0.5 micron Filter Insert
Part Number: 700000994
Replacement insert for the filter between the injector assembly and the column.
|
|
1.0mL Diluter Syringe Plunger
Part Number: 700002232
This spare part is a genuine Waters Quality Part
|
|
1.0mL Syringe
Part Number: WAT272617
The 1.0mL syringe is an optional syringe for the 2700 Sample Manager and the 2767/2747 of the Autopurification System.
|
|
1.5mm Allen Key, 5/pkg
Part Number: 5871028-S
This spare part is a genuine Waters Quality Part
|
|
1/16 in. Long Fingertight Fitting (3pkg)
Part Number: 700004477
This spare part is a genuine Waters Quality Part
|
|
1/16in. Rheodyne Nut
Part Number: 6060808
This spare part is a genuine Waters Quality Part
|
|
1/16in. x 0.007in PEEK Tube
Part Number: 6436004-S1
This spare part is a genuine Waters Quality Part
|
|
1/2-µm Filter Assembly
Part Number: 289002111
This 1/2µm inline filter assembly fits into the 5000psi and the 10,000 psi nanoACQUITY system.
|
|
1/2-µm Filter Insert Assembly
Part Number: 700002696
This 1/2 µm filter insert assembly fits into the 5000psi and 10,000psi nanoACQUITY system.
|
|
1/4 in., GVF/4 Ferrule
Part Number: 6070119-S
This spare part is a genuine Waters Quality Part
|
|
1/4in. Ball Valve, angled
Part Number: 6062327
This spare part is a genuine Waters Quality Part
|
|
1/4in. Short Comp. Screw (Gold-plated)
Part Number: 700002634
There are 10 Gold-plated compression screws in one package.
|
|
1/4in. Slotted Wrench
Part Number: 700001015
This spare part is a genuine Waters Quality Part
|
|
1/8in. x .085in. HPLC, SS tube
Part Number: 6395995-S
This spare part is a genuine Waters Quality Part
|
|
10 mm Flow Cell Rebuild Kit
Part Number: WAS081346
The 10mm Flow Cell Rebuild Kit contains the following parts: two lens screws, one entrance lens washer, one entrance lens (curved), ten gaskets, one exit window (flat), one exit lens washer, one cuvette lens screw, one cuvette lens, and one cuvette lens h...
|
|
10 pin terminal (Female Plug)
Part Number: WAT272637
This spare part is a genuine Waters Quality Part
|
|
10-pin Terminal Plug (male)
Part Number: WAT272606
The 10-pin Terminal Plug (male) is for event connections.The first two connectors (1 and 2) connects the signal cable to the HPLC in order to provide an inject start signal. Connectors 3-6 connects signal cable to a column selection valve on the HPLC. Con...
|
|
10-port Stream Select Valve
Part Number: 700002049
The 10-port Stream Select Valve is used in the Selector Valve Assembly in the CapLC XE System.
|
|
10-port Vent Valve Stator, CapLC
Part Number: 700002053
This spare part is a genuine Waters Quality Part
|
|
1000µL Plunger, (1/pkg)
Part Number: 700002217
This spare part is a genuine Waters Quality Part
|
|
1000µL Sample Loop
Part Number: 430000843
This spare part is a genuine Waters Quality Part
|
|
1000µL Sample Loop
Part Number: 700002462
This 1000µL Sample Loop is a large volume sample loop and is standard with the Prep Option Kit.
|
|
1000µL Syringe
Part Number: 430000867
The 1000µL gastight Syringe has a fixed needle which is a gauge 22 and has pointstyle 3.
|
|
1000µL Syringe Kit
Part Number: 205000186
The 1000µL Syringe Kit for the 2777 Sample Manager consists of a 1-piece syringe adapter and a 1-piece plunger holder, with a two-piece syringe.
|
|
100µL Bio-Compatible Sample Loop
Part Number: 700000684
An optional component of the CapLC™ system, the 100µL PEEK sample loop holds the sample in place before injection. Packed in a clean environment, the sample loop helps minimize sample contamination. It is also used on the 2707 Autosampler.
|
|
