Product Listing:  WAT271019 - Seal Pack Rebuild Kit w/Needle   to   205000119 - Fraction Collector 28mm Rack Kit

Sorted by Title
  Product    
info

WAT271019 - Seal Pack Rebuild Kit w/Needle

Part Number: WAT271019

The Seal Pack Rebuild Kit includes all of the parts necessary to replace seals in the seal body, including the high pressure seals. Replacement of these seals requires use of HPMV Tool Kit (WAT045427). The Rebuild Kit includes: one Teflon washer, one needlewash filter, one upper spacer, one lower spacer, one alignment tube, one wash tube seal, one needle, two high pressure seals, one compression screw, and one ferrule.

WAT271019 - Seal Pack Rebuild Kit w/Needle
Part Number: WAT271019
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

WAT271066 - Plunger Seals Replacement Kit (Black) 2/Pkg

Part Number: WAT271066

These optional (black) plunger seals for Waters® Alliance Solvent Management Systems are good alternatives if the standard seal (P/N WAT270938) does not perform well for your specific application.

WAT271066 - Plunger Seals Replacement Kit (Black) 2/Pkg
Part Number: WAT271066
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Replacement Schedule Annually

info

WAT271067 - Plunger, Oriented (Optional)

Part Number: WAT271067

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. The oriented crystalline structure of this sapphire plunger ensures a harder, smoother exterior surface than a standard plunger, making it even less susceptible to wear. Precise roundness and smoothness tolerances minimize the wear of the plunger seal, while alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts while safeguarding pump flow rates and system retention times. Included with the plunger is a pre-mounted C-Clip, which saves remounting time.

WAT271067 - Plunger, Oriented (Optional)
Part Number: WAT271067
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT271082 - Solvent Bottle Tray

Part Number: WAT271082

The Solvent Bottle Tray holds four 1-Liter bottles. The solvents should be placed above the gradient proportioning valve.

WAT271082 - Solvent Bottle Tray
Part Number: WAT271082
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT290188 - Microfuse 7A

Part Number: WAT290188

This spare part is a Waters Quality part.

WAT290188 - Microfuse 7A
Part Number: WAT290188
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

201000102 - REAGENT MANAGER PERFORMANCE MAINTENACE KIT

Part Number: 201000102

The Waters® Performance Maintenance Kit for the Reagent Manager contains all the Waters Quality Parts® necessary to keep your Reagent Manager operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Piston Seal Kit, Seal Flush Diaphragm, two filters, two Filter elements, four Check Valve Capsules and two 2µm Inline Filters.

201000102 - REAGENT MANAGER PERFORMANCE MAINTENACE KIT
Part Number: 201000102
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Pumps
Products Reagent Manager
Replacement Schedule Annually

info

201000107 - 2790/2795 PERFORMANCE MAINTENANCE KIT

Part Number: 201000107

The Waters® Performance Maintenance Kit for the 2790/2795 contains all the Waters Quality Parts® necessary to keep your 2790/2795 operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: one injection port seat, one injection port washer seal, one needle, one 500µL syringe, one filter insert assembly, two check valve cartidges, two plungers, two seals, four face seals, four seal wash tubes, seven solvent filters, one lithium battery, two seal wash face seals, two plunger wash seals, and one 2790 injector valve PM Kit.

201000107 - 2790/2795 PERFORMANCE MAINTENANCE KIT
Part Number: 201000107
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule Annually

info

201000114 - 1525 PERFORMANCE MAINTENANCE KIT

Part Number: 201000114

The Waters® Performance Maintenance Kit for the 1525 binary pump contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Four Clear-100 Seals, four sapphire plungers, eight PerformancePLUS cartridges, one reference valve rebuild kit, and two solvent filters.

201000114 - 1525 PERFORMANCE MAINTENANCE KIT
Part Number: 201000114
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Pumps
Products 1525 HPLC Pump
Replacement Schedule Annually

info

201000122 - RHEODYNE 7750E PERFORMANCE MAINTENANCE KIT

Part Number: 201000122

The Waters® Performance Maintenance Kit for the 7750ERheodyne injector contains all the Waters Quality Parts® necessary to keep your 7750E Rheodyne injector operating at peak performance. The Waters® Performance Maintenance Kit for the 7750E injector includes the following parts: One rotor, one rotor seal, and two allen wrenches.

201000122 - RHEODYNE 7750E PERFORMANCE MAINTENANCE KIT
Part Number: 201000122
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Injectors
Products Rheodyne Injector
Replacement Schedule As Needed

info

201000131 - 2475 PERFORMANCE MAINTENANCE KIT

Part Number: 201000131

The Waters® Performance Maintenance Kit for the 2475 Multi-Wavelength Fluorescence Detector contains all the Waters Quality Parts® necessary to keep your 2475 detector operating at peak performance. The kit also contains a detailed maintenance protocol, including calibration and diagnostic tests to ensure proper installation and function.The xenon lamp has a warranty for a lifetime of 2000 hours or 1 year, whichever comes first.

201000131 - 2475 PERFORMANCE MAINTENANCE KIT
Part Number: 201000131
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Detectors
Products 2475 Multi-channel Fluorescence Detector
Replacement Schedule Annually

info

201000144 - LOCK SPRAY PERFORMANCE MAINTENANCE KIT

Part Number: 201000144

The Waters® Performance Maintenance Kit for the optional Lockspray source found on earlier Mass Spectometers such as the Q-Tof I, Q-Tof II, Q-Tof Ulima, Q-Tof API-US and the Q-Tof micro contains all the Waters Quality Parts® necessary to keep you operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: probe tip, o-rings, tubing and other components to re-build the lockspray probe.

201000144 - LOCK SPRAY PERFORMANCE MAINTENANCE KIT
Part Number: 201000144
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products LCT Mass Spectrometer
Q-Tof II Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Q-Tof micro Mass Spectrometer
Replacement Schedule Annually

info

201000174 - ACQUITY SAMPLE MANAGER PERFORMANCE MAINTENANCE KIT

Part Number: 201000174

The Waters® Performance Maintenance Kit for the ACQUITY Sample Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: air chassis filter, injector outlet tubes, needle, system outlet tubes, inject valve pod, wash syringe, injector syringe, sample loop and o-ring.

201000174 - ACQUITY SAMPLE MANAGER PERFORMANCE MAINTENANCE KIT
Part Number: 201000174
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY UPLC Sample Manager
Replacement Schedule Annually

info

201000178 - MALDI TOF PERFORMANCE MAINTENANCE

Part Number: 201000178

The Waters® Performance Maintenance Kit for the MALDI micro MX ,MALDI LR, MALDI L, and MALDI R Mass Spectrometers contains all the Waters Quality Parts® necessary to keep yourinstrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kitincludes the following parts: Source component and vacuum pump components.

201000178 - MALDI TOF PERFORMANCE MAINTENANCE
Part Number: 201000178
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products MALDI LR Mass Spectometer
MALDI micro MX Mass Spectrometer
Replacement Schedule Annually

info

201000182 - NANOACQUITY SAMPLE MANAGER PERFORMANCE MAINTENANCE KIT

Part Number: 201000182

The Waters® Performance Maintenance Kit for the nanoACQUITY Sample Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annula basis. The Waters® Performance Maintenance Kit includes the following parts: air chassis filter, injector outlet tubes, needle, system outlet tubes, inject valve pod, wash syringe, injector syringe, sample loop and o-ring and vent valve cartridge. The nanoACQUITY Sample Manager PM kit fits into the 5000psi and 10,000psi nanoACQUITY systems.

201000182 - NANOACQUITY SAMPLE MANAGER PERFORMANCE MAINTENANCE KIT
Part Number: 201000182
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category nanoACQUITY
Products High Pressure nanoACQUITY UPLC Sample Manager
nanoACQUITY UPLC Sample Manager
nanoACQUITY UPLC with 2D Technology
Replacement Schedule Annually

info

201000193 - ACQUITY FLR DETECTOR PERFORMANCE MAINTENANCE KIT

Part Number: 201000193

The Waters® Performance Maintenance Kit for the ACQUITY Fluorescence Detector contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: lamp.

201000193 - ACQUITY FLR DETECTOR PERFORMANCE MAINTENANCE KIT
Part Number: 201000193
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY UPLC Fluorescence Detector
Replacement Schedule Annually

info

201000196 - 2707 AUTOSAMPLER PERFORMANCE MAINTENANCE KIT

Part Number: 201000196

The Waters® Performance Maintenance Kit for the 2707 Autosampler contains all the Waters Quality Parts® necessary to keep your 2707 Autosampler operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: air needle (62mm), standard needle assembly, wash station with screws, a syringe valve, buffer tubing (1000µL), rotor seal and 500µL syringe.

201000196 - 2707 AUTOSAMPLER PERFORMANCE MAINTENANCE KIT
Part Number: 201000196
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Injectors
Products 2707 Autosampler
Replacement Schedule Annually

info

201000197 - ACQUITY I2V BSM PERFORMANCE MAINTENANCE KIT

Part Number: 201000197

The Waters® Performance Maintenance Kit for the ACQUITY I2V BSM contains all the Waters Quality Parts® necessary to keep your ACQUITY I2V BSM operating at peak performance. The kit also contains a detailed maintenance protocol, including calibration and diagnostic tools to ensure proper installation and function. The Waters® Performance Maintenance Kit for the ACQUITY I2V BSM includes the following parts: tubing (transducer to check vlv), air filter, plungers, flanged seals, wash seals, teflon o-ring, mixer assembly, check valves, solvent bottle filters, I2V cartridge, filter cartridge, and tubing (SSV to I2V). BSMs fitted with the new intelligent intake valve (I2V) began on June 14, 2007 and the cut over serial number is F07UPB573M.

201000197 - ACQUITY I2V BSM PERFORMANCE MAINTENANCE KIT
Part Number: 201000197
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY UPLC I2V Binary Solvent Manager
Replacement Schedule As Needed

info

201000215 - QUATTRO PREMIER/XE (SCROLL) PERFORMANCE MAINTENANCE KIT

Part Number: 201000215

The Waters® Performance Maintenance Kit for the Quattro Premier/XE (scroll) Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit for the Quattro Premier/XE (scroll) Mass Spectrometer includes the following parts: Source components, ESI probe components and vacuum pump components. The original part number was 201000180. This particular part number does not deliver a chemical kit which is required to complete the performance testing. The part number for a Waters® Performance Maintenance Kit and a chemical kit is 176002054.

201000215 - QUATTRO PREMIER/XE (SCROLL) PERFORMANCE MAINTENANCE KIT
Part Number: 201000215
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Replacement Schedule Annually

info

201000216 - SQD/TQD/3100 PERFORMANCE MAINTENANCE KIT

Part Number: 201000216

The Waters® Performance Maintenance Kit for the SQD/TQD/3100 Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance. The Waters® Performance Maintenance Kit for the SQD/TQD/3100 Mass Spectrometer includes the following parts: Source components, ESI probe components, and vacuum pump components. The original part number was 201000190. This particular part number does not deliver a chemical kit which is required to complete the performance testing. The part number for a Waters® Performance Maintenance Kit and a chemical kit is 176002064

201000216 - SQD/TQD/3100 PERFORMANCE MAINTENANCE KIT
Part Number: 201000216
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
Single Quad Detector
Tandem Quadrupole Detector
Replacement Schedule Annually

info

201000220 - QUATTRO ULTIMA/PT PERFORMANCE MAINTENANCE KIT

Part Number: 201000220

The Waters® Performance Maintenance Kit for the Quattro Ultima/Ultima Pt Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit for the Quattro Ultima/Ultima Pt Mass Spectrometer includes the following parts: Source components, ESI probe components and vacuum pump components. The original part number was 201000175. This particular part numberdoes not deliver a chemical kit which is required to complete the performance testing. The Performance Maintenance Kit with Chemical Kit is 176002055.

201000220 - QUATTRO ULTIMA/PT PERFORMANCE MAINTENANCE KIT
Part Number: 201000220
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Replacement Schedule Annually

info

201000224 - QTOF ULTIMA PERFORMANCE MAINTENANCE KIT

Part Number: 201000224

The Waters® Performance Maintenance Kit for the Q-Tof Ultima Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source component, ESI probe components and vacuum pump components. This particular part number does not deliver a chemical kit which is required to complete the performance testing. Performance Maintenance Kit with Chemical Kit part number is 176002076.

201000224 - QTOF ULTIMA PERFORMANCE MAINTENANCE KIT
Part Number: 201000224
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products Q-Tof Ultima API Mass Spectrometer
Replacement Schedule Annually

info

201000233 - ACQUITY H QSM PERFORMANCE MAINTENANCE KIT

Part Number: 201000233

The Waters® Performance Maintenance Kit for the ACQUITY Quaternary Solvent Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: mixer, plungers, check valves seals and filters.

201000233 - ACQUITY H QSM PERFORMANCE MAINTENANCE KIT
Part Number: 201000233
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
Replacement Schedule Annually

info

201000250 - Performance Maintenance Kit, ACQUITY UPLC Online SPE Manager

Part Number: 201000250

The Waters® Performance Maintenance Kit for the ACQUITY UPLC Online SPE Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: punches, HPD syringe, tube assys, injector pod and rotor seals.

201000250 - Performance Maintenance Kit, ACQUITY UPLC Online SPE Manager
Part Number: 201000250
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products UPLC with On-Line SPE Technology
Replacement Schedule Annually

info

201000252 - Xevo TQD / SQD 2 (Rotary Pump) Performance Maintenance Kit

Part Number: 201000252

This Waters® Performance Maintenance Kit is a hardware PM Kit only. There is no chemical kit included. The part number for the PM Kit with chemistry is part number 176002780.

201000252 - Xevo TQD / SQD 2 (Rotary Pump) Performance Maintenance Kit
Part Number: 201000252
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products SQ Detector 2
Xevo TQD
Replacement Schedule Annually

info

201000259 - ACQUITY I-CLASS SMP MGR-FTN PERFORMANCE MAINTENANCE KIT

Part Number: 201000259

The Waters® Performance Maintenance Kit for the ACQUITY I-Class Sample Manager - Flow Through Needle contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: syringe, std needle, needle seat, injection cartridge and filters.

201000259 - ACQUITY I-CLASS SMP MGR-FTN PERFORMANCE MAINTENANCE KIT
Part Number: 201000259
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY I-Class SM-FTN
Replacement Schedule Annually

info

201000260 - ACQUITY I-Class BSM 18K Performance Maintenance Kit

Part Number: 201000260

The Waters® Performance Maintenance Kit for the ACQUITY I-Class Binary Solvent Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: plungers, check valves, seals and filters.

201000260 - ACQUITY I-Class BSM 18K Performance Maintenance Kit
Part Number: 201000260
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY I-Class BSM
Replacement Schedule Annually

info

201000271 - UPC² Sample Manager FL Peformance Maintenance Kit

Part Number: 201000271

The Waters® Performance Maintenance Kit for the UPC² Fixed Loop Sample Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: air chassis filter, injector outlet tubes, needle, system outlet tubes, inject valve pod, wash syringe, injector syringe, sample loop and o-ring.

201000271 - UPC² Sample Manager FL Peformance Maintenance Kit
Part Number: 201000271
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY UPC2 SM-FL
Replacement Schedule Annually

info

201000281 - ACQUITY PDA/TUV 2489/2998 PERFORMANCE MAINTENANCE KIT

Part Number: 201000281

The Waters® Performance Maintenance Kit for the ACQUITY UPLC TUV/PDA contains all of the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. It is used in ACQUITY UPLC PDA Detectors, ACQUITY eLambda PDA Detector, ACQUITY UPLC TUV Detectors, 2489 Dual Wavelength UV Detector and the 2998 PDA Detector. The old part number was 201000186. The Waters® Performance Maintenance Kit includes the following parts: PerformancePLUS™ Long Life Lamp which is warranted for a lifetime of 2000 hours or 1 year, whichever comes first.

201000281 - ACQUITY PDA/TUV 2489/2998 PERFORMANCE MAINTENANCE KIT
Part Number: 201000281
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Detectors
Products 2489 UV/Visible Detector
2998 Photodiode Array Detector
ACQUITY UPLC PDA Detector
ACQUITY UPLC TUV Detector
ACQUITY UPLC eLAmbda PDA Detector
Replacement Schedule Annually

info

201000301 - ACQUITY QDA (KAB) P PERFORM MAINT KIT

Part Number: 201000301

The Waters® Performance Maintenance Kit for the QDa (Performance) contains most of the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source components and vacuum pump components. It is also recommended that the ESI probe is also replaced at the same time, these are specific to your system configuration and should be ordered separately. This Waters® Performance Maintenance Kit is required for serial numbers KAB1052 or higher, if your serial number is an earlier unit you will also need to order 700010377 Ion Block Assy MKII if it hasn't already been fitted.

201000301 - ACQUITY QDA (KAB) P PERFORM MAINT KIT
Part Number: 201000301
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Replacement Schedule Annually

info

205000119 - Fraction Collector 28mm Rack Kit

Part Number: 205000119

The 28mm Fraction Collector Rack allows for the collection of samples into 28mm OD scintillation vials.

205000119 - Fraction Collector 28mm Rack Kit
Part Number: 205000119
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Injectors
Products 2757 Sample Manager
2767/2747 Sample Manager
Replacement Schedule As Needed