.
