Oasis MCX 1 cc Vac Cartridge, 30 mg Sorbent per Cartridge, 30 µm, 500/pk
Use the 1 cc OASIS MCX Vac Cartridge to build methods quickly and simply while utilizing the twin modes of retention (ion exchange and reversed-phase) on a single, stable, high-surface-area organic co-polymer that is stable across the widest operating pH range.
The OASIS MCX is a powerful mixed-mode cation exchange, water-wettable, polymeric sorbent made using a Waters-patented technique. Without the need for any attempts to prevent the sorbent beds from drying out during the crucial steps prior to sample loading, it enables better retention and exceptional recoveries even if the sorbent runs dry. All our lab equipment is manufactured to the highest standards using strict quality control measures.
The OASIS MCX is a unique, mixed-mode polymeric sorbent that has been designed to produce improved selectivity and sensitivity for extracting basic chemicals containing cation-exchange groups. It was developed to overcome the limitations of the conventional silica-based mixed-mode SPE lab equipment. View our complete line of products, which includes the 1 cc OASIS MCX Vac Cartridge, and browse our selection of lab supplies for all of your method development requirements.
Utilize the Oasis MCX 1 cc Vac Cartridge to manipulate pH during the development, optimization, and use of SPE methods on mixed-mode sorbents to carry out demanding and robust procedures without analyte breakthrough or loss of recovery due to dissolving silica particles at high pH or cleaning bonded phase at low pH.
The Sample Extractions Products (SPEs) most frequently employed in bioanalytical laboratories are those from the Waters OASIS product line. Oasis products are essential lab equipment because they are made to provide the best SPE recovery, cleanest extracts, lowest matrix effects, and lowest technique variability.
You may also want to explore the XBridge BEH C18 Method Validation Kit, 130Å, 2.5 µm, 2.1 mm X 100 mm, 3/pk. Three batches of XBridge BEH C18 columns filled with three different batches of sorbent make up this method validation kit.
