Product Listing:  Needle Seat - 405011492 to Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020840

Needle Seat - 405011492
SKU: 405011492
Needle Seat - 405011492
List Price
$200.00
Category: Service Parts & Kits
Needle Seat - 405011492: Replacement needle seat. The needle seat is a spare part used on ACQUITY Sample Managers with Flow Through Needle (FTN) configurations. It is applicable to both the standard and Bio configurations. This part number replaced 405008397.
Part Number: 405011492
Brand: Waters Quality Parts
Replacement Schedule Annual
System UPLC
Type Seal
Units per Package 1 pk
15Kpsi Pump Head - 700002595
SKU: 700002595
15Kpsi Pump Head - 700002595
List Price
$205.00
Category: Service Parts & Kits
15Kpsi Pump Head - 700002595: Replacement Stainless Steel Pump Head. Used on ACQUITY Binary, Isocratic and Quaternary Solvent Managers. Also used on NanoACQUITY Solvent Managers.
Part Number: 700002595
Brand: Waters Quality Parts
Material Stainless Steel
Replacement Schedule As Required
System UPLC
Type Pump Head
Units per Package 1 pk
HIC Protein Standard Mix - 186007953
SKU: 186007953
HIC Protein Standard Mix - 186007953
List Price
$200.00
Category: Standards & Reagents
HIC Protein Standard Mix - 186007953: The HIC Protein Standard Mix is used to benchmark HIC columns, especially the Waters Protein-Pak Hi Res HIC Columns. It is recommended that this standard be used on a regular basis for evaluation of column and system performance ensuring confidence in results. It is also very valuable for method development and troubleshooting. This standard is uniquely formulated and optimized with a 6-component intact protein mixture to span a typical chromotographic range in this application. It contains 0.05 mg Ribonuclease A, 0.025 mg Cytochrome C, 0.05 mg Myoglobin, 0.03 mg Lysozyme, 0.1 mg Yeast Enolase and 0.05 mg of alpha-cymotrypsinogen A. It is packaged in a Waters TruView vial (ideal for peptides) as a lyophilized solid. Recommended solubilization is in 100 µl of distilled, purified Water or 50/50 mix of Mobile Phase A and B (low salt, pH 6.9). Store at -20 °C immediately upon arrival.
Part Number: 186007953
Application Protein
Detection Method UV
Formulation Solid
Product Type Standards
Separation Mode Reversed Phase
Shelf Life 24 Months
Shelf life upon reconstitution 1 Week
Shipping Ambient
Storage -20 C (Freezer)
System Type LC
Type Reference
Units per Package 1 pk
Oasis PRiME HLB 6 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 30/pk - 186008057
SKU: 186008057
Oasis PRiME HLB 6 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 30/pk - 186008057
List Price
$196.00
Category: Sample Preparation & Filtration
Oasis PRiME HLB 6 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 30/pk - 186008057: Oasis PRiME HLB sets the new performance standard for solid phase extraction cleanup in routine analysis. This sorbent will provide reversed-phase cleanup of acidic, basic and neutral compounds form complex sample matrices. Oasis PRiME HLB has been designed to simplify SPE with easy to follow protocols. It also produces cleaner samples by removing greater than 95% of common matrix interferences such as salts, proteins and phospholipids. Additionally, viscous samples can be processed with faster flows through the device and and less plugging. Based on the Oasis HLB sorbent technology, this water-wettable sorbent does not require conditioning and equilibration to provide excellent recoveries.
Part Number: 186008057
Brand: Oasis
Barrel Size 6 cc
Chemistry PRiME HLB
Endcapped No
Format Vac Cartridge
Mass Spec Compatibility Yes
Material Polypropylene
Mode Reversed-phase
Sorbent Weight 200 mg
Units per Package 30 pk
Water Wettable Yes
pH Range Max 12 pH
pH Range Min 1 pH
I-Class SM-FTN Seat Port Assembly, 0.003ID - 700006056
SKU: 700006056
I-Class SM-FTN Seat Port Assembly, 0.003ID - 700006056
List Price
$200.00
Category: Service Parts & Kits
I-Class SM-FTN Seat Port Assembly, 0.003ID - 700006056: ACQUITY I-Class SM-FTN Seal Extension Tube, .003ID
Part Number: 700006056
Brand: Waters Quality Parts
Material Stainless Steel
Replacement Schedule As Required
System UPLC
Type Tubing
Units per Package 1 pk
Tube Assembly, Preheater to Column, SS - 700005533
SKU: 700005533
Tube Assembly, Preheater to Column, SS - 700005533
List Price
$200.00
Category: Service Parts & Kits
Tube Assembly, Preheater to Column, SS - 700005533: ACQUITY UPC2 Preheater to Column Tube Assembly, SS
Part Number: 700005533
Brand: Waters Quality Parts
Replacement Schedule As Required
Units per Package 1 pk
PIC Reagent B8 - WAT085142
SKU: WAT085142
PIC Reagent B8 - WAT085142
List Price
$198.00
Category: Standards & Reagents
PIC Reagent B8 - WAT085142: Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC B8 is a 5 vials/pkg workable solution in UV range in mobile phase of 240+ nm.
Part Number: WAT085142
Detection Method UV
Formulation Liquid
Product Type Reagents
Separation Mode Reversed Phase
Shipping Ambient
Storage Room Temperature
System Type LC
Type Reagent
Units per Package 5 pk
Volume 15 mL
Needle Assembly, PEEKsil, 15 µL - 700002708
SKU: 700002708
Needle Assembly, PEEKsil, 15 µL - 700002708
List Price
$190.00
Category: Service Parts & Kits
Needle Assembly, PEEKsil, 15 µL - 700002708: Replacement 15µL PEEKSil sample needle. Utilised in the nanoACQUITY Sample Manager
Part Number: 700002708
Brand: Waters Quality Parts
Replacement Schedule Annual
System UPLC
Type Needle
Units per Package 1 pk
Check Valve, Double Ball & Seat - 700005164
SKU: 700005164
Check Valve, Double Ball & Seat - 700005164
List Price
$185.00
Category: Service Parts & Kits
Check Valve, Double Ball & Seat - 700005164: Replacement Double Ball & Seat Check Valve. This part number provides a single check valve intended for use in an ACQUITY Quaternary Solvent Manager. The same check valve can be purchased via 700002968, which provides a 2/pk which would be the correct quantity for an ACQUITY Binary Solvent Manager.
Part Number: 700005164
Brand: Waters Quality Parts
Replacement Schedule Annual
System UPC2, UPLC
Type Valve - Check
Units per Package 1 pk
Pin Plug, 1/16 in, High Pressure, 5/pk - 700002747
SKU: 700002747
Pin Plug, 1/16 in, High Pressure, 5/pk - 700002747
List Price
$195.00
Category: Service Parts & Kits
Pin Plug, 1/16 in, High Pressure, 5/pk - 700002747: The pin plug is required in port 6 of the Trap Valve pod assembly in the following configurations for the nanoACQUITY: Direct Injection, Single Pump Trapping, Vented Dual Pump Trapping, , and 2D with Dilution. To see the Fluidic Configurations for the nanoACQUITY UPLC, go to the Url Link below, under Systems select nanoACQUITY, click on the Waters Graphical Part Locator, and then choose Fluidic Configurations on the right side of the page. There will be the six different configurations of the nanoACQUITY that you can click on individually to see a larger image. There will also be a parts list for that specific configuration on the right side of the page.
Part Number: 700002747
Brand: Waters Quality Parts
Replacement Schedule As Required
Units per Package 5 pk
Fitting, 1/8 in NPT Male, Female, PEEK - 700009711
SKU: 700009711
Fitting, 1/8 in NPT Male, Female, PEEK - 700009711
List Price
$190.00
Category: Service Parts & Kits
Fitting, 1/8 in NPT Male, Female, PEEK - 700009711: This spare part is a Waters Quality part
Part Number: 700009711
PM Kit No
Part Category Fittings
Product Category Detectors
Products ACQUITY QDa Detector
Replacement Schedule As Needed
Acrodisc, Syringe Filter, GHP, 25 mm, 0.45 µm, Aqueous, 50/pk - WAT200514
SKU: WAT200514
Acrodisc, Syringe Filter, GHP, 25 mm, 0.45 µm, Aqueous, 50/pk - WAT200514
List Price
$191.00
Category: Sample Preparation & Filtration
Acrodisc, Syringe Filter, GHP, 25 mm, 0.45 µm, Aqueous, 50/pk - WAT200514: GHP has the broadest chemical compatibility and exhibits minimal protein binding
Part Number: WAT200514
Brand: Acrodisc
Diameter 25 mm
Filter Type GHP
Format Syringe Filter
Hold-up Volume < 100 µL
Housing Material Polypropylene
Pore Size 0.45 µm
Product Type Filtration
Sample Volume < 100 mL
Separation Mode Aqueous
Units per Package 50 pk
One-piece Fitting, 10 - 32, 10/pk - 700004841
SKU: 700004841
One-piece Fitting, 10 - 32, 10/pk - 700004841
List Price
$185.00
Category: Service Parts & Kits
One-piece Fitting, 10 - 32, 10/pk - 700004841: The original part number was p/n 410001905 and it was changed to p/n 700004841.
Part Number: 700004841
Brand: Waters Quality Parts
Replacement Schedule As Required
System UPLC
Type Fitting
Units per Package 10 pk
Leucine Enkephalin - 186006013
SKU: 186006013
Leucine Enkephalin - 186006013
List Price
$174.00
Category: Standards & Reagents
Leucine Enkephalin - 186006013: Leucine Enkephalin is a lyophilized peptide intended to be used as a reference material for mass spectrometer tuning and calibration. Two vials of 3 mg Leucine Enkephalin are provided in this package. This product contains 2x of the following: • 3 mg ± 0.06 mg Leucine Enkephalin solid in a 12 mL Amber Screw top Vial Store frozen at - 20 ºC ± 10 °C upon arrival.
Part Number: 186006013
Detection Method MS
Formulation Solid
Mass 3 mg
Product Type Standards
Shelf Life 6 months
Shelf life upon reconstitution 1 Week
Shipping Ambient
Storage -20 C (Freezer)
System Type MS
Type Calibration
Units per Package 1 pk
QuanRecovery with MaxPeak HPS Vial Package (186009186) with pre-slit PTFE silicone cap and septum, 100/pk - 176004434
SKU: 176004434
QuanRecovery with MaxPeak HPS Vial Package (186009186) with pre-slit PTFE silicone cap and septum, 100/pk - 176004434
List Price
$175.00
Category: Vials, Containers, & Collection Plates
QuanRecovery with MaxPeak HPS Vial Package (186009186) with pre-slit PTFE silicone cap and septum, 100/pk - 176004434: Designed by LC-MS bioanalysts for LC-MS bioanalysts, QuanRecovery Vials with MaxPeak HPS reduce peptide and protein losses due to ionic interactions and non specific binding. A reduction in these losses lead to higher recovery, sensitivity and repeatability in analytical results. These 300µL vials are LC-MS autosampler ready, with low resudual volumes to fully utilize low sample volumes. MaxPeak High Performance Surfaces are new and innovative technologies designed to increase analyte recovery, sensitivity and reproducibility by minimizing analyte/surface interactions that can lead to sample losses.
Part Number: 176004434
Brand: QuanRecovery

Designed by LC-MS bioanalysts for LC-MS bioanalysts, QuanRecovery Vials with MaxPeak HPS reduce peptide and protein losses due to ionic interactions and non specific binding. A reduction in these losses lead to higher recovery, sensitivity and repeatability in analytical results. These 300µL vials are LC-MS autosampler ready, with low resudual volumes to fully utilize low sample volumes. MaxPeak High Performance Surfaces are new and innovative technologies designed to increase analyte recovery, sensitivity and reproducibility by minimizing analyte/surface interactions that can lead to sample losses.
Sep-Pak C8 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37 - 55 µm, 100/pk - WAT036785
SKU: WAT036785
Sep-Pak C8 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37 - 55 µm, 100/pk - WAT036785
List Price
$185.00
Category: Sample Preparation & Filtration
Sep-Pak C8 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37 - 55 µm, 100/pk - WAT036785: Silica-based bonded phase with moderate hydrophobicity; use for methods requiring less retention than C18; typical applications include drugs and their metabolites in serum, plasma or urine, peptides in serum, plasma.
Part Number: WAT036785
Brand: Sep-Pak
Barrel Size 1 cc
Chemistry C8
Endcapped Yes
Format Vac Cartridge
Hold up volume 0.25 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units per Package 100 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
Wash Tube Seal Replacement Kit, 4/pk - WAT270940
SKU: WAT270940
Wash Tube Seal Replacement Kit, 4/pk - WAT270940
List Price
$180.00
Category: Service Parts & Kits
Wash Tube Seal Replacement Kit, 4/pk - WAT270940: These wash tube seals are integral to the solvent management system of your 2695 Separations Modules. As part of the seal wash system, they help ensure that plunger seal life is maximized. Kit contains four seals to cover both Pump Heads.
Part Number: WAT270940
Brand: Waters Quality Parts
Replacement Schedule As Required
System HPLC
Type Seal
Units per Package 4 pk
PITC Reagent - WAT088120
SKU: WAT088120
PITC Reagent - WAT088120
List Price
$180.00
Category: Standards & Reagents
PITC Reagent - WAT088120: Precolumn derivatization reagent phenylisothiocyanate (PITC) used in Waters PicoTag Method for amino acid analysis.
Part Number: WAT088120
Application Amino Acid Analysis
Detection Method UV
Formulation Solid
Product Type Reagents
Separation Mode Reversed Phase
Shipping Ambient
Storage Room Temperature
System Type LC
Type Reagent
Units per Package 10 pk
Volume 1 mL
Assembly, Extension Loop, 50 µL - 430002012
SKU: 430002012
Assembly, Extension Loop, 50 µL - 430002012
List Price
$160.00
Category: Service Parts & Kits
Assembly, Extension Loop, 50 µL - 430002012: This is a 50µL Sample loop used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sample Manager-FTN modules.
Part Number: 430002012
Brand: Waters Quality Parts
Material Stainless Steel
Replacement Schedule As Required
System UPLC
Type Loop
Units per Package 1 pk
Volume 50 μL
Face Seals Replacement Kit 4/pk - WAT270939
SKU: WAT270939
Face Seals Replacement Kit 4/pk - WAT270939
List Price
$180.00
Category: Service Parts & Kits
Face Seals Replacement Kit 4/pk - WAT270939: Kit contains four Face Seals to allow replacement of Face Seals on both pump heads in the Alliance 2695.
Part Number: WAT270939
Brand: Waters Quality Parts
Replacement Schedule Annual
System HPLC
Type Seal
Units per Package 4 pk
Clear Glass 12 x 32 mm Screw Neck Total Recovery Vial, with Cap and PTFE Septum, 1 mL Volume, 100/pk - 186007197C
SKU: 186007197C
Clear Glass 12 x 32 mm Screw Neck Total Recovery Vial, with Cap and PTFE Septum, 1 mL Volume, 100/pk - 186007197C
List Price
$179.00
Category: Vials, Containers, & Collection Plates
Clear Glass 12 x 32 mm Screw Neck Total Recovery Vial, with Cap and PTFE Septum, 1 mL Volume, 100/pk - 186007197C: Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry. This product combination pack has a PTFE septum for normal phase solvents and does not reseal after puncture.
Part Number: 186007197C
Application Sample Preparation
Closure Type Screw Neck
Dimensions 12 x 32 mm
Format Total Recovery Vial
Includes Vial, Cap, & Septum
Material Clear Glass
Product Type Vials
Seal Material PTFE
Type Autosampler vial
Units per Package 100 pk
Vials Sample Limited Sample Limited
Volume Capacity 1 mL
Sep-Pak Accell Plus CM 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020855
SKU: WAT020855
Sep-Pak Accell Plus CM 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020855
List Price
$180.00
Category: Sample Preparation & Filtration
Sep-Pak Accell Plus CM 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37 - 55 µm, 50/pk - WAT020855: Sep-Pak Accell Plus CM Vac cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
Part Number: WAT020855
Brand: Sep-Pak
Barrel Size 3 cc
Chemistry Accell Plus CM
Format Vac Cartridge
Hold up volume 1.1 mL
Ion Exchange Capacity 370 µeq/gram
Mass Spec Compatibility Yes
Mode Ion-Exchange
Particle Size 37-55 µm
Pore Size 300 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 50 pk
Water Wettable Yes
pH Range Max 8 pH
pH Range Min 2 pH
Sep-pak C18 3cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036945
SKU: WAT036945
Sep-pak C18 3cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036945
List Price
$175.00
Category: Sample Preparation & Filtration
Sep-pak C18 3cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT036945: Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.
Part Number: WAT036945
Brand: Sep-Pak
Barrel Size 3 cc
Chemistry C18
Endcapped Yes
Format Vac RC Cartridge
Hold up volume 0.8 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH
RCM 8 X 10 Extension Kit - WAT038846
SKU: WAT038846
RCM 8 X 10 Extension Kit - WAT038846
List Price
$175.00
Category: Service Parts & Kits
Buy RCM 8 X 10 Extension Kit - WAT038846 from Waters
Part Number: WAT038846
Assembly, Extension Loop, 250 µL - 430002007
SKU: 430002007
Assembly, Extension Loop, 250 µL - 430002007
List Price
$175.00
Category: Service Parts & Kits
Assembly, Extension Loop, 250 µL - 430002007: This is a 250µL Sample loop used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sample Manager-FTN modules.
Part Number: 430002007
Brand: Waters Quality Parts
Material Stainless Steel
Replacement Schedule As Required
System UPLC
Type Loop
Units per Package 1 pk
Volume 250 μL
Carousel Carrier, 5 Carousel Positions - WAT270945
SKU: WAT270945
Carousel Carrier, 5 Carousel Positions - WAT270945
List Price
$175.00
Category: Service Parts & Kits
Carousel Carrier, 5 Carousel Positions - WAT270945: The Carousel Carrier has 5 positions for 5 different color-coded carousels in the 2690/2695 and 2690D/2695D Separations Modules.
Part Number: WAT270945
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
Delay Coil, 8-30mL, 1000:1, 0.030 x 360 - 700003599
SKU: 700003599
Delay Coil, 8-30mL, 1000:1, 0.030 x 360 - 700003599
List Price
$175.00
Category: Service Parts & Kits
Delay Coil, 8-30mL, 1000:1, 0.030 x 360 - 700003599: The part number 430000623 was repackaged and changed to part number 700003599.
Part Number: 700003599
PM Kit No
Part Category Mechanical
Product Category Pumps
Products System Fluidics Organizer
Replacement Schedule As Needed
AccQ-Tag Method Manual - WAT052874
SKU: WAT052874
AccQ-Tag Method Manual - WAT052874
List Price
$144.00
Category: Education
AccQ-Tag Method Manual - WAT052874: Manual detailing Waters AccQ-Tag™ Precolumn derivatization method for amino acid analysis.
Part Number: WAT052874
Product Type Primers
Locating Screw - M702764AD1-S
SKU: M702764AD1-S
Locating Screw - M702764AD1-S
List Price
$170.00
Category: Service Parts & Kits
Locating Screw - M702764AD1-S: This screw is used to fit the outer source to the source focus stack in the AutoSpec series of instruments
Part Number: M702764AD1-S
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products AutoSpec Premier Mass Spectrometer
Replacement Schedule As Needed
Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020840
SKU: WAT020840
Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020840
List Price
$165.00
Category: Sample Preparation & Filtration
Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT020840: Sep-Pak Amino Propyl (NH2) Vac cartridges contain a moderately polar, silica-based bonded phase with weakly basic surface. The sorbent can be used as a polar sorbent with different selectivity for acidic/basic analytes or as a weak anion exchanges in aqueous medium below pH 8. Applications include extraction of phenols and phenolic pigments, petroleum fractionation, saccharides and drugs and metabolites. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
Part Number: WAT020840
Brand: Sep-Pak
Barrel Size 3 cc
Chemistry Aminopropyl (NH2)
Endcapped No
Format Vac Cartridge
Hold up volume 0.8 mL
Mass Spec Compatibility Yes
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125 Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units per Package 50 pk
Water Wettable No
pH Range Max 8 pH
pH Range Min 2 pH