Flow Cell

  Product    
info

WAS081346 - 10 mm Flow Cell Rebuild Kit

Part Number: WAS081346

The 10mm Flow Cell Rebuild Kit contains the following parts: two lens screws, one entrance lens washer, one entrance lens (curved), ten gaskets, one exit window (flat), one exit lens washer, one cuvette lens screw, one cuvette lens, and one cuvette lens holder.

WAS081346 - 10 mm Flow Cell Rebuild Kit
Part Number: WAS081346
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector
Replacement Schedule As Needed

info

700001618 - 2475 Flow Cell Assembly Holder

Part Number: 700001618

The Flow Cell Holder contains the flow cell. The Flow Cell is a quartz cell designed to maximize the fluorescence signal.and to minimize the amount of stray light that could affect the signal measurement.

700001618 - 2475 Flow Cell Assembly Holder
Part Number: 700001618
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2475 Multi-channel Fluorescence Detector
Replacement Schedule As Needed

info

700001786 - Flow Cell Assembly with Manifold

Part Number: 700001786

The flow cells in the 2488 are positioned in two banks, starting on the upper left channels 1-4.The lower bank contains channels 5-8. The flow cell inlet is in the lower row of the bank and the flow cell outlet is in the upper row of the bank.

700001786 - Flow Cell Assembly with Manifold
Part Number: 700001786
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2488 Multichannel UV/Vis Detector
Replacement Schedule As Needed

info

700001787 - Flow Cell Module Assembly

Part Number: 700001787

The flow cells used in the 2488 multichannel flow cell assembly render the the detector baseline insensitive to changes in mobile phase refractive index. The flow cells have a 4mm path length and are designed as a cartridge assembly.

700001787 - Flow Cell Module Assembly
Part Number: 700001787
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2488 Multichannel UV/Vis Detector
Replacement Schedule As Needed

info

205000399 - 2998 Analytical Flow Cell Kit

Part Number: 205000399

This spare part is a Waters Quality part.

205000399 - 2998 Analytical Flow Cell Kit
Part Number: 205000399
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2998 Photodiode Array Detector
Replacement Schedule As Needed

info

205000400 - 2998 Microbore Flow Cell Kit

Part Number: 205000400

This spare part is a Waters Quality part.

205000400 - 2998 Microbore Flow Cell Kit
Part Number: 205000400
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2998 Photodiode Array Detector
Replacement Schedule As Needed

info

205000401 - 2998 Semi-Preparative Flow Cell Kit

Part Number: 205000401

This spare part is a Waters Quality part.

205000401 - 2998 Semi-Preparative Flow Cell Kit
Part Number: 205000401
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2998 Photodiode Array Detector
Replacement Schedule As Needed

info

205000402 - 2998 Autopurification. Flow Cell

Part Number: 205000402

This spare part is a Waters Quality part.

205000402 - 2998 Autopurification. Flow Cell
Part Number: 205000402
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2998 Photodiode Array Detector
Replacement Schedule As Needed

info

205004100 - Flow Cell Kit, 0.7mm GC WE, Salt Bridge

Part Number: 205004100

The Flow Cell kit for the 0.7mm Glassy Carbon Working Electrode contains the following: (1) Micro Flow Cell 0.7mm Glassy Carbon Working Electrode. (4) Flow cell finger tight fittings, (2) 120µm spacers, (2) 25µm spacers, (4) 50µm spacers, (1) polishing disk for the working electrode, 10mL 1µm Diamond Slurry, (1) Salt Bridge Reference electrode, 50mL KCl solution, (1) Hex Key, (1) Capillary Connections Kit, (1) Polishing disk for the reference electrode, PEEK Inlet Tubing 0.01in. ID x 20cm, PEEK Outlet Tubing 0.02in. ID x 1m, (1) MSDS for the Diamond Slurry solution, and (1) MSDS for the KCl Solution.

205004100 - Flow Cell Kit, 0.7mm GC WE, Salt Bridge
Part Number: 205004100
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2465 Electrochemical Detector
Replacement Schedule As Needed

info

205004115 - Flow Cell Kit, 2mm GC WE, Salt Bridge

Part Number: 205004115

The Flow Cell kit for the 2mm Glassy Carbon Working Electrode contains the following: (1) Flow Cell 2mm Glassy Carbon Working Electrode. (4) Flow cell finger tight fittings, (2) 120µm spacers, (2) 25µm spacers, (4) 50µm spacers, (1) polishing disk for the working electrode, 10mL 1µm Diamond Slurry, (1) Salt Bridge Reference electrode, 50mL KCl solution, (1) Hex Key, (1) Polishing disk for the reference electrode, PEEK Inlet Tubing 0.01in. ID x 20cm, PEEK Outlet Tubing 0.02in. ID x 1m, (1) MSDS for the Diamond Slurry solution, and (1) MSDS for the KCl Solution.

205004115 - Flow Cell Kit, 2mm GC WE, Salt Bridge
Part Number: 205004115
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2465 Electrochemical Detector
Replacement Schedule As Needed

info

205004215 - Flow Cell Kit, 2mm GC WE, ISAAC Ref.

Part Number: 205004215

The Flow Cell kit for the 2mm Glassy Carbon Working Electrode contains the following: (1) Flow Cell 2mm Glassy Carbon Working Electrode. (4) Flow cell finger tight fittings, (2) 120µm spacers, (2) 25µm spacers, (4) 50µm spacers, (1) polishing disk for the working electrode, 10mL 1µm Diamond Slurry, (1) ISAAC Reference electrode, 10mL ISAAC solution, (1) Hex Key, (1) Polishing disk for the reference electrode, PEEK Inlet Tubing 0.01in. ID x 20cm, PEEK Outlet Tubing 0.02in. ID x 1m, (1) MSDS for the Diamond Slurry solution, and (1) MSDS for the ISAAC Solution.

205004215 - Flow Cell Kit, 2mm GC WE, ISAAC Ref.
Part Number: 205004215
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2465 Electrochemical Detector
Replacement Schedule As Needed

info

205004220 - Flow Cell Kit, 3mm Pt WE, ISAAC Ref.

Part Number: 205004220

The Flow Cell kit for the 3mm Platinum Working Electrode contains the following: (1) Flow Cell 3mm Platinum Working Electrode. (4) Flow cell finger tight fittings, (2) 120µm spacers, (2) 25µm spacers, (4) 50µm spacers, (1) polishing disk for the working electrode, 10mL 1µm Diamond Slurry, (1) ISAAC Reference electrode, 10mL ISAAC solution, (1) Hex Key, (1) Polishing disk for the reference electrode, PEEK Inlet Tubing 0.01in. ID x 20cm, PEEK Outlet Tubing 0.02in. ID x 1m, (1) MSDS for the Diamond Slurry solution, and (1) MSDS for the ISAAC Solution.

205004220 - Flow Cell Kit, 3mm Pt WE, ISAAC Ref.
Part Number: 205004220
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2465 Electrochemical Detector
Replacement Schedule As Needed

info

205004325 - Flow Cell Kit, 3mm AU WE, HyREF

Part Number: 205004325

The Flow Cell kit for the 3mm Gold Working Electrode contains the following: (1) Flow Cell 3mm Gold Working Electrode. (4) Flow cell finger tight fittings, (2) 120µm spacers, (2) 25µm spacers, (4) 50µm spacers, (1) polishing disk for the working electrode, 10mL 1µm Diamond Slurry, (1) Hex Key, (1) Polishing disk for the reference electrode, PEEK Inlet Tubing 0.01in. ID x 20cm, PEEK Outlet Tubing 0.02in. ID x 1m, and (1) MSDS for the Diamond Slurry solution.

205004325 - Flow Cell Kit, 3mm AU WE, HyREF
Part Number: 205004325
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2465 Electrochemical Detector
Replacement Schedule As Needed

info

205004330 - Flow Cell Kit, 3mm Ag WE. HyREF

Part Number: 205004330

The Flow Cell kit for the 2mm Silver Working Electrode contains the following: (1) Flow Cell 2mm Silver Working Electrode. (4) Flow cell finger tight fittings, (2) 120µm spacers, (2) 25µm spacers, (4) 50µm spacers, (1) polishing disk for the working electrode, 10mL 1µm Diamond Slurry, (1) Hex Key, (1) Polishing disk for the reference electrode, PEEK Inlet Tubing 0.01in. ID x 20cm, PEEK Outlet Tubing 0.02in. ID x 1m, and (1) MSDS for the Diamond Slurry solution.

205004330 - Flow Cell Kit, 3mm Ag WE. HyREF
Part Number: 205004330
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2465 Electrochemical Detector
Replacement Schedule As Needed

info

205004335 - Flow Cell, 3mm Copper, WE/Hy-REF

Part Number: 205004335

This spare part is a Waters Quality part.

205004335 - Flow Cell, 3mm Copper, WE/Hy-REF
Part Number: 205004335
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2465 Electrochemical Detector
Replacement Schedule As Needed

info

205004340 - Flow Cell, 3mm Glassy Carbon, WE/Hy-REF

Part Number: 205004340

This spare part is a Waters Quality part.

205004340 - Flow Cell, 3mm Glassy Carbon, WE/Hy-REF
Part Number: 205004340
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2465 Electrochemical Detector
Replacement Schedule As Needed

info

205015002 - Flow Cell, Std, ACQUITY PDA

Part Number: 205015002

The Standard Flowcell is used for the ACQUITY UPLC 2996 Detectors with Serial Numbers through K05UPD699N.

205015002 - Flow Cell, Std, ACQUITY PDA
Part Number: 205015002
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category ACQUITY
Products ACQUITY UPLC 2996 PDA Detector
Replacement Schedule As Needed

info

205015013 - ACQUITY TUV Flow Cell, 10nL, nano

Part Number: 205015013

The new Intelligent Chip Technology feature will be added to this flowcell soon. This flowcell will be backwards compatible, but the chip technology information is not available for older ACQUITY TUV detectors. New ACQUITY TUV detectors with serial number A10TUV001N or A10TUV001A and higher will have the intelligent chip technology available.

205015013 - ACQUITY TUV Flow Cell, 10nL, nano
Part Number: 205015013
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category ACQUITY
nanoACQUITY
Products ACQUITY UPLC TUV Detector
nanoACQUITY UPLC TUV Detector
Replacement Schedule As Needed

info

WAS081140 - Analytical Flow Cell

Part Number: WAS081140

The Waters®TaperSlit™ Flow Cell design used in the 2487/2489 detectors renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® Analytical TaperSlit™ FlowCell, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The analytical cell has a 10mm path length and a cell volume of 10µL.

WAS081140 - Analytical Flow Cell
Part Number: WAS081140
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector

info

WAS081347 - 3mm Flow Cell Rebuild Kit

Part Number: WAS081347

The 3mm Flow Cell Rebuild Kit contains (1) entrance lens screw, (1) entrance lens holder, (1) entrance lens (curved), (10) gaskets, (1) exit window (flat), (1) exit window holder, (1) exit window screw, (1) cuvette lens screw, (1) cuvette lens, and (1) split ring (cuvette lens holder).

WAS081347 - 3mm Flow Cell Rebuild Kit
Part Number: WAS081347
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector