Oasis MCX 1 cc Vac Cartridge, 30 mg Sorbent per Cartridge, 60 µm, 100/pk
The Oasis MCX, which is a new, mixed-mode polymeric sorbent that has been tuned to produce improved selectivity and sensitivity for extracting basic chemicals with cation-exchange groups, is contained in the Oasis MCX 1 cc Vac Cartridge. Because the Oasis MCX sorbent is water wettable, it retains its potential to provide higher retention and excellent recoveries even if the sorbent runs dry, eliminating the need for extra precautions to prevent the sorbent beds from drying out during the key processes leading up to sample loading. When working with viscous substances, a particle size of 60 µm is recommended. These syringe-barrel cartridges are made for vacuum manifolds and automated SPE devices.
Use the Oasis MCX 1 cc Vac Cartridge to design rapid, simple methods while harnessing the strength of dual retention modes (ion exchange and reversed-phase) on a single, clean, stable, high-surface-area organic co-polymer that is stable across the widest operating pH range.
The OASIS MCX is a robust mixed-mode cation exchange, water wettable, polymeric sorbent made utilizing a Waters-patented technique. Even if the sorbent runs dry, it allows the lab equipment to provide higher retention and recovery, removing the need for any attempts to keep the sorbent beds from drying out during the key steps prior to sample loading.
The Waters OASIS line of Sample Extractions Products (SPEs) is the most extensively utilized in bioanalytical laboratories. The Oasis products are designed to provide the maximum SPE recovery, the cleanest extracts, the smallest matrix effects, and the smallest technique variability, making them essential lab equipment.
Due to the ability to manipulate pH during the development, optimization, and use of SPE methods on mixed-mode sorbents with the Oasis MCX 1 cc Vac Cartridge, you can perform tough and robust procedures without analyte breakthrough or loss of recovery due to dissolving silica particles at high pH or cleaning bonded phase at low pH.
Waters recommends that you also invest in the XBridge BEH C18 Method Validation Kit, 130Å, 2.5 µm, 2.1 mm X 100 mm, 3/pk that offers multiple columns in one kit.
