Oasis HLB 1 cc Vac Cartridge, 30 mg Sorbent per Cartridge, 30 µm, 1000/pk
The water-wettable Oasis HLB 1 cc Vac Cartridge provides high retention capacity for a wide polarity spectrum of analytes, even if the sorbent bed runs dry during conditioning or sample loading. This means you can rely on the Oasis HLB 1 cc Vac Cartridge to make your SPE procedures more durable and resilient, reducing the requirement for sample preparation repeats. Made using a specific ratio of two monomers, the hydrophilic N-vinylpyrrolidone and lipophilic divinylbenzene, the lab equipment is a Hydrophilic-Lipophilic-Balanced, water-wettable reversed-phase universal sorbent for acidic, neutral and basic compounds.
The one-of-a-kind substrate in the Oasis HLB 1 cc Vac Cartridge has some significant characteristics, including pH stability and solvent compatibility, exceptional polar molecule retention, and a relative hydrophobic retention capacity three times higher than typical silica-based SPE sorbents. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
To collect bigger samples for analysis, use the Oasis HLB 1 cc Vac Cartridge. The Oasis HLB sorbent, a universal polymeric reversed-phase sorbent developed for the extraction of a wide range of acidic, basic, and neutral chemicals from diverse matrices using a simple, generic technique, is present in the lab equipment. The Oasis HLB sorbent is also water wettable, so even if the sorbent runs dry, it retains its capacity to provide increased retention and excellent recoveries. This means that you will not have to go to great lengths to protect the sorbent beds from drying up during the important procedures leading up to the sample loading.
Due to the greater retention capacity of the Oasis HLB 1 cc Vac Cartridge, more analytes are retained with less breakthrough, improving the recovery and overall repeatability of your SPE process. The Oasis HLB 1 cc Vac Cartridge is also available in different configurations to help you process analytes with different particle sizes. Search for the relevant products using our online store, which also enables you to shop for lab equipment.
Explore the XBridge BEH C18 Method Validation Kit, 130Å, 2.5 µm, 2.1 mm X 100 mm, 3/pk as well. The lab equipment contains three batches of XBridge BEH C18 columns packed with three different batches of sorbent.
