This is an Application Brief and does not contain a detailed Experimental section.
This application brief demonstrates analysis of pharmaceutical compounds in plasma.
The compounds used in this study are –
Column: |
Xterra MS C18, 2.1 x 20 mm IS, 3.5 μm, (p/n: 186001923) |
Mobile phase A: |
10 mM NH4HCO3, pH 10 |
Mobile phase B: |
Methanol |
Flow rate: |
0.4 mL/min |
Injection volume: |
20 μL |
Sample concentration: |
5 μg/mL |
Temperature: |
Ambient |
Detection: |
MS |
Instrument: |
Waters 277 Sample Manager, Waters 1525 Binary HPLC Pump and Waters Micromass Quattro Ultima |
Quattro Ultima |
|
---|---|
ES+ MRM cone (V): |
5.0 |
Capillary: |
3.5 |
Source temp. (°C): |
150 |
Desolvation temp. (°C): |
400 |
Cone gas flow (L/Hr): |
50 |
Desolvation gas fLow(L/Hr): |
550 |
LM resolution 1 & 2: |
13.5 |
HM resolution 1 & 2: |
13.5 |
Ion energy 1: |
0.4 |
Ion energy 2: |
0.8 |
Multiplier (V): |
650 |
SPE: |
Oasis HLB μElution Plate, (p/n:186001828BA) p/n:186001828BA |
Condition: |
200 μL Methanol |
Equilibrate: |
200 μL Water |
Load: |
150 μL Spiked rat plasma with 2% H3PO4, diluted with 1:1 Water |
Wash: |
200 μL 5% Methanol in Water |
Elute: |
50 μL Methanol |
Dilute: |
100 μL Water |
Compounds (MRM Transitions, Cone voltage (V), CID (eV)
The top figure is the total ion current, followed by the extracted ion signals for each of the three analytes.
WA31787.19, June 2003