Product Listing:  Seal Wash Pump Solenoid - WAT270926 to Sep-Pak C8 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37 - 55 µm, 100/pk - WAT036785

Seal Wash Pump Solenoid - WAT270926
SKU: WAT270926
Seal Wash Pump Solenoid - WAT270926
List Price
$385.00
Category: Service Parts & Kits
Seal Wash Pump Solenoid - WAT270926: Replacement Seal Wash Pump Solenoid. Used to drive seal wash solvent through pump heads on Alliance Separations Modules, ACQUITY Solvent Managers, nanoACQUITY Solvent Managers and 25x5 Pumps.
Part Number: WAT270926
Brand: Waters Quality Parts
Replacement Schedule As Required
System HPLC, UPC2, UPLC
Type Mechanical
Units per Package 1 pk
Seal, 1.25 x 0.750 x 0.25, 4/pk - WAT005081
SKU: WAT005081
Seal, 1.25 x 0.750 x 0.25, 4/pk - WAT005081
List Price
$57.00
Category: Service Parts & Kits
Seal, 1.25 x 0.750 x 0.25, 4/pk - WAT005081: This spare part is a Waters Quality part
Part Number: WAT005081
Brand: Waters Quality Parts
Replacement Schedule As Required
System HPLC
Type Seal
Units per Package 4 pk
Seal, P-350, GFPM, Pump Piston - 700007099
SKU: 700007099
Seal, P-350, GFPM, Pump Piston - 700007099
List Price
$155.00
Category: Service Parts & Kits
Seal, P-350, GFPM, Pump Piston - 700007099: This spare part is a Waters Quality part
Part Number: 700007099
PM Kit No
Part Category Seals
Product Category SFC
Products P350 Pump
Replacement Schedule As Needed
Sep-Pak AC2 Plus Short Cartridge, 400 mg Sorbent per Cartridge, 85 µm, 50/pk - JJAN20229
SKU: JJAN20229
Sep-Pak AC2 Plus Short Cartridge, 400 mg Sorbent per Cartridge, 85 µm, 50/pk - JJAN20229
List Price
$479.00
Category: Sample Preparation & Filtration
Sep-Pak AC2 Plus Short Cartridge, 400 mg Sorbent per Cartridge, 85 µm, 50/pk - JJAN20229: Sep-Pak AC2 Plus Short cartridges contain low ash content activated carbon for applications such as the concentration of pesticides and herbicides in water or food samples. Sep-Pak AC2 is used in Japan Pesticide Method #17. These short body cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.
Part Number: JJAN20229
Brand: Sep-Pak
Chemistry AC2
Format Plus Short Cartridge
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 85 µm
Sorbent Substrate Activated Carbon
Sorbent Weight 400 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 12 pH
pH Range Min 1 pH
Sep-Pak Accell Plus CM 12 cc Vac Cartridge, 2 g Sorbent per Cartridge, 37 - 55 µm, 20/pk - WAT054635
SKU: WAT054635
Sep-Pak Accell Plus CM 12 cc Vac Cartridge, 2 g Sorbent per Cartridge, 37 - 55 µm, 20/pk - WAT054635
List Price
$230.00
Category: Sample Preparation & Filtration
Sep-Pak Accell Plus CM 12 cc Vac Cartridge, 2 g Sorbent per Cartridge, 37 - 55 µm, 20/pk - WAT054635: Sep-Pak Accell Plus CM Vac cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
Part Number: WAT054635
Brand: Sep-Pak
Barrel Size 12 cc
Chemistry Accell Plus CM
Format Vac Cartridge
Hold up volume 3.5 mL
Ion Exchange Capacity 370 µeq/gram
Mass Spec Compatibility Yes
Mode Ion-Exchange
Particle Size 37-55 µm
Pore Size 300 Å
Sorbent Substrate Silica
Sorbent Weight 2 g
Units per Package 20 pk
Water Wettable Yes
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak Accell Plus CM 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020855
SKU: WAT020855
Sep-Pak Accell Plus CM 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020855
List Price
$180.00
Category: Sample Preparation & Filtration
Sep-Pak Accell Plus CM 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020855: Sep-Pak Accell Plus CM Vac cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
Part Number: WAT020855
Brand: Sep-Pak
Barrel Size 3 cc
Chemistry Accell Plus CM
Format Vac Cartridge
Hold up volume 1.1 mL
Ion Exchange Capacity 370 µeq/gram
Mass Spec Compatibility Yes
Mode Ion-Exchange
Particle Size 37-55 µm
Pore Size 300 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 50 pk
Water Wettable Yes
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak Accell Plus CM Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020550
SKU: WAT020550
Sep-Pak Accell Plus CM Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020550
List Price
$216.00
Category: Sample Preparation & Filtration
Sep-Pak Accell Plus CM Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020550: Sep-Pak Accell Plus CM Plus Short cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These cartridges are provided in the short-body configurations for easily attachment to pumps and syringes. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.
Part Number: WAT020550
Brand: Sep-Pak
Chemistry Accell Plus CM
Format Plus Short Cartridge
Hold up volume 0.8 mL
Ion Exchange Capacity 370 µeq/gram
Mass Spec Compatibility Yes
Mode Ion-Exchange
Particle Size 37-55 µm
Pore Size 300 Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units per Package 50 pk
Water Wettable Yes
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - 186004051
SKU: 186004051
Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - 186004051
List Price
$227.00
Category: Sample Preparation & Filtration
Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - 186004051: Sep-Pak Accell Plus QMA Carbonate Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with a large pore size (300Å) and a carbonate counter-ion. These cartridges are used for extraction of anionic analytes in aqueous and non-aqueous solutions when the chloride counter-ion in the standard Sep-Pak Accell Plus QMA cartridges interferes with the analysis. These Light-style cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.
Part Number: 186004051
Brand: Sep-Pak
Chemistry Accell Plus QMA Carbonate
Endcapped No
Format Plus Light Cartridge
Hold up volume 0.4 mL
Ion Exchange Capacity 230 µeq/gram
Mass Spec Compatibility Yes
Mode Ion-Exchange
Particle Size 37-55 µm
Pore Size 300 Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units per Package 50 pk
Water Wettable Yes
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 46 mg Sorbent per Cartridge, 40 µm, 50/pk - 186004540
SKU: 186004540
Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 46 mg Sorbent per Cartridge, 40 µm, 50/pk - 186004540
List Price
$227.00
Category: Sample Preparation & Filtration
Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 46 mg Sorbent per Cartridge, 40 µm, 50/pk - 186004540: Sep-Pak Accell Plus QMA Carbonate Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with a large pore size (300Å) and a carbonate counter-ion. These cartridges are used for extraction of anionic analytes in aqueous and non-aqueous solutions when the chloride counter-ion in the standard Sep-Pak Accell Plus QMA cartridges interferes with the analysis. These Light-style cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.
Part Number: 186004540
Brand: Sep-Pak
Chemistry Accell Plus QMA Carbonate
Endcapped No
Format Plus Light Cartridge
Hold up volume 0.15 mL
Ion Exchange Capacity 230 µeq/gram
Mass Spec Compatibility Yes
Mode Ion-Exchange
Particle Size 40 µm
Pore Size 300 Å
Sorbent Substrate Silica
Sorbent Weight 46 mg
Units per Package 50 pk
Water Wettable Yes
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak Accell Plus QMA Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020545
SKU: WAT020545
Sep-Pak Accell Plus QMA Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020545
List Price
$216.00
Category: Sample Preparation & Filtration
Sep-Pak Accell Plus QMA Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020545: Sep-Pak Accell Plus QMA Plus Short cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of larger molecules such as anionic proteins such as immunoglobulins and enzymes. Other applications include isolation of phenolic compounds and removal of acidic pigments in wine, fruit juices, and food extracts. These versatile cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.
Part Number: WAT020545
Brand: Sep-Pak
Chemistry Accell Plus QMA
Format Plus Short Cartridge
Hold up volume 0.8 mL
Ion Exchange Capacity 230 µeq/gram
Mass Spec Compatibility Yes
Mode Ion-Exchange
Particle Size 37-55 µm
Pore Size 300 Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units per Package 50 pk
Water Wettable Yes
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak Alumina N Classic Cartridge, 1850 mg Sorbent per Cartridge, 50 - 300 µm, 50/pk - WAT051810
SKU: WAT051810
Sep-Pak Alumina N Classic Cartridge, 1850 mg Sorbent per Cartridge, 50 - 300 µm, 50/pk - WAT051810
List Price
$221.00
Category: Sample Preparation & Filtration
Sep-Pak Alumina N Classic Cartridge, 1850 mg Sorbent per Cartridge, 50 - 300 µm, 50/pk - WAT051810: Sep-Pak Alumina N Classic cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. These Classic-style cartridges are designed for use with positive displacement by a Luer-tip syringe and can also attach easily to vacuum-assisted flow devices using a male/male adaptor.
Part Number: WAT051810
Brand: Sep-Pak
Chemistry Alumina N
Format Classic Cartridge
Hold up volume 1.8 mL
Mass Spec Compatibility Yes
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120 Å
Sorbent Substrate Alumina
Sorbent Weight 1850 mg
Units per Package 50 pk
Water Wettable Yes
pH Range Max 10 pH
pH Range Min 0 pH
Sep-Pak Alumina N Plus Long Cartridge, 1710 mg Sorbent per Cartridge, 50 - 300 µm, 50/pk - WAT020510
SKU: WAT020510
Sep-Pak Alumina N Plus Long Cartridge, 1710 mg Sorbent per Cartridge, 50 - 300 µm, 50/pk - WAT020510
List Price
$206.00
Category: Sample Preparation & Filtration
Sep-Pak Alumina N Plus Long Cartridge, 1710 mg Sorbent per Cartridge, 50 - 300 µm, 50/pk - WAT020510: Sep-Pak Alumina N Plus Long cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. These versatile Plus Long cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.
Part Number: WAT020510
Brand: Sep-Pak
Chemistry Alumina N
Format Plus Long Cartridge
Hold up volume 1.2 mL
Mass Spec Compatibility Yes
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120 Å
Sorbent Substrate Alumina
Sorbent Weight 1710 mg
Units per Package 50 pk
Water Wettable Yes
pH Range Max 10 pH
pH Range Min 0 pH
Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020840
SKU: WAT020840
Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020840
List Price
$165.00
Category: Sample Preparation & Filtration
Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020840: Sep-Pak Amino Propyl (NH2) Vac cartridges contain a moderately polar, silica-based bonded phase with weakly basic surface. The sorbent can be used as a polar sorbent with different selectivity for acidic/basic analytes or as a weak anion exchanges in aqueous medium below pH 8. Applications include extraction of phenols and phenolic pigments, petroleum fractionation, saccharides and drugs and metabolites. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
Part Number: WAT020840
Brand: Sep-Pak
Barrel Size 3 cc
Chemistry Aminopropyl (NH2)
Endcapped No
Format Vac Cartridge
Hold up volume 0.8 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak Aminopropyl (NH2) Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020535
SKU: WAT020535
Sep-Pak Aminopropyl (NH2) Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020535
List Price
$206.00
Category: Sample Preparation & Filtration
Sep-Pak Aminopropyl (NH2) Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020535: Sep-Pak Amino Propyl (NH2) Plus Short cartridges contain a moderately polar, silica-based bonded phase with weakly basic surface. The sorbent can be used as a polar sorbent with different selectivity for acidic/basic analytes or as a weak anion exchanges in aqueous medium below pH 8. Applications include extraction of phenols and phenolic pigments, petroleum fractionation, saccharides and drugs and metabolites. These versatile cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.
Part Number: WAT020535
Brand: Sep-Pak
Chemistry Aminopropyl (NH2)
Endcapped No
Format Plus Short Cartridge
Hold up volume 0.7 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55 - 105 µm, 100/pk - WAT023590
SKU: WAT023590
Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55 - 105 µm, 100/pk - WAT023590
List Price
$185.00
Category: Sample Preparation & Filtration
Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55 - 105 µm, 100/pk - WAT023590: Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The Sep-Pak C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
Part Number: WAT023590
Brand: Sep-Pak
Barrel Size 1 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 0.2 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units per Package 100 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 1 cc Vac Cartridge, 50 mg Sorbent per Cartridge, 55 - 105 µm, 100/pk - WAT054955
SKU: WAT054955
Sep-Pak C18 1 cc Vac Cartridge, 50 mg Sorbent per Cartridge, 55 - 105 µm, 100/pk - WAT054955
List Price
$170.00
Category: Sample Preparation & Filtration
Sep-Pak C18 1 cc Vac Cartridge, 50 mg Sorbent per Cartridge, 55 - 105 µm, 100/pk - WAT054955: Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The Sep-Pak C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
Part Number: WAT054955
Brand: Sep-Pak
Barrel Size 1 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 0.13 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 50 mg
Units per Package 100 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 20 cc Vac Cartridge, 5 g Sorbent per Cartridge, 55 - 105 µm, 20/pk - WAT036925
SKU: WAT036925
Sep-Pak C18 20 cc Vac Cartridge, 5 g Sorbent per Cartridge, 55 - 105 µm, 20/pk - WAT036925
List Price
$258.00
Category: Sample Preparation & Filtration
Sep-Pak C18 20 cc Vac Cartridge, 5 g Sorbent per Cartridge, 55 - 105 µm, 20/pk - WAT036925: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT036925
Brand: Sep-Pak
Barrel Size 20 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 8 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 5 g
Units per Package 20 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT054945
SKU: WAT054945
Sep-Pak C18 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT054945
List Price
$134.00
Category: Sample Preparation & Filtration
Sep-Pak C18 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT054945: Silica-based octadecyl bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages.
Part Number: WAT054945
Brand: Sep-Pak
Barrel Size 3 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 0.42 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 200 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020805
SKU: WAT020805
Sep-Pak C18 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020805
List Price
$149.00
Category: Sample Preparation & Filtration
Sep-Pak C18 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020805: Silica-based octadecyl bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages.
Part Number: WAT020805
Brand: Sep-Pak
Barrel Size 3 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 0.8 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 35 cc Vac Cartridge, 10 g Sorbent per Cartridge, 55 - 105 µm, 10/pk - WAT043345
SKU: WAT043345
Sep-Pak C18 35 cc Vac Cartridge, 10 g Sorbent per Cartridge, 55 - 105 µm, 10/pk - WAT043345
List Price
$216.00
Category: Sample Preparation & Filtration
Sep-Pak C18 35 cc Vac Cartridge, 10 g Sorbent per Cartridge, 55 - 105 µm, 10/pk - WAT043345: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT043345
Brand: Sep-Pak
Barrel Size 35 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 16.8 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 10 g
Units per Package 10 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-pak C18 3cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036945
SKU: WAT036945
Sep-pak C18 3cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036945
List Price
$175.00
Category: Sample Preparation & Filtration
Sep-pak C18 3cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036945: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT036945
Brand: Sep-Pak
Barrel Size 3 cc
Chemistry C18
Endcapped Yes
Format Vac RC Cartridge
Hold up volume 0.8 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 55 - 105 µm, 30/pk - WAT036905
SKU: WAT036905
Sep-Pak C18 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 55 - 105 µm, 30/pk - WAT036905
List Price
$134.00
Category: Sample Preparation & Filtration
Sep-Pak C18 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 55 - 105 µm, 30/pk - WAT036905: Silica-based octadecyl bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages.
Part Number: WAT036905
Brand: Sep-Pak
Barrel Size 6 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 2 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 1 g
Units per Package 30 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 30/pk - WAT043395
SKU: WAT043395
Sep-Pak C18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 30/pk - WAT043395
List Price
$124.00
Category: Sample Preparation & Filtration
Sep-Pak C18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 30/pk - WAT043395: Silica-based octadecyl bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages.
Part Number: WAT043395
Brand: Sep-Pak
Barrel Size 6 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 1.2 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 30 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 300/pk - 186006325
SKU: 186006325
Sep-Pak C18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 300/pk - 186006325
List Price
$1133.00
Category: Sample Preparation & Filtration
Sep-Pak C18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 300/pk - 186006325: Silica-based octadecyl bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages.
Part Number: 186006325
Brand: Sep-Pak
Barrel Size 6 cc
Chemistry C18
Endcapped Yes
Format Vac Cartridge
Hold up volume 1.2 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 300 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 Classic Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT051910
SKU: WAT051910
Sep-Pak C18 Classic Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT051910
List Price
$221.00
Category: Sample Preparation & Filtration
Sep-Pak C18 Classic Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT051910: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT051910
Brand: Sep-Pak
Chemistry C18
Endcapped Yes
Format Classic Cartridge
Hold up volume 0.85 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT023501
SKU: WAT023501
Sep-Pak C18 Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT023501
List Price
$185.00
Category: Sample Preparation & Filtration
Sep-Pak C18 Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT023501: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT023501
Brand: Sep-Pak
Chemistry C18
Endcapped Yes
Format Plus Light Cartridge
Hold up volume 0.3 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT023635
SKU: WAT023635
Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT023635
List Price
$268.00
Category: Sample Preparation & Filtration
Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT023635: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT023635
Brand: Sep-Pak
Chemistry C18
Endcapped Yes
Format Plus Long Cartridge
Hold up volume 1.6 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 820 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020515
SKU: WAT020515
Sep-Pak C18 Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020515
List Price
$206.00
Category: Sample Preparation & Filtration
Sep-Pak C18 Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020515: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT020515
Brand: Sep-Pak
Chemistry C18
Endcapped Yes
Format Plus Short Cartridge
Hold up volume 0.7 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C18 Vac RC Cartridge, 100 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036935
SKU: WAT036935
Sep-Pak C18 Vac RC Cartridge, 100 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036935
List Price
$129.00
Category: Sample Preparation & Filtration
Sep-Pak C18 Vac RC Cartridge, 100 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036935: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT036935
Brand: Sep-Pak
Chemistry C18
Endcapped Yes
Format Vac RC Cartridge
Hold up volume 0.2 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Sep-Pak C8 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37 - 55 µm, 100/pk - WAT036785
SKU: WAT036785
Sep-Pak C8 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37 - 55 µm, 100/pk - WAT036785
List Price
$185.00
Category: Sample Preparation & Filtration
Sep-Pak C8 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37 - 55 µm, 100/pk - WAT036785: Silica-based bonded phase with moderate hydrophobicity; use for methods requiring less retention than C18; typical applications include drugs and their metabolites in serum, plasma or urine, peptides in serum, plasma.
Part Number: WAT036785
Brand: Sep-Pak
Barrel Size 1 cc
Chemistry C8
Endcapped Yes
Format Vac Cartridge
Hold up volume 0.25 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units per Package 100 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH