Calibration Products

Also showing Calibration Column

  Product    
info

600000267 - GPC Calibration 190K Standard

Part Number: 600000267

An individual GPC standard (Gel Permeation Chromatography) For molecular weight determination. Polystyrene Standard at 190,000 Da, 100 mg, (sample diluted with 100mL solvent yields 1mg/mL) 100mg of 190K polystyrene standard

600000267 - GPC Calibration 190K Standard
Part Number: 600000267
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Chemical and Environmental Analysis Standards > GPC & GFC Standards
Applications Chemical
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System HPLC -UV

info

186006841 - 2-AB Dextran Calibration Ladder

Part Number: 186006841

In order to take full advantage of the BEH glycan column, Waters created the 2-aminobenzamide labeled 2-AB Dextran Calibration Ladder Standard to assist glycan profiling. Glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the 2AB-labeled dextran ladder and assigned with glucose unit (GU) values. Waters 2-AB labeled Dextran Calibration Ladder is different than the existing commercial offerings. The average molecular weight of the glucose homopolymer is higher (~4,500 Dalton), therefore, the workable GU value range is twice as much as the other dextran ladder standards; the observed GU goes from 2 to 30. This feature improves the large glycan retention time assignment.

186006841 - 2-AB Dextran Calibration Ladder
Part Number: 186006841
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Packaging 1/pkg
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System LC/MS

info

700005471 - XEVO TQ-S Calibration and Resolution Standards

Part Number: 700005471

Mass Spectrometry (Xevo TQ-S) standard for system assessment. 2 Components: 1. 1 x 30mL Calibration Solution: Ortho-Phosphoric Acid 0.1% Acetonitrle/Water (1:1 V/V) in Clear Nalgene Bottle 2. 1 x 30mL Intellistart Resolution Solution X20: Sodium Iodide 2 µg/ul , Cesium Iodide50 ng/ul, Methyl Sulfate Sodium Salt 20 ng/µl in IPA/Water (1:1 V/V) in Clear Nalgene Bottle Certificate of Analysis

700005471 - XEVO TQ-S Calibration and Resolution Standards
Part Number: 700005471
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid
Storage Room temp
System LC/MS

info

186007539 - ACQUITY APC Polystyrene Low MW Calibration Kit

Part Number: 186007539

APC™ Calibration Standards were specifically designed to match the molecular weight range of the ACQUITY APC™ XT Columns. They eliminate the need to manually prepare custom standard calibration mixes as ACQUITY APC Calibration Standards provide the right number of data points for the targeted MW range. Contains: -Ten clear vials with green cap; containing 1.5 mg each of polystyrene at Mp 15.7K, 4.92K, 1.25K -Ten clear vials with dark blue cap containing 1.5 mg each of polystyrene at Mp 9.13K, 3.47K, 0.474K -Ten clear vials with black cap containing 1.5 mg each of polystyrene at Mp 6.54K, 2.28K, 0.266K

186007539 - ACQUITY APC Polystyrene Low MW Calibration Kit
Part Number: 186007539
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Chemical
Packaging Kit
Product Type Kit
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C

info

186007546 - ACQUITY APC Polymethylmethacrylate Method Development MW Calibration Kit

Part Number: 186007546

APC™ Calibration Standards were specifically designed to match the molecular weight range of the ACQUITY APC™ XT Columns. They eliminate the need to manually prepare custom standard calibration mixes as ACQUITY APC Calibration Standards provide the right number of data points for the targeted MW range. Contains: -Three amber vials with yellow cap containing 0.75 mg each of PMMA at Mp 1600K, and 1.5mg PMMA at Mp 201K, 23.5K, 2.38K -Three amber vials with purple cap containing 1.5 mg each of PMMA at Mp 608K, 88.5K, 12.6K, 0.602K -Three amber vials with pink cap containing 1.5 mg each of PMMA at Mp 340K, 41.4K, 6.37K, 0.202K -Three amber vials with light blue cap containing 1.5 mg each of PMMA Mp 108K, 23.5K, 4.23K, 0.602K -Three amber vials with red caps containing 1.5 mg each of PMMA at Mp 201K, 41.4K, 6.37K, 1.102K -Three amber vials with white cap containing 1.5 mg each of PMMA at Mp 71.8K, 12.6K, 2.38K, 0.202K -Three amber vials with green cap; containing 1.5 mg each of PMMA at Mp 12.6K, 4.23K, 1.102K -Three amber vials with dark blue cap containing 1.5 mg each of PMMA at Mp 9.68K, 3.21K, 0.602K -Three amber vials with black cap containing 1.5 mg each of PMMA at Mp 6.37K, 2.38K, 0.202K -Three vials with 1.5 mg BHT

186007546 - ACQUITY APC Polymethylmethacrylate Method Development MW Calibration Kit
Part Number: 186007546
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Chemical
Packaging Kit
Product Type Kit
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C

info

186007980 - Big-4 Calibration Stock Standard

Part Number: 186007980

The Big-4 Calibration Stock Standard is a 125 ml solution of four artificial sweeteners and preservatives (caffeine, benzoate, sorbate and acesulfame potassium, each at 1,000 mg/L in an acetate buffer reagent with 5% ethanol). The standard is composed of analytes that are traceable via the current lots of the USP reference standards to the SI units and meets ISO Guide 31 on reference materials. The Big-4 Calibration Stock Standard can be used for QC methods that use HPLC, UPLC or UHPLC. A copy of the Certificate of Analysis will be included with each shipment.

186007980 - Big-4 Calibration Stock Standard
Part Number: 186007980
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Food
Detector UV
Product Type Standard
Shipping Formulation Liquid
Storage Room temp
System UPLC

info

186007982 - RapiFluor-MS Dextran Calibration Ladder

Part Number: 186007982

The RapiFluor-MS™ Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS™-labeled dextran ladder and assigned with glucose unit (GU) values. This calibration ladder provides good peak shape and reliable identification from 2 to 30 Glucose Units, which is twice as much as the other dextran ladder standards. This feature improves the large glycan retention time assignment.

186007982 - RapiFluor-MS Dextran Calibration Ladder
Part Number: 186007982
Brand: GlycoWorks

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Column Chemistry HILIC
Detector Fluorescence (FLR)
Packaging 1/pkg
Product Type Standard
Shipping Formulation Solid
Storage Frozen -20 C
System LC/MS

info

186008046 - IC Phosphate Calibration Kit 350–550mg/L

Part Number: 186008046

The IC Phosphate Calibration Kit (350-550 mg/L) consists of four individual reference standards (three calibration standards at 350, 450, 550 mg/L of phosphate and one check standard at 445 mg/L of phosphate in ultra pure deionized water), which are intended for use as calibration standards for ion chromatography to analyze phosphate/phosphoric acid levels in beverages. These standards are manufactured from potassium phosphate monohydrate and potassium sulfate. They are directly traceable to NIST Reference Standards and meet ISO Guide 31 on reference materials. A copy of the Certificate of Analysis will be included with each shipment. This kit contains the following: - 1 bottle of 350 mg/L Phosphate Calibration Standard, 125 mL - 1 bottle of 450 mg/L Phosphate Calibration Standard, 125 mL - 1 bottle of 550 mg/L Phosphate Calibration Standard, 125 mL - 1 bottle of 445 mg/L Phosphate Check Standard, 125 mL Each of the individual kit components can be purchased separately as a refill.

186008046 - IC Phosphate Calibration Kit 350–550mg/L
Part Number: 186008046
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Food
Detector UV
Product Type Standard
Shipping Formulation Liquid
Storage Room temp

info

186008047 - 350 mg/L Phosphate Calibration Standard

Part Number: 186008047

The 350 mg/L Phosphate Calibration Standard is a component of the IC Phosphate Calibration Kit (350-550 mg/L), which is intended for use as a calibration standard for ion chromatography to analyze phosphate/phosphoric acid levels in beverages. The standard consists of 350 mg/L potassium phosphate monohydrate and 10 mg/L of potassium sulfate in ultra pure deionized water. It is directly traceable to NIST Reference Standards and meets ISO Guide 31 on reference materials. A copy of the Certificate of Analysis will be included with each shipment.

186008047 - 350 mg/L Phosphate Calibration Standard
Part Number: 186008047
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Food
Detector UV
Product Type Standard
Shipping Formulation Liquid
Storage Room temp

info

186008050 - 650 mg/L Phosphate Calibration Standard

Part Number: 186008050

The 650 mg/L Phosphate Calibration Standard is a component of the IC Phosphate Calibration Kit (350-550 mg/L), which is intended for use as a calibration standard for ion chromatography to analyze phosphate/phosphoric acid levels in beverages. The standard consists of 650 mg/L potassium phosphate monohydrate and 10 mg/L of potassium sulfate in ultra pure deionized water.. It is directly traceable to NIST Reference Standards and meets ISO Guide 31 on reference materials. A copy of the Certificate of Analysis will be included with each shipment.

186008050 - 650 mg/L Phosphate Calibration Standard
Part Number: 186008050
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Food
Detector UV
Product Type Standard
Shipping Formulation Liquid
Storage Room temp

info

186008048 - 450 mg/L Phosphate Calibration Standard

Part Number: 186008048

The 450 mg/L Phosphate Calibration Standard is a component of the IC Phosphate Calibration Kit (350-550 mg/L), which is intended for use as a calibration standard for ion chromatography to analyze phosphate/phosphoric acid levels in beverages. The standard consists of 450 mg/L potassium phosphate monohydrate and 10 mg/L of potassium sulfate in ultra pure deionized water. It is directly traceable to NIST Reference Standards and meets ISO Guide 31 on reference materials. A copy of the Certificate of Analysis will be included with each shipment.

186008048 - 450 mg/L Phosphate Calibration Standard
Part Number: 186008048
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Food
Detector UV
Product Type Standard
Shipping Formulation Liquid
Storage Room temp

info

186008049 - 550 mg/L Phosphate Calibration Standard

Part Number: 186008049

The 550 mg/L Phosphate Calibration Standard is a component of the IC Phosphate Calibration Kit (350-550 mg/L), which is intended for use as a calibration standard for ion chromatography to analyze phosphate/phosphoric acid levels in beverages. The standard consists of 550 mg/L potassium phosphate monohydrate and 10 mg/L of potassium sulfate in ultra pure deionized water. It is directly traceable to NIST Reference Standards and meets ISO Guide 31 on reference materials. A copy of the Certificate of Analysis will be included with each shipment.

186008049 - 550 mg/L Phosphate Calibration Standard
Part Number: 186008049
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Food
Detector UV
Product Type Standard
Shipping Formulation Liquid
Storage Room temp

info

186008113 - Major Mix IMS/Tof Calibration Kit

Part Number: 186008113

The Major Mix IMS/Tof Calibration Kit is intended to be used as a calibration solution for high resolution mass spectrometers equipped with ion mobility. This kit is also utilized in the on-board calibration of the VionTM IMS QTof system. The following items are included in the Major Mix IMS/Tof Calibration Kit: 2x ampoules each containing a 2 mL solution of the following in a 50:50 acetonitrile:water matrix. .01 mg/mL succinic acid 1 ng/µL salicylic acid 1 ng/µL theophylline 0.1 ng/µL pantothenic acid 2 ng/µL stearic acid 0.1 ng/µL perfluoroheptanoic acid 0.1 ng/µL perfluorooctanoic acid 0.1 ng/µL perfluorononanoic acid 0.1 ng/µL perfluorodecanoic acid 0.1 ng/µL perfluorododecanoic acid .03 mg/mL poly-DL-alanine .001% ultramark 1621 2x bottles each containing a 17 mL of the (49.95:49.95) acetonitrile:water + 0.1% formic acid. 2x LCMS QC Reference Standard (p/n 186006963) each containing a 500 μL mixture of the following components in a 5.7% acetonitrile/94.3% water + formic acid matrix. 10.0 μg/mL acetaminophen 1.5 μg/mL caffeine 5.0 μg/mL sulfaguanidine 1.0 μg/mL sulfadimethoxine 2.5 μg/mL Val,-Tyr-Val 0.2 μg/mL verapamil 0.2 μg/mL terfenadine 2.5 μg/mL leucine-enkephalin 0.6 μg/mL reserpine Store at -20°C ± 10ºC (frozen) upon arrival.

186008113 - Major Mix IMS/Tof Calibration Kit
Part Number: 186008113
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Packaging 1/pkg
Product Type Standard
Shipping Formulation Liquid
Storage Frozen -20 C
System LC/MS