Soft Drink Analysis Mobile Phase Potassium Phospahte and ethanol for use with NovaPak Column. Please note there are 4 units per package.
Separation Mode |
Reversed Phase |
Detection Method |
UV |
Formulation |
Liquid |
Storage Condition |
Room Temperature |
System Type |
LC |
Shipping Condition |
Ambient |
Volume |
1 Liter |
Type |
Mobile Phase |
UNSPSC |
41116104 |
Application |
Food |
Product Type |
Standards |
Units per Package |
4 pk |
Soft Drink Mobile Phase for NovaPak Column Analysis, 4/pk
Specifically designed to be used by non-chemists, the Soft Drink Mobile Phase from Waters is easy to use for onsite bottle quality control workers who need to perform quick and accurate analysis of commonly used additives in drink formulations. As a part of the Waters Beverage Analysis Kit, the Mobile Phase can be used with NovaPak Columns and a rapid LC method to ensure final product quality and improve manufacturing efficiency. The pre-formulated mobile phase allows for less time to be spent on analyst preparation while minimizing lab-to-lab and analyst-to-analyst variability.
The Soft Drink Mobile Phase for NovaPak Columns is designed to address the specialized needs of beverage manufacturers, offering a simple and easy-to-use solution that increases laboratory productivity while improving data quality, minimizing costs, and enhancing overall product consistency. This allows your facility to ensure only high-quality and consistent beverages are delivered to the market, creating positive customer experiences and brand value. With seamless integration into quality control systems and lab equipment, this solution will become critical to your laboratory.
The Soft Drink Mobile Phase for NovaPak Columns works in conjunction with the Beverage Analysis Kit to enable rapid analysis of six additives in soft drinks (acesulfame-K, saccharin, caffeine, benzoate, sorbate, and aspartame) with minimal sample preparation and high sample throughput. The optimized, easy-to-follow methodology results in a rugged and repeatable process that works with a variety of LC systems to achieve results in as little as 7 minutes (UPLC) or 10 minutes (HPLC).
Each order includes 4 units of Soft Drink Mobile Phase in 1-liter units.
How And When Should I Replace My Soft Drink Mobile Phase?
One liter of mobile phase should be used for one week before circulation. To replace it, you should purge the old mobile phase from the system and replace it with a fresh mobile phase. To prime and start the pump, set the pump flow rate to 0.0 mL/min and remove waste from the solvent reservoir. Place the solvent line into the new bottle of mobile phase before setting the pump flow to 1.0 mL/min, then wait 15 minutes. Monitor the detector for stability. When stable, return the waste line to the solvent reservoir to recirculate, continuing to monitor. Once stable, inject a standard to recalibrate the instrument.