Accessory Products

  Product    
info

186006961 - Waters Positive Pressure-96 Processor

Part Number: 186006961

Waters Positive Pressure-96 processor offers state-of-the-art operation for moving liquids through SPE 96-well devices. Each of the 96 holes in the processor manifold are restricted in order to maintain constant pressure, even if all the plate wells positions are not filled. SPE sample processing by positive pressure significantly improves the flow of viscous samples through SPE packed bed by providing highly uniform flow from well-to-wel,l which will ultimately improve the reproducibility of analytes SPE recoveries.

186006961 - Waters Positive Pressure-96 Processor
Part Number: 186006961
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

Waters Positive Pressure-96 processor offers state-of-the-art operation for moving liquids through SPE 96-well devices. Each of the 96 holes in the processor manifold are restricted in order to maintain constant pressure, even if all the plate wells positions are not filled. SPE sample processing by positive pressure significantly improves the flow of viscous samples through SPE packed bed by providing highly uniform flow from well-to-wel,l which will ultimately improve the reproducibility of analytes SPE recoveries.

info WAT200677 - Extraction manifold, 20-position/no rack
Part Number: WAT200677
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories
Category Manifold for Cartridges ( pp 26)

info WAT200685 - Long Needle Valve for Sep-Pak Device Vacuum Manifold, 20/pkg
Part Number: WAT200685
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

info

WAT037525 - End Connector Kit

Part Number: WAT037525
WAT037525 - End Connector Kit
Part Number: WAT037525
Products > Chromatography Consumables & Columns > Accessories > Fittings

info

WAT046910 - Holder kit for Cartridge and Guard Columns

Part Number: WAT046910

The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry guard column holders can be used with any HPLC column regardless of the manufacturer. Replacement o-rings (WAT023401, 2/pk) can be purchased to ensure a leak-free connection.

WAT046910 - Holder kit for Cartridge and Guard Columns
Part Number: WAT046910
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry guard column holders can be used with any HPLC column regardless of the manufacturer. Replacement o-rings (WAT023401, 2/pk) can be purchased to ensure a leak-free connection.

info

WAT097944 - Extraction Plate Manifold Kit A

Part Number: WAT097944

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 350 microliter sample collection plates

WAT097944 - Extraction Plate Manifold Kit A
Part Number: WAT097944
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 350 microliter sample collection plates

info

WAT097945 - Extraction Plate Manifold Kit B

Part Number: WAT097945

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 1 mL sample collection plates

WAT097945 - Extraction Plate Manifold Kit B
Part Number: WAT097945
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 1 mL sample collection plates

info

WAT097946 - Extraction Plate Manifold Kit C

Part Number: WAT097946

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 2 mL sample collection plates

WAT097946 - Extraction Plate Manifold Kit C
Part Number: WAT097946
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 2 mL sample collection plates

info WAT097958 - 2.1x10mm Holder Kit for Cartridges and Guard Columns
Part Number: WAT097958
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

info

186007012 - O-Ring Kit, 2/pkg

Part Number: 186007012
186007012 - O-Ring Kit, 2/pkg
Part Number: 186007012
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware
Category Guard Holder 120 (yo-yo)

info

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg

Part Number: WAT005137

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Part Number: WAT005137
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

info

WAT082887 - RCM 8X10 CARTRIDGE HOLDER

Part Number: WAT082887
WAT082887 - RCM 8X10 CARTRIDGE HOLDER
Part Number: WAT082887
Products > Chromatography Consumables & Columns > Accessories > Radial Compression

info

WAT038846 - RCM 8X10 EXTEION KIT

Part Number: WAT038846
WAT038846 - RCM 8X10 EXTEION KIT
Part Number: WAT038846
Products > Chromatography Consumables & Columns > Accessories > Radial Compression

info

715001531 - Beginners Guide to Liquid Chromatography

Part Number: 715001531

The “Beginners Guide to Liquid Chromatography”, a 56-page paperback book, is a useful tool for those learning about the technology of liquid chromatography (LC), with a focus on high-performance liquid chromatography (HPLC). The “Beginners Guide” offers an uncomplicated look at LC/HPLC and includes clear and colorful diagrams to acquaint the reader with basic concepts and terminology. No previous scientific training is required to obtain a better working knowledge of this powerful technology.

715001531 - Beginners Guide to Liquid Chromatography
Part Number: 715001531
Products > Chromatography Consumables & Columns > Accessories

The “Beginners Guide to Liquid Chromatography”, a 56-page paperback book, is a useful tool for those learning about the technology of liquid chromatography (LC), with a focus on high-performance liquid chromatography (HPLC). The “Beginners Guide” offers an uncomplicated look at LC/HPLC and includes clear and colorful diagrams to acquaint the reader with basic concepts and terminology. No previous scientific training is required to obtain a better working knowledge of this powerful technology.

info

WAT089592 - PrepPak® 1000 Module

Part Number: WAT089592

This spare part is a Waters Quality part

WAT089592 - PrepPak® 1000 Module
Part Number: WAT089592
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

This spare part is a Waters Quality part

info

700000117 - 2.1 mm Cartridge End Connector Kit

Part Number: 700000117

This P/N is required to connect all cartridges that have a 2.1 i.d. and lengths greater than 20 mm. This kit contains all necessary parts to use 2.1 mm i.d. cartridges with or without a Sentry 2.1 mm i.d. guard column.

700000117 - 2.1 mm Cartridge End Connector Kit
Part Number: 700000117
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

This P/N is required to connect all cartridges that have a 2.1 i.d. and lengths greater than 20 mm. This kit contains all necessary parts to use 2.1 mm i.d. cartridges with or without a Sentry 2.1 mm i.d. guard column.

info 186000262 - Cartridge Column Holder for 2.1 x 20 mm Cartridge Column
Part Number: 186000262
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

info

PSL904301 - 12 mm Handcrimper, 1/pkg

Part Number: PSL904301
PSL904301 - 12 mm Handcrimper, 1/pkg
Part Number: PSL904301
Products > Chromatography Consumables & Columns > Accessories

info WAT200606 - Extraction Manifold,20 pos, 13x75 mm tubes
Part Number: WAT200606
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

info

725000417 - Vacuum Pump 110/115 V 60H

Part Number: 725000417

This is an oil-less diaphragm pump with two gauges and regulators. The pump can be operated in vacuum or pressure modes. The pump comes plumbed with ¼” barbed fitting for use with vacuum hose. Pump: 1/8 Hp, ~25” Hg, 1.5 CFM Dimensions ~ 20 X 13 x 20 cm H x W x L

725000417 - Vacuum Pump 110/115 V 60H
Part Number: 725000417
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

This is an oil-less diaphragm pump with two gauges and regulators. The pump can be operated in vacuum or pressure modes. The pump comes plumbed with ¼” barbed fitting for use with vacuum hose. Pump: 1/8 Hp, ~25” Hg, 1.5 CFM Dimensions ~ 20 X 13 x 20 cm H x W x L