Waters offers a range of MS hardware upgrades and sample inlet options that will improve your system's control and data acquisition functions, as well as increase its analytical capabilities and extend its operational lifetime.
Increase the analytical capabilities and productivity of your APGC enabled Waters Mass spectrometer by converting to APGC v2.0.
Spatial Resolution Upgrade
Replace your existing laser 200Hz or 1 KHz laser with a 2.5KHz high repetition rate solid state laser system, offering a smaller spot size (avg 60µm) and reduced ablation times for MALDI Imaging experiments.
MALDI Source: SYNAPT G2 MS/HDMS series instruments
SYNAPT G2 MS/HDMS™ series instruments upgraded with a MALDI source system provide the uncompromised exact mass characterization of compounds using MALDI-MS, MALDI-MS/MS, and MALDI-MS/IMS/MS (HDMS only) analyses.
ionKey UPLC Microflow Source Upgrade
The ionKey UPLC microflow source provides high sensitivity, quantitative, sample-limited analyses through direct non-split operation via an easy to use iKey separations device.
NanoLockSpray Exact Mass Ionization Source
The NanoLockSpray™ dual electrospray ion source accessory with optimized co-introduction of analyte and lock mass compounds provides authenticated exact mass measurement in NanoFlow™ LC/MS and LC/MS/MS modes of operation.
Atmospheric Pressure GC Source
The Atmospheric Pressure GC (APGC) source field upgrade allows laboratories to extend the capabilities of their LC-MS analytical instrumentation, by incorporating the ability to perform AP GC-MS on a single MS platform.
Atmospheric Solids Analysis Probe
The Atmospheric Solids Analysis Probe is a useful tool for the rapid direct analysis of volatile and semi-volatile solid and liquid samples using atmospheric pressure ionisation.
IonSABRE APCI Probe Accessory
APCI is an effective method for analyzing lower-polarity compounds. The high-efficiency IonSABRE™ APCI probe offers significant improvements in sensitivity compared with earlier versions of probe, particularly at higher liquid flow rates.
LockSpray Exact Mass Ionization Source
The LockSpray™ dual electrospray ion source optimizes the co-introduction of analyte and lock mass compound directly into the ion source, providing authenticated exact mass measurement in MS and MS/MS modes.