Accessories Water

  Product    
info

186006961 - Waters Positive Pressure-96 Processor

Part Number: 186006961

Waters Positive Pressure-96 processor offers state-of-the-art operation for moving liquids through SPE 96-well devices. Each of the 96 holes in the processor manifold are restricted in order to maintain constant pressure, even if all the plate wells positions are not filled. SPE sample processing by positive pressure significantly improves the flow of viscous samples through SPE packed bed by providing highly uniform flow from well-to-wel,l which will ultimately improve the reproducibility of analytes SPE recoveries.

186006961 - Waters Positive Pressure-96 Processor
Part Number: 186006961
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

Waters Positive Pressure-96 processor offers state-of-the-art operation for moving liquids through SPE 96-well devices. Each of the 96 holes in the processor manifold are restricted in order to maintain constant pressure, even if all the plate wells positions are not filled. SPE sample processing by positive pressure significantly improves the flow of viscous samples through SPE packed bed by providing highly uniform flow from well-to-wel,l which will ultimately improve the reproducibility of analytes SPE recoveries.

info

200000114 - Waters Open Access Kit

Part Number: 200000114

The Waters Open Access Kit consists of the following items: (1) 12x32 glass screw cap vials with pre-slit septa, (4) open Access plate assembly( 1 each of blue, red, yellow and green), and a kit list.

200000114 - Waters Open Access Kit
Part Number: 200000114
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule No

info

405000560 - Waters 24-position Vial Holder

Part Number: 405000560

The Waters® 24-position Rectangular Vial-Holder Plate can accomodate either 2mL autosampler vials or 1.5mL microcentrifuge tubes (Eppendorf® style) for use on the 2790/2795 Separations Module.

405000560 - Waters 24-position Vial Holder
Part Number: 405000560
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule No

info

405000562 - Waters 48-position Vial Holder

Part Number: 405000562

The Waters® 48-position Rectangular Vial-Holder Plate can accomodate either 2mL autosampler vials or 0.65mL microcentrifuge tubes (Eppendorf® style) for use on the 2790/2795 Separations Module. There are two types of 48-position plates: 6 rows x 8 columns and 8 rows by 6 columns.

405000562 - Waters 48-position Vial Holder
Part Number: 405000562
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule No

info

205000589 - ACQUITY/Alliance Bottle Accessory Kit

Part Number: 205000589

The ACQUITY UPLC/Alliance Bottle Accessory Kit includes clean borosilicate bottles, with Critical Clean fittings, to help minimize contaminates in the system. Kit Contents: 2 amber and 2 clear 1000mL bottles, 2 amber and 1 clear 500mL bottles, caps, filters, plugs and instruction sheet to ensure proper usage.

205000589 - ACQUITY/Alliance Bottle Accessory Kit
Part Number: 205000589
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category ACQUITY
Separations Module
Products 2695 Separations Module
2695D Dissolution Separations Module
2795 Separations Module
2796 Bioseparations Module
ACQUITY UPLC Binary Solvent Manager
Replacement Schedule As Needed

info

176002049 - ASAP Accessory, SQD/TQD

Part Number: 176002049

The Atmospheric Solids Analysis Probe (ASAP) is a useful tool for the rapid direct analysis of volatile and semi-volatile, solid and liquid samples using atmospheric pressure ionization. The probe is user installable. No additional software is required.

176002049 - ASAP Accessory, SQD/TQD
Part Number: 176002049
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Mass Spectrometry
Products 3100 Mass Detector
Single Quad Detector
Tandem Quadrupole Detector
Replacement Schedule As Needed

info

176002472 - ASAP Accessory, Synapt G2-Si, Xevo G2 (-S/XS) Tof/G2(-S/XS) QTof

Part Number: 176002472

The Atmospheric Solids Analysis Probe (ASAP) is a useful tool for the rapid direct analysis of volatile and semi-volatile, solid and liquid samples using atmospheric pressure ionization. The probe is user installable. No additional software is required.

176002472 - ASAP Accessory, Synapt G2-Si, Xevo G2 (-S/XS) Tof/G2(-S/XS) QTof
Part Number: 176002472
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Mass Spectrometry
Products SYNAPT G2-Si
Xevo G2 Q-Tof Mass Spec
Xevo G2 TOF Mass Spec
Xevo G2-S QTof
Xevo G2-S Tof
Xevo G2-XS QTof
Xevo G2-XS Tof
Replacement Schedule No

info

M702706CC1-S - Water Cooled Solids Probe

Part Number: M702706CC1-S

The Solids Probe is a direct introduction probe for the analysis of solid or low volatility liquid samples. The probe tip is water cooled to provide reduced analysis times and improved sample throughput. It is heatable from ambient temperature to 350°C. It uses the existing side entry probe vacuum lock and water cooling supplies.

M702706CC1-S - Water Cooled Solids Probe
Part Number: M702706CC1-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Mass Spectrometry
Products AutoSpec Mass Spectrometer
AutoSpec Premier Mass Spectrometer
Replacement Schedule As Needed

info WAT200677 - Extraction manifold, 20-position/no rack
Part Number: WAT200677
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories
Category Manifold for Cartridges ( pp 26)

info WAT200685 - Long Needle Valve for Sep-Pak Device Vacuum Manifold, 20/pkg
Part Number: WAT200685
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

info

WAT037525 - End Connector Kit

Part Number: WAT037525
WAT037525 - End Connector Kit
Part Number: WAT037525
Products > Chromatography Consumables & Columns > Accessories > Fittings

info

WAT046910 - Holder kit for Cartridge and Guard Columns

Part Number: WAT046910

The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry guard column holders can be used with any HPLC column regardless of the manufacturer. Replacement o-rings (WAT023401, 2/pk) can be purchased to ensure a leak-free connection.

WAT046910 - Holder kit for Cartridge and Guard Columns
Part Number: WAT046910
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry guard column holders can be used with any HPLC column regardless of the manufacturer. Replacement o-rings (WAT023401, 2/pk) can be purchased to ensure a leak-free connection.

info

WAT097944 - Extraction Plate Manifold Kit A

Part Number: WAT097944

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 350 microliter sample collection plates

WAT097944 - Extraction Plate Manifold Kit A
Part Number: WAT097944
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 350 microliter sample collection plates

info

WAT097945 - Extraction Plate Manifold Kit B

Part Number: WAT097945

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 1 mL sample collection plates

WAT097945 - Extraction Plate Manifold Kit B
Part Number: WAT097945
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 1 mL sample collection plates

info

WAT097946 - Extraction Plate Manifold Kit C

Part Number: WAT097946

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 2 mL sample collection plates

WAT097946 - Extraction Plate Manifold Kit C
Part Number: WAT097946
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

The Waters Vacuum Manifold for 96-well plates is ideally suited for vacuum extraction of all Waters 96-well plate products including Oasis, Ostro and Sep-Pak. The manifold kit comes with a spacer required for use with µElution plates. This kit includes an extraction plate manifold, reservoir trays, sealing caps and 2 mL sample collection plates

info WAT097958 - 2.1x10mm Holder Kit for Cartridges and Guard Columns
Part Number: WAT097958
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

info

186007012 - O-Ring Kit, 2/pkg

Part Number: 186007012
186007012 - O-Ring Kit, 2/pkg
Part Number: 186007012
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware
Category Guard Holder 120 (yo-yo)

info

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg

Part Number: WAT005137

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Part Number: WAT005137
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

info

WAT082887 - RCM 8X10 CARTRIDGE HOLDER

Part Number: WAT082887
WAT082887 - RCM 8X10 CARTRIDGE HOLDER
Part Number: WAT082887
Products > Chromatography Consumables & Columns > Accessories > Radial Compression

info

WAT038846 - RCM 8X10 EXTEION KIT

Part Number: WAT038846
WAT038846 - RCM 8X10 EXTEION KIT
Part Number: WAT038846
Products > Chromatography Consumables & Columns > Accessories > Radial Compression