Product Listing:  Polypropylene 12 x 32 mm Screw Neck Vial, with Cap and PTFE/Silicone Septum, 300 µL Volume, 100/pk - 186002640 to Flow Splitter, 8.0-30mL, 1000:1 - 205000437

Polypropylene 12 x 32 mm Screw Neck Vial, with Cap and PTFE/Silicone Septum, 300 µL Volume, 100/pk - 186002640

Polypropylene 12 x 32 mm Screw Neck Vial, with Cap and PTFE/Silicone Septum, 300 µL Volume, 100/pk - 186002640: Clean polypropylene-molded vial, preferred in applications where there is a concern that compound or molecule may stick to a polar glass surface. This vial is a cost effective alternative to glass.

Blue, 12 x 32 mm Screw Neck Cap and PTFE/Silicone Septum, 100/pk - 186000274

Buy Blue, 12 x 32 mm Screw Neck Cap and PTFE/Silicone Septum, 100/pk - 186000274 from Waters

Polypropylene 12 x 32 mm Screw Neck Vial, 300 µL Volume, 100/pk - 186002626

Polypropylene 12 x 32 mm Screw Neck Vial, 300 µL Volume, 100/pk - 186002626: Clean polypropylene-molded vial, preferred in applications where there is a concern that compound or molecule may stick to a polar glass surface. This vial is a cost effective alternative to glass.

Viridis BEH OBD Prep Column, 130Å, 5 µm, 30 mm X 250 mm, 1/pk - 186005739

Viridis BEH OBD Prep Column, 130Å, 5 µm, 30 mm X 250 mm, 1/pk - 186005739: Designed and tested for SFC, the Viridis 5 µm columns demonstrate a wide range of selectivity for greater resolution. The reduction and control of surface silanol activity on Viridis Hybrid particles delivers, under SFC conditions, excellent peak shapes — without the use of mobile-phase additives — even for well-retained basic achiral compounds.

XBridge BEH C18 OBD Prep Column, 130Å, 5 µm, 30 mm X 250 mm, 1/pk - 186004025

XBridge BEH C18 OBD Prep Column, 130Å, 5 µm, 30 mm X 250 mm, 1/pk - 186004025: As a workhorse for HPLC method development, XBridge BEH C18 sorbent can be used over an entire range of mobile phase pH (1-12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed.

Viridis Silica 2-Ethylpyridine OBD Prep Column, 100Å, 5 µm, 50 mm X 150 mm, 1/pk - 186004954

Viridis Silica 2-Ethylpyridine OBD Prep Column, 100Å, 5 µm, 50 mm X 150 mm, 1/pk - 186004954: Combining state-of-the-art media manufacturing with the industry leading column technology, Viridis Supercritical Fluid Chromatography (SFC) columns bring a new level of reproducibility to the world of laboratory scale purification. Viridis SFC columns are available for analytical and preparative chromatography as Viridis SFC 2-Ethylpyridine columns and Viridis SFC Silica columns. Larger preparative column formats are manufactured using Waters patented Optimum Bed Density (OBD) Technology. 2-Ethylpyridine chemistry is successfully used for a wide range of achiral SFC applications due to its retention, peak shape and selectivity properties. Viridis SFC 2-ethylpyridine columns also provide high reliability and reproducibility and can be used for analytical and preparative applications. Based on Waters long history of chromatographic silica production, the Viridis SFC Silica columns are designed to be highly reproducible and predictable based on tight product specifications and very low metal content.

ACQUITY Online SPE Manager Performance Maintenance Kit - 201000250

ACQUITY Online SPE Manager Performance Maintenance Kit - 201000250: The Waters® Performance Maintenance Kit for the ACQUITY UPLC Online SPE Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: punches, HPD syringe, tube assys, injector pod and rotor seals.

Probe Adjuster Assembly (LCZ/ZMD/Ultima) - 700000436

Probe Adjuster Assembly (LCZ/ZMD/Ultima) - 700000436: This spare part is a Waters Quality part

Viridis BEH OBD Prep Column, 130Å, 5 µm, 50 mm X 100 mm, 1/pk - 186005741

Viridis BEH OBD Prep Column, 130Å, 5 µm, 50 mm X 100 mm, 1/pk - 186005741: Designed and tested for SFC, the Viridis 5 µm columns demonstrate a wide range of selectivity for greater resolution. The reduction and control of surface silanol activity on Viridis Hybrid particles delivers, under SFC conditions, excellent peak shapes — without the use of mobile-phase additives — even for well-retained basic achiral compounds.

Empower 3 Enterprise System Suitability - 667003976

Empower 3 Enterprise System Suitability - 667003976: Calculates all System Suitability parameters described in the different Pharmacopoeia USP, EP and JP. Performs statistical calculations on results as repeatability and summarizes the information in graphical or tabular formats. Allows you to specify the control limits or warning limits to flag out of specifications (OOS) values. Develop custom reports with trend plots and statistics, summary graphics to highloght OOS values.

APCI Probe Assembly - 700000290

APCI Probe Assembly - 700000290: An atmospheric pressure chemical ionization(APCI) probe introduces the sample to the ion source. The original part number was 725000214. The part number has been changed to p/n 700000290.

APCI IonSABRE Probe Assembly - M956079DC1-S

APCI IonSABRE Probe Assembly - M956079DC1-S: The probe is available as a replacement spare for the instruments listed in the Specifications section and is also suitable for the initial purchase of the IonSabre capability for Quattro Ultima PT instruments only. All other instruments require an additional power supply, which is included in the IonSabre accessory upgrade products.

PFC Analysis Kit - 176001744

PFC Analysis Kit - 176001744: Waters ACQUITY UPLC total solution for the analysis of Perfluorinated Compounds (PFCs). The kit contains ACQUITY BEH C18 column, PFC isolator column, and other PFCs-free components optimized for use with the ACQUITY system. Sample preparation consumables such as Oasis HLB cartridges, PFC calibration standards, PFC unknown QC standards, and sample vials are also included.

Glycoworks RapiFluor-MS N-Glycan Starter Kit-96 sample - 176003635

Glycoworks RapiFluor-MS N-Glycan Starter Kit-96 sample - 176003635: Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in as little as 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS's (RFMS) unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive. This starter kit includes the GlycoWorks Deglycosylation Module, GlycoWorks Labeling Module, GlycoWorks Clean-up Module, GlycoWorks Sample Collection Module, as well as the ACQUITY UPLC Glycan BEH Amide, 1.7 ìm, 2.1 x 150 Column and Mobile-Phase Concentrate: Ammonium Formate. It contains materials to process 96 samples in a 4x24 format. The kit contains: GlycoWorks Deglycosylation Module: (4) 0.035 ml/vial Rapid PNGaseF Enzyme (4) 0.25 ml/vial Glycoworks Rapid Buffer (1) 4 vials of 10 mg/vial RapiGest SF Surfactant (1) Intact mAb Mass Check Standard *Shipped in a separate box GlycoWorks RapiFluor-MS Labeling Module: (4) 23 mg/vial RapiFluor-MS Reagent (4) 1 ml/vial Reagent Solvent (Anhydrous DMF) GlycoWorks RFMS Clean-up Module: (4) 0.5 ml/vial Elution Buffer (200mM Ammonium Acetate 95/5 Water/ACN pH 7) (4) 3 ml/vial Sample Diluent (DMF/ACN Mixture) (1) GlycoWorks HILIC µElution Plate GlycoWorks Sample Collection Module: (15) 1 mL tubes for deglycosylation and labeling reaction (15) 600 ìL tube inserts for SPE eluate collection (15) Cap strips with slits for direct injection (1) 1 mL round collection tray (1) Waste tray In Addition To: (1) 5050 mM Ammonium Formate Solution—Glycan Analysis (186007081) (1) ACQUITY UPLC Glycan BEH Amide Column, 130A, 1.7ìm, 2.1 x 150 mm (186004742)

Atlantis HILIC OBD Prep Column, 100Å, 5 µm, 30 mm X 150 mm, 1/pk - 186003962

Atlantis HILIC OBD Prep Column, 100Å, 5 µm, 30 mm X 150 mm, 1/pk - 186003962: Atlantis HILIC Silica columns are used in combination with high organic mobile phases (>80% acetonitrile) to provide retention of analytes that are simply too polar to be retained by reverse-phase chromatography. HILIC separation mechanisms provide orthogonal analyte selectivity compared to traditional chromatographic reversed-phase approaches.

nanoACQUITY Sample Manager Performance Maintenance Kit - 201000182

nanoACQUITY Sample Manager Performance Maintenance Kit - 201000182: The Waters® Performance Maintenance Kit for the nanoACQUITY Sample Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annula basis. The Waters® Performance Maintenance Kit includes the following parts: air chassis filter, injector outlet tubes, needle, system outlet tubes, inject valve pod, wash syringe, injector syringe, sample loop and o-ring and vent valve cartridge. The nanoACQUITY Sample Manager PM kit fits into the 5000psi and 10,000psi nanoACQUITY systems.

Glycoworks RapiFluor-MS N-Glycan Kit-96 sample - 176003606

Glycoworks RapiFluor-MS N-Glycan Kit-96 sample - 176003606: Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in as little as 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS's (RFMS) unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive. This core kit includes the GlycoWorks Deglycosylation Module, GlycoWorks Labeling Module, GlycoWorks Clean-up Module, and the GlycoWorks Sample Collection Module. It contains materials to process 96 samples in a 4x24 format. The kit contains: GlycoWorks Deglycosylation Module: (4) 0.035 ml/vial Rapid PNGaseF Enzyme (4) 0.25 ml/vial Glycoworks Rapid Buffer (1) 4 vials of 10 mg/vial RapiGest SF Surfactant (1) Intact mAb Mass Check Standard *Shipped in a separate box GlycoWorks RapiFluor-MS Labeling Module: (4) 23 mg/vial RapiFluor-MS Reagent (4) 1 ml/vial Reagent Solvent (Anhydrous DMF) GlycoWorks RFMS Clean-up Module: (4) 0.5 ml/vial Elution Buffer (200mM Ammonium Acetate 95/5 Water/ACN pH 7) (4) 3 ml/vial Sample Diluent (DMF/ACN Mixture) (1) GlycoWorks HILIC µElution Plate GlycoWorks Sample Collection Module: (15) 1 mL tubes for deglycosylation and labeling reaction (15) 600 µL tube inserts for SPE eluate collection (15) Cap strips with slits for direct injection (1) 1 mL round collection tray (1) Waste tray

UPLC AAA H-Class Applications Kit - 176002983

UPLC AAA H-Class Applications Kit - 176002983: UPLC AAA H-Class Applications Kit, Includes 186000384C Total Recovery Vials with caps, 186003836 AccQ-Tag Ultra™ Derivitization Kit , 186003837 AccQ-Tag Ultra™ C18 1.7µm 2.1x100mm Column, 186003838 AccQ-Tag Ultra™ Eluent A 1 Liter Bottle, 186003839 AccQ-Tag Ultra™ Eluent B 1 Liter Bottle, 430001783 Assy, Tube Inlet .0025 ID PEEK Nut PDA, 205000343 Column in-line filter kit, 716003230 Information Set, UPLC AAA H-Class Solution

Viridis BEH OBD Prep Column, 130Å, 5 µm, 30 mm X 100 mm, 1/pk - 186005737

Viridis BEH OBD Prep Column, 130Å, 5 µm, 30 mm X 100 mm, 1/pk - 186005737: Designed and tested for SFC, the Viridis 5 µm columns demonstrate a wide range of selectivity for greater resolution. The reduction and control of surface silanol activity on Viridis Hybrid particles delivers, under SFC conditions, excellent peak shapes — without the use of mobile-phase additives — even for well-retained basic achiral compounds.

XBridge BEH C18 OBD Prep Column, 130Å, 5 µm, 30 mm X 100 mm, 1/pk - 186002982

XBridge BEH C18 OBD Prep Column, 130Å, 5 µm, 30 mm X 100 mm, 1/pk - 186002982: As a workhorse for HPLC method development, XBridge BEH C18 sorbent can be used over an entire range of mobile phase pH (1-12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed.

ESI Probe Assembly - 700000289

ESI Probe Assembly - 700000289: Replacement ElectroSpray Probe Assembly. Also includes Spares Kit 700000336.

Flowcell, ACQUITY PDA, 5 mm, SS - 205000612

Flowcell, ACQUITY PDA, 5 mm, SS - 205000612: ACQUITY PDA 5mm SS Flow cell

Flowcell, ACQUITY TUV, 5 mm, SS - 205000610

Flowcell, ACQUITY TUV, 5 mm, SS - 205000610: This new stainless steel flowcell will fit into existing ACQUITY TUV Detectors with serial number K05UPT700N and above. The fluidic connections will be the same as for the existing flowcells. The new flowcell has a robust design and has a decreased pathlength of 5mm.

Flowcell, ACQUITY PDA, 5 mm, Titanium - 205000613

Flowcell, ACQUITY PDA, 5 mm, Titanium - 205000613: ACQUITY PDA 5mm Titanium (Bio) Flow cell

Flowcell, ACQUITY UPLC PDA, Analytical, with ID - 205015017

Flowcell, ACQUITY UPLC PDA, Analytical, with ID - 205015017: The ACQUITY UPLC Analytical Flowcell with Intelligent Chip Technology can be used in older detectors but the chip technology feature will not work with those older modules. Newer ACQUITY PDA models with serial number E10UPD761N or E10UPD761A or newer ACQUITY eLambda PDA Models with serial number F10UPD571N or F10UPD571A will have the chip technology feature working in the detectors. THis is the analytical flow cell for the ACQUITY PDA detector.

Flowcell, ACQUITY UPLC TUV, Analytical, with ID - 205015016

Flowcell, ACQUITY UPLC TUV, Analytical, with ID - 205015016: The ACQUITY UPLC Analytical Flowcell with Intelligent Chip Technology can be used in older detectors but the chip technology feature will not work with those older modules. Newer ACQUITY TUV models with serial number A10TUV001N or A10TUV001A will have the chip technology feature working in the detectors. This is the standard analytical flow cell in the ACQUITY TUV detectors.

Flowcell, ACQUITY PDA, HT, 3 mm - 205015006

Flowcell, ACQUITY PDA, HT, 3 mm - 205015006: The High Throughput Flow Cell has a 3mm path length and is used on the ACQUITY UPLC PDA Detector and the ACQUITY UPLC eLambda PDA detector.

PerformancePLUS Degasser w/o GPV - 700001220

PerformancePLUS Degasser w/o GPV - 700001220: The PerformancePLUS Degasser is designed to function with the 2790/2795 Alliance HT. The function of the degasser is to remove sufficient dissolved gasses from mobile phase fluids to prevent outgassing and/or bubble formation inside critical solvents or system components. Improperly degassed solvent could prevent the system from delivering the mobile phase fluid in a consistent and reliable manner.

XSelect CSH C18 OBD Prep Column, 130Å, 5 µm, 30 mm X 75 mm, 1/pk - 186005424

XSelect CSH C18 OBD Prep Column, 130Å, 5 µm, 30 mm X 75 mm, 1/pk - 186005424: XSelect CSH C18 columns can be used as general purpose columns that provide alternative selectivity compared to other C18 sorbents. Charged Surface Hybrid (CSH) technology helps you overcome column related problems such as peak shape asymmetry and poor loading for basic compounds, column bleed, and slow mobile-phase re-equilibration.

Flow Splitter, 8.0-30mL, 1000:1 - 205000437

Flow Splitter, 8.0-30mL, 1000:1 - 205000437: Flow Splitters are necessary for fraction collection in purification They help to achieve optimum flow rates for detector efficiency, even when destructive detectors such as evaporative light scattering or mass spectrometers are used.