UNSPSC |
41115712 |
Brand |
Oasis |
Product Type |
Solid Phase Extraction |
Units per Package |
500 pk |
Chemistry |
HLB |
Endcapped |
No |
Format |
Vac Cartridge |
Mass Spec Compatibility |
Yes |
Mode |
Reversed Phase |
Particle Size |
30 µm |
Pore Size |
80 Å |
Sorbent Substrate |
Copolymer |
Sorbent Weight |
60 mg |
Water Wettable |
Yes |
pH Range Min |
0 pH |
pH Range Max |
14 pH |
Material |
Polypropylene |
Barrel Size |
3 cc |
Oasis HLB 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 30 µm, 500/pk
Using a mixed-mode oasis sorbent, which has reversed-phase and ion-exchange capabilities for orthogonal sample preparation, the Oasis HLB is a multipurpose, reverse-phase sorbent that can boost sensitivity and give analyte specificity. A water-wettable copolymer that is stable over the entire pH range of 0 to 14 was used to create the Oasis HLB. The Oasis HLB has become the industry standard in SPE for scientists all over the world due to its great pH stability.
The Oasis HLB sorbent, a universal polymeric reversed-phase sorbent that was created for the extraction of a broad range of acidic, basic, and neutral chemicals from diverse matrices using a straightforward, generic methodology, is contained in the 3 cc Oasis HLB cartridges. There is no need to take special measures to prevent the sorbent beds from drying out during the crucial steps prior to sample loading because the Oasis HLB sorbent is water wettable, maintaining its ability for higher retention and superior recoveries even if the sorbent runs dry.
Equilibration and condition steps are necessary for regular solid-phase extraction procedures to guarantee that sorbents are ready for sample input. The sorbent must be wetted during the condition step in order for the liquid to enter the pores and be retained there. To get the sorbent ready for aqueous sample loading, it needs to be wetted and then equilibrated with the aqueous solution. Analytes can interact with the Oasis HLB since it is a water-wettable sorbent, and they are retained when added directly into an aqueous sample solution. Due to the Oasis HLB's ability to do away with the requirement for equilibration and condition phases, you may complete your analysis more quickly and with fewer resources overall.
The Oasis HLB sorbent is water-wettable, so even if it dries out, it will retain its potential to provide better recoveries and higher retention, saving you even more time because you won't need to take any further measures to prevent the sorbent beds from drying out. To ensure that you receive genuine Waters lab equipment and the lowest price on the market, we strongly advise you to shop for lab equipment directly from our website. You may also want to review TruView LCMS Certified Clear Glass 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk; the manufacturing and handling techniques used to create TruView LCMS Certified vials are strictly regulated.
Why Can Only Cations Be Found in Mass Spectrometry?
Only ions will be identified when using mass spectrometry to determine the mass of charged particles; neutral molecules won't be.