Product Listing:  Flowcell, Analytical, 10 mm - WAT057919 to Kit, I-Class PEEK Needle 10μL - 700005923

Flowcell, Analytical, 10 mm - WAT057919

Flowcell, Analytical, 10 mm - WAT057919: Replacement Analytical Flow Cell Assembly. The Analytical Flow Cell Assembly has a Reverse Taper Beam flow cell design with a 10mm path length and a pressure rating of 1000psi. Used with the 2996 PDA Detector.

Flowcell, Analytical, 10 mm - WAT080733

Flowcell, Analytical, 10 mm - WAT080733: The Analytical Flow Cell Assembly for the 486 detector has a 10mm path length and a pressure limit of 1000psi.

Flowcell, High Pressure Taper Slit - WAT081321

Flowcell, High Pressure Taper Slit - WAT081321: The Waters®TaperSlit™ Flow Cell design used in the 2487 detector renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® High Pressure TaperSlit™ Flow Cell for LCMS, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The High Pressure Cell for LCMS has a 10mm path length and a cell volume of 10µL.

Flowcell, Inert Taper Slit - WAT081157

Flowcell, Inert Taper Slit - WAT081157: The Waters®TaperSlit™ Flow Cell design used in the 2487 detector renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® Inert TaperSlit™ Flow Cell, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The Inert Cell has a 10mm path length and a cell volume of 10µL.

Flowcell, Semi-Prep Taper Slit - WAT081158

Flowcell, Semi-Prep Taper Slit - WAT081158: The Waters®TaperSlit™ Flow Cell design used in the 2487 detector renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® Semi-Prep TaperSlit™ Flow Cell, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The Semi-Prep Cell has a 3mm path length and a cell volume of 2.6µL.

Flowcell, Semi-Prep, 3 mm - WAT080734

Flowcell, Semi-Prep, 3 mm - WAT080734: The Semi-Prep Flow Cell Assembly for the 486 detector has a 3mm path length and a pressure limit of 1000psi. The sample tubing used in the flow cell has 0.040 inches inner diameter to accomodate the large flow rates.

Frit, 0.2 µL, 2.1 mm, 12/pk - 700005698

Frit, 0.2 µL, 2.1 mm, 12/pk - 700005698: Replacement 0.2µm Frit, 2.1mm. Kit contains 12 frits. The frit can also be purchased in a Pack of 5 with associated Nut via 700002775. Frit & Nut are both part of 205000343 ACQUITY In Line Filter Assembly.

Fuse, 2A, micro - WAS290423

Fuse, 2A, micro - WAS290423: This spare part is a Waters Quality part

Fuse, 5.0A, 250V, 5 x 20 mm, Fast Acting - WAT163-18

Fuse, 5.0A, 250V, 5 x 20 mm, Fast Acting - WAT163-18: This spare part is a Waters Quality part

Fuse, 7A, Micro - WAT290188

Fuse, 7A, Micro - WAT290188: This spare part is a Waters Quality part

Gasket, Ion Block - 700009603

Gasket, Ion Block - 700009603: This spare part is a Waters Quality part

GPV Assembly - WAT270927

GPV Assembly - WAT270927: Replacement Gradient Proportioning Valve (GPV) Assembly. The GPV features opening and closing rates and aperture sizes of an exceptionally tight tolerance. The four inlet valves are actuated by solenoids that have precise electrical characteristics to help reduce heat buildup and protect the system from outgassing. The gradient proportioning valve provides exact, reproducible mixing of up to four different solvents. Used in Alliance Separation Modules.

Gradient Proportioning Valve - WAT082823

Gradient Proportioning Valve - WAT082823: The Gradient Proportioning Valve Assembly is a set of four 2-way valves, which features opening and closing rates and aperture sizes of an exceptionally tight tolerance. The four inlet valves are actuated by solenoids that have precise electrical characteristics to help reduce heat buildup and protect the system from outgassing. The gradient proportioning valve provides exact, reproducible mixing of up to four different solvents.

High Flow Nebulizer - 205000458

High Flow Nebulizer - 205000458: This part number 205000458 replaces the original part number 700002388.

High Pressure Filter Assembly - 700002742

High Pressure Filter Assembly - 700002742: Replacement High Pressure Filter Assembly. Located behind the front panel, the high pressure filter assembly (pulse dampner) reduces the pressure pulsations in the HPLC pump. This item replaced WAS207072.

High Pressure Motorized Valve Assembly - WAT045438

High Pressure Motorized Valve Assembly - WAT045438: The High Pressure Motorized Valve (HPMV) is a three-way valve that has two common ports and one controllable port. The HPMV is used in two of the three valve positions in the Fluids Pak: V1 (High Pressure Inject Valve) and V2 (High Pressure Syringe Valve). The basic valve is driven by a stepper motor. Used on 717 PLUS Autosamplers and Alliance 2695 & 2695D Separation Modules.

High Sensitivity Filter Mixer, 425µL - 205000403

High Sensitivity Filter Mixer, 425µL - 205000403: ACQUITY High Sensitivity Filter Mixer

HPMV Tool Kit - WAT045427

HPMV Tool Kit - WAT045427: This kit contains the special tools required to install the seals that came in the HP Valve Rebuild Kit (WAT045424). The kit contains the following tools: seal punch, seal guide, wood screw.

I-Class SM-FTN Seat Port Assembly, 0.003ID - 700006056

I-Class SM-FTN Seat Port Assembly, 0.003ID - 700006056: ACQUITY I-Class SM-FTN Seal Extension Tube, .003ID

i2 Valve - 700005162

i2 Valve - 700005162: Replacement i2V assembly. Used on H-Class Quaternary Solvent Managers and APC Isocratic Solvent Manager.

i2V Assembly, BioACQUITY - 700005412

i2V Assembly, BioACQUITY - 700005412: Replacement i2V assembly. Used on H-Class Bio Quaternary Solvent Managers and M-Class Binary and Auxilliary Solvent Managers.

Injection Valve Cartridge, Fixed Loop, 18 Kpsi - 700006069

Injection Valve Cartridge, Fixed Loop, 18 Kpsi - 700006069: Replacement Injection Valve Cartridge, 18KPSI. Used in I-Class Fixed Loop (FL) Sample Managers.

Injector Cartridge, FTN, 18 Kpsi - 700006057

Injector Cartridge, FTN, 18 Kpsi - 700006057: Replacement Injection Valve Cartridge, 18KPSI. Used in I-Class Flow through Needle (FTN) Sample Managers.

Inlet Manifold, ACQUITY H-Class Bio - 700005417

Inlet Manifold, ACQUITY H-Class Bio - 700005417: This spare part is a Waters Quality part

Inline Filter Assembly - 700001550

Inline Filter Assembly - 700001550: The In-Line Filter prevents particles from entering the system.

Inline Precolumn Filter Kit - WAT084560

Inline Precolumn Filter Kit - WAT084560: The In-Line Precolumn Filter is a 2µm filter that is placed before the column to help extend the life and preserve the chemistry of the column.

Ion Block Heater Cartridge Assembly - 700001201

Ion Block Heater Cartridge Assembly - 700001201: The Ion Block Heater Assembly is a heater cartridge that inserts into the stainless steel Ion Block.

Kit, ACQUITY Column In-Line Filter - 205000343

Kit, ACQUITY Column In-Line Filter - 205000343: Waters recommends you filter buffers and samples using a 0.2µm filter prior to using ACQUITY UPLC™ BEH columns. Filtration protects the columns and instrument components from a build-up of particulate matter, improving column lifetime and minimizing system downtime. The ACQUITY UPLC™ column In-line filter kit comes complete with the holder and five 0.2µm stainless steel replacement filters. You can order a a package of five replacement filters using Part Number 700002775 which will work with the in-line filter kit.

Kit, Frit and Nut, 0.2 µL, 2.1 mm, 5/pk - 700002775

Kit, Frit and Nut, 0.2 µL, 2.1 mm, 5/pk - 700002775: Part number 700002775 contains five 0.2µm stainless steel replacement filters and five replacement inlet nuts and are used in conjunction with the ACQUITY UPLC™column in-line filter unit (Part Number 205000343)

Kit, I-Class PEEK Needle 10μL - 700005923

Kit, I-Class PEEK Needle 10μL - 700005923: Replacement 10ul PEEK needle assembly. Used in ACQUITY I-Class Fixed Loop (FL) Sample Managers.