Product Listing:  PIC Reagent B7 - WAT085103 to SunFire C8 Column, 100Å, 3.5 µm, 4.6 mm X 150 mm, 1/pk - 186002732

PIC Reagent B7 - WAT085103

PIC Reagent B7 - WAT085103: Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC B7 is a 5 vials/pkg workable solution in UV range in mobile phase of 240+ nm.

Polypropylene 12 x 32 mm Screw Neck Vial, 300 µL Volume, 100/pk - 186002626

Polypropylene 12 x 32 mm Screw Neck Vial, 300 µL Volume, 100/pk - 186002626: Clean polypropylene-molded vial, preferred in applications where there is a concern that compound or molecule may stick to a polar glass surface. This vial is a cost effective alternative to glass.

Polypropylene 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 300 µL Volume, 100/pk - 186002639

Polypropylene 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 300 µL Volume, 100/pk - 186002639: Clean polypropylene-molded vial, preferred in applications where there is a concern that compound or molecule may stick to a polar glass surface. This vial is a cost effective alternative to glass.

Polypropylene 12 x 32 mm Screw Neck Vial, with Cap and PTFE/Silicone Septum, 300 µL Volume, 100/pk - 186002640

Polypropylene 12 x 32 mm Screw Neck Vial, with Cap and PTFE/Silicone Septum, 300 µL Volume, 100/pk - 186002640: Clean polypropylene-molded vial, preferred in applications where there is a concern that compound or molecule may stick to a polar glass surface. This vial is a cost effective alternative to glass.

Pullulan Kit - WAT034207

Pullulan Kit - WAT034207: A unique collection of GFC standards for molecular weight determination. 8 Pullulan Standards for aqueous MW Testing at 200mg each of approximate molecular weight standards 5000, 10000, 20000, 50000, 100000, 200000, 400000, 800000

Sample Collection Plate Sealing Cap - WAT058959

Sample Collection Plate Sealing Cap - WAT058959: Waters offers a selection of 96-and 384-well sample/collection plates along with cap mats and heat seals.

UV Detector Linearity Standards Kit - WAT042881

UV Detector Linearity Standards Kit - WAT042881: Kit contains standards appropriate for assessment of UV. 7 Ampules (10 ml standard solutions contains): Ampule 1 100% Methanol Ampule 2 5.0 mg/L Propyl Paraben (+/-1%) Ampule 3 10.0 mg/L Propyl Paraben (+/-1%) Ampule 4 15.0 mg/L Propyl Paraben (+/-1%) Ampule 5 20.0 mg/L Propyl Paraben (+/-1%) Ampule 6 25.0 mg/L Propyl Paraben (+/-1%) Ampule 7 30.0 mg/L Propyl Paraben (+/-1%) Propyl Paraben Purity (99%). All standards are in 100% HPLC Grade Methanol. Certificate of Analysis

UV Detector PQ Standard - WAT042887

UV Detector PQ Standard - WAT042887: Kit contains standards appropriate for assessment of HPLC UV systems. 1 Ampule (10 mL standard solution contains): - 10.00 mg/L Acetophenone (+/- 5%) Purity > 99% - 10.00 mg/L Propiophenone (+/- 5%) Purity > 99% - 10.00 mg/L Butyrophenone (+/- 5%) Purity > 99% - 3.2 g/L Acetone (+/- 5%) Purity > 99.74% Solution in 60% HPLC Grade Methanol / 40% HPLC Grade Water, volume/volume.

UV Wavelength Accuracy (erbium perchlorate) - WAT042885

UV Wavelength Accuracy (erbium perchlorate) - WAT042885: Kit contains standards appropriate for assessment of UV Detector. 1X10mL standard solution contains: 10.0 gm/L Erbuim Perchlorate +/-5%) (Purity >=99.9%) in 100% HPLC Grade Water

2-AB Glycan Performance Test Standard - 186006349

2-AB Glycan Performance Test Standard - 186006349: The 2-AB Glycan Performance Test Standard is 2-AB labeled Human IgG and is QC verified to contain the components needed to benchmark and evaluate ACQUITY UPLC BEH Glycan, 1.7 µm Columns. It comes in a Waters TruView vial as a lyophilized powder. There is 228 pmol total/vial. It is recommended that this standard be used on a regular basis for benchmarking column and system performance, similar to the QCRM product line.

2.1 mm x 10 mm Holder Kit for Cartridges and Guard Columns - WAT097958

2.1 mm x 10 mm Holder Kit for Cartridges and Guard Columns - WAT097958: The Sentry guard column holder is required for use with Sentry guard columns that have a 2.1 mm I.D. and a length of 10 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry guard column holders can be used with any HPLC column regardless of the manufacturer. Replacement o-rings (WAT097954, 2/pk) can be purchased to ensure a leak-free connection.

96-well Sample Collection Plate, 1 mL, 50/pk - WAT058957

96-well Sample Collection Plate, 1 mL, 50/pk - WAT058957: Waters offers a selection of 96-and 384-well sample/collection plates along with cap mats and heat seals.

96-well Sample Collection Plate, 2 mL, 50/pk - WAT058958

96-well Sample Collection Plate, 2 mL, 50/pk - WAT058958: Waters offers a selection of 96-and 384-well sample/collection plates along with cap mats and heat seals.

Ultrahydrogel Column, 10 µm, 7.8 mm X 300 mm, 1K - 7M, 1/pk - WAT011545

Ultrahydrogel Column, 10 µm, 7.8 mm X 300 mm, 1K - 7M, 1/pk - WAT011545: Ideal for the analysis of aqueous-soluble samples, such as; oligomers; oligosaccharides; polysaccharides; and cationic, anionic and amphoteric polymers.

Ultrahydrogel Column, 120Å, 6 µm, 7.8 mm X 300 mm, 100 - 5K, 1/pk - WAT011520

Ultrahydrogel Column, 120Å, 6 µm, 7.8 mm X 300 mm, 100 - 5K, 1/pk - WAT011520: Ideal for the analysis of aqueous-soluble samples, such as; oligomers; oligosaccharides; polysaccharides; and cationic, anionic and amphoteric polymers.

TruView LCMS Certified Clear Glass 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk - 186005666CV

TruView LCMS Certified Clear Glass 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk - 186005666CV: TruView LCMS Certified vials are produced following tightly controlled manufacturing processes and handling procedures. They are tested for cleanliness by mass spectrometers and for low analyte adsorption by ACQUITY/MS/MS.

Symmetry C18 Column, 100Å, 3.5 µm, 4.6 mm X 50 mm, 1/pk - WAT200625

Symmetry C18 Column, 100Å, 3.5 µm, 4.6 mm X 50 mm, 1/pk - WAT200625: Symmetry C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results.

Symmetry C18 Column, 100Å, 3.5 µm, 4.6 mm X 75 mm, 1/pk - WAT066224

Symmetry C18 Column, 100Å, 3.5 µm, 4.6 mm X 75 mm, 1/pk - WAT066224: Symmetry C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results.

Symmetry C18 Column, 100Å, 5 µm, 3.9 mm X 150 mm, 1/pk - WAT046980

Symmetry C18 Column, 100Å, 5 µm, 3.9 mm X 150 mm, 1/pk - WAT046980: Symmetry C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results.

Symmetry C18 Column, 100Å, 5 µm, 4.6 mm X 150 mm, 1/pk - WAT045905

Symmetry C18 Column, 100Å, 5 µm, 4.6 mm X 150 mm, 1/pk - WAT045905: Symmetry C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results.

Symmetry C18 Column, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pk - WAT054275

Symmetry C18 Column, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pk - WAT054275: Symmetry columns continues to set the standard for HPLC drug assays, giving you confidence in the long-term compliance of your HPLC methods. No need to compromise on peak shape, selectivity, column-to-column and batch-to-batch reproducibility, or other critical performance characteristics. Available in a variety of particle sizes, chemistries and dimensions.

Symmetry C18 Sentry Guard Cartridge, 100Å, 5 µm, 3.9 mm X 20 mm, 2/pk - WAT054225

Symmetry C18 Sentry Guard Cartridge, 100Å, 5 µm, 3.9 mm X 20 mm, 2/pk - WAT054225: Symmetry C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results.

Symmetry Shield RP8 Column, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pk - WAT200670

Symmetry Shield RP8 Column, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pk - WAT200670: These reversed-phase columns contain Waters patented embedded polar group technology that “shields” the silica’ residual silanol surface from highly basic analytes. The reduced silanol activity for the SymmetryShield RP8 column significantly improves peak shape and resolution.

SunFire C18 Column, 100Å, 3.5 µm, 4.6 mm X 100 mm, 1/pk - 186002553

SunFire C18 Column, 100Å, 3.5 µm, 4.6 mm X 100 mm, 1/pk - 186002553: SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

SunFire C18 Column, 100Å, 3.5 µm, 4.6 mm X 150 mm, 1/pk - 186002554

SunFire C18 Column, 100Å, 3.5 µm, 4.6 mm X 150 mm, 1/pk - 186002554: SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

SunFire C18 Column, 100Å, 3.5 µm, 4.6 mm X 50 mm, 1/pk - 186002551

SunFire C18 Column, 100Å, 3.5 µm, 4.6 mm X 50 mm, 1/pk - 186002551: SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

SunFire C18 Column, 100Å, 5 µm, 4.6 mm X 150 mm, 1/pk - 186002559

SunFire C18 Column, 100Å, 5 µm, 4.6 mm X 150 mm, 1/pk - 186002559: SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

SunFire C18 Column, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pk - 186002560

SunFire C18 Column, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pk - 186002560: SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

SunFire C18 Sentry Guard Cartridge, 100Å, 5 µm, 4.6 mm X 20 mm, 2/pk - 186002684

SunFire C18 Sentry Guard Cartridge, 100Å, 5 µm, 4.6 mm X 20 mm, 2/pk - 186002684: SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

SunFire C8 Column, 100Å, 3.5 µm, 4.6 mm X 150 mm, 1/pk - 186002732

SunFire C8 Column, 100Å, 3.5 µm, 4.6 mm X 150 mm, 1/pk - 186002732: SunFire C8 columns are used for general purpose method development at low pH. The C8 ligand is preferred for some assays because it is less hydrophobic and therefore less retentive compared to SunFire C18.