3-Column Select Valve Rebuild Kit
Part Number: 700000431
Rebuilding the 2790/2795 Three-Column Select Valve involves changing the rotor seal and stator face assembly.
3-Column Select Valve Rebuild Kit
----
Buy Now
Rheodyne Valve Rebuild Kit
Part Number: 417000107
Rebuild kit for the fluidics valve
Rheodyne Valve Rebuild Kit
----
Buy Now
6-Column Select Valve Rebuild Kit
Part Number: 700000434
Rebuilding the 2790/2795 Six Column Select Valve involves changing the rotor seal and stator face assembly.
6-Column Select Valve Rebuild Kit
----
Buy Now
ESI Probe Spares Kit
Part Number: 700004292
This spare part is a Waters Quality part
ESI Probe Spares Kit
----
Buy Now
TUBE FEP 6x4 25M
Part Number: 6060754-S25
This spare part is a Waters Quality part
TUBE FEP 6x4 25M
----
Buy Now
Prime/Vent Valve Rebuild Kit (Rheodyne)
Part Number: WAT270936
This spare part is a Waters Quality part
Prime/Vent Valve Rebuild Kit (Rheodyne)
----
Buy Now
Rheodyne Inj. Valve Rebuild Kit,
Part Number: 700001331
The Rheodyne RV703-105 Prep Inject Valve Rebuild Kit involves changing the rotor seal and stator face assembly.
Rheodyne Inj. Valve Rebuild Kit,
----
Buy Now
ACQUITY UPLC Col. In-Line Filter Kit
Part Number: 205000343
Waters recommends you filter buffers and samples using a 0.2µm filter prior to analysis. Filtration protects the column and instrument components from a build-up of particulate matter, improving column lifetime and minimizing system downtime. The ACQUITY ...
ACQUITY UPLC Col. In-Line Filter Kit
----
Buy Now
BGM Plunger Seal Kit, 4/pkg
Part Number: 700001494
The BGM Plunger Seal kit contains four each of the following: high pressure flanged seal, low-pressure seal, and a floating flanged seal-wash seal. The high- and low-pressure seals prevent pressurized solvent from leaking past the sapphire plunger.
BGM Plunger Seal Kit, 4/pkg
----
Buy Now
Tubing Capillary, 75µm Column Outlet
Part Number: 430001848
The part number 430001848, Tubing Capillary, 75µm Column Outlet is part of the Mixer Kit for 1mm Columns (part number 205000540).
Tubing Capillary, 75µm Column Outlet
----
Buy Now
XEVO TQD / SQD 2 (ROTARY PUMP) PERFORMANCE MAINTENANCE KITt WITH CHEMICAL KIT
Part Number: 176002780
The Waters® Performance Maintenance Kit with Chemistry for the SQD 2 (Rotary) Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your SQD 2 (Rotary) Mass Spectrometer operating at peak performance on an annual basis. The Waters® Pe...
XEVO TQD / SQD 2 (ROTARY PUMP) PERFORMANCE MAINTENANCE KITt WITH CHEMICAL KIT
----
Buy Now
3mm Flow Cell Rebuild Kit
Part Number: WAS081347
The 3mm Flow Cell Rebuild Kit contains (1) entrance lens screw, (1) entrance lens holder, (1) entrance lens (curved), (10) gaskets, (1) exit window (flat), (1) exit window holder, (1) exit window screw, (1) cuvette lens screw, (1) cuvette lens, and (1) sp...
3mm Flow Cell Rebuild Kit
----
Buy Now
10 mm Flow Cell Rebuild Kit
Part Number: WAS081346
The 10mm Flow Cell Rebuild Kit contains the following parts: two lens screws, one entrance lens washer, one entrance lens (curved), ten gaskets, one exit window (flat), one exit lens washer, one cuvette lens screw, one cuvette lens, and one cuvette lens h...
10 mm Flow Cell Rebuild Kit
----
Buy Now
Finger Tight Plug
Part Number: 700009101
This spare part is a genuine Waters Quality Part
Finger Tight Plug
----
Buy Now
Column Retainer Rod, 2/pkg
Part Number: 700003156
ACQUITY Column Retainer Rod Kit, (2PK) for a Column Manager
Column Retainer Rod, 2/pkg
----
Buy Now
PIN SPIRAL 3.0DIA X 16.ST.STL
Part Number: 5371032
This spare part is a Waters Quality part
PIN SPIRAL 3.0DIA X 16.ST.STL
----
Buy Now
ESI Probe Spares Kit
Part Number: M956357DC2-S
This spare part is a Waters Quality part
ESI Probe Spares Kit
----
Buy Now
Regeneration Valve Rebuild Kit
Part Number: 700000424
Rebuilding the 2790 Two-Position Regeneration Valve involves changing the rotor seal and stator face assembly.
Regeneration Valve Rebuild Kit
----
Buy Now
2690/95 PERFORMANCE MAINTENANCE KIT
Part Number: WAT270944
The Waters® Performance Maintenance Kit for the 2690 Separations Module contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the follow...
2690/95 PERFORMANCE MAINTENANCE KIT
----
Buy Now
Plunger Seal Kit, 2/pkg
Part Number: 205000202
This spare part is a Waters Quality part
Plunger Seal Kit, 2/pkg
----
Buy Now
ACQUITY SOLVENT MANAGER PERFORMANCE MAINTENANCE KIT
Part Number: 201000173
The Waters® Performance Maintenance Kit for the ACQUITY Binary Sovent Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis.The Waters® Performance Maintenance Kit includes the fo...
ACQUITY SOLVENT MANAGER PERFORMANCE MAINTENANCE KIT
----
Buy Now
2796 Injector Rebuild Kit
Part Number: 425000327
The 2796 Injector Rebuild Kit is not interchangeable with the 2795 PM Kit. Rebuilding the Rheodyne injector valve involves changing the rotor seal and stator face assembly.
2796 Injector Rebuild Kit
----
Buy Now
Check Valve Rebuild Kit
Part Number: WAT037495
The Check Valve Rebuild Kit consists of the following parts: four seal guides, four ball and seats, four retainers, and four housing seals. It is used for both inlet and outlet check valves.
Check Valve Rebuild Kit
----
Buy Now
Reference Probe Spares Kit
Part Number: M970660BC2
Spares kit for use in maintaining and re-building a reference probe assembly. The kit includes O-rings, capillary tubes, probe tips, PEEK tubing sleeves, conductive sleeves and a PEEK micro-elbow plus nuts and micro-ferrules.
Reference Probe Spares Kit
----
Buy Now
Kit, Frit and Nut, 0.2µm, 2.1mm, 5/pkg
Part Number: 700002775
Part number 700002775 contains five 0.2µm stainless steel replacement filters and five replacement inlet nuts and are used in conjunction with the ACQUITY Column In-line filter kit (Part Number 205000343)
Kit, Frit and Nut, 0.2µm, 2.1mm, 5/pkg
----
Buy Now
Working in Academia?