XBridge BEH HILIC Column, 130Å, 3.5 µm, 2.1 mm X 30 mm, 1/pk
Unbonded BEH substrate is present in XBridge BEH HILIC columns, which are intended to hold and separate extremely polar molecules. These particular columns are evaluated and tuned to deliver effective, repeatable separations in HPLC HILIC circumstances. The chemical stability of the BEH particle leads to longer column lifetimes than silica-abased HILIC phases.
When compared to silica-based HILIC columns, the XBridge BEH HILIC XP Column delivers improved peak form, retention, and column longevity in addition to an alternate selectivity to conventional reversed-phase columns. The XBridge BEH HILIC XP Column, which is based on durable and reliable BEH Technology, has become the new benchmark for HILIC separations. The XBridge BEH HILIC XP Column is essential lab equipment thanks to its operational pH range of 1 to 9 and astounding pressure-sustaining restrictions.
The unbonded BEH substrate was used to develop the XBridge BEH HILIC XP Column, which is intended to hold and segregate extremely polar molecules. These columns are special and have been tested and tuned to deliver effective, repeatable separations in HPLC HILIC circumstances. You will have long column lives thanks to the chemical stability of the BEH particle upon which this column is built. A seamless transition path to UPLC adoption is made possible by the inclusion of 2.5 m eXtended Performance [XP] columns in ultra-low dispersion hardware, which provides superior separation performance, resilience, and throughput for HPLC tests.
You can browse our website and consult our catalog to find out more about the different product variations, such as the XBridge BEH HILIC XP Column listed here, to find different products that work with them or even shop for lab equipment so you can restock your inventory and increase your existing equipment portfolio.
Along with the XBridge BEH HILIC XP Column, you might also want to review the XBridge BEH HILIC XP VanGuard Cartridge, 130Å, 2.5 µm, 2.1 mm X 5 mm, 3/pk, which has been optimized to protect all 2.1 mm and 3.0 mm I.D. XBridge BEH HILIC analytical columns containing 2.5 µm sorbent particles and is primarily used to extend analytical column lifetime and performance by removing particulate contamination from the mobile phase stream.
