Oasis WAX Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm, 50/pk
The Oasis WAX Plus Short Cartridge uses the Oasis WAX sorbent, a polymeric weak anion-exchange, reversed-phase, mixed-mode sorbent that has been specially designed for quick, easy, and highly selective sample preparation of strong acidic chemicals. This mixed-mode sorbent has a wide pH working range of 0 to 14, is polymeric in nature, and is water-wettable. To ensure that no contamination affects your analysis or sample preparation, the lab equipment is extremely clean.
Due to the usage of the Oasis WAX sorbent, the Oasis WAX Plus Short Cartridge is water wettable and keeps up its ability to provide better recovery and higher retention even when the sorbent runs out. This implies that special measures are not required to prevent the sorbent beds from drying out during the crucial procedures prior to sample loading.
All the benefits of the Oasis HLB sorbent are included in the Oasis WAX sorbent, which offers robust and highly selective SPE procedures to identify, confirm, and quantify extremely acidic chemicals in biological fluids. The unique, carefully monitored Waters production method also results in Oasis WCX with 0.6 meq/g of piperazine-ion-exchange capability.
When working with viscous samples, the 60 µm particle size of this Oasis WAX Plus Short Cartridge is advised. You can purchase the Oasis WAX Plus Short Cartridge directly from us or through the Waters online store, but it is also available in a wider range of particle sizes to meet your needs. You may easily browse for all the necessary lab equipment at the store by using the assistance of additional products that compliment your equipment and shop for lab equipment as needed.
You might also be interested in Waters BPA Method Kit; Waters' ACQUITY UPLC solution complies fully with ASTM Method D7574-09 for the analysis of bisphenol A in drinking water. This package includes the Oasis HLB 5cc (200mg) LP Glass Cartridges, the LCMS Certified Vials, the ACQUITY BEH C18, 1.7um, 2.1 x 50mm Column, and the ACQUITY Isolator Column. It is designed for use with the ACQUITY system. These goods, which are a part of ASTM Method D7574-09, have been chosen to assure the best performance possible.
