Product Listing:  186002789 - Aluminum Foil Laminate Heat Seal 100/pkg   to   700001795 - Tubing, PEEK, 0.06in. x 0.010in. x 50ft.

Sorted by Best Sellers
  Product    
info

186002789 - Aluminum Foil Laminate Heat Seal 100/pkg

Part Number: 186002789

Aluminum Foil Heat Seal - is good for most solvents used in laboratories. The seal can be used over the temperature range from -200 to 90 C. Requires a heat sealer to apply.

186002789 - Aluminum Foil Laminate Heat Seal 100/pkg
Part Number: 186002789
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2795
Waters Acquity
Certified Not Certified
Format Heat Sealer
Units in Package 100/pkg

info

700011138 - Synthetic Vacuum Pump Oil

Part Number: 700011138

Synthetic Vacuum Pump Oil

700011138 - Synthetic Vacuum Pump Oil
Part Number: 700011138
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Vacuum fittings/components
Product Category Mass Spectrometry
Products SQ Detector 2
SYNAPT G2-Si
Single Quad Detector
Tandem Quadrupole Detector
Xevo G2-XS QTof
Xevo TQ-S MS
Xevo TQ-S micro
Xevo TQD
Replacement Schedule As Needed

info

186001337 - Atlantis dc18 Column, 100Å, 3 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: 186001337

Atlantis dC18 columns are universal, silica-based, reversed-phase C18 columns that are used for polar compound retention. The Atlantis dC18 columns feature di-functionally bonded C18 ligands that have been optimized for use with highly aqueous mobile phases, including 100% water.

186001337 - Atlantis dc18 Column, 100Å, 3 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: 186001337
Brand: Atlantis

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 12
Bonding Technology dc18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Size (dp) 3 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 330
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 3 - 7

info

176003595 - XBridge Protein BEH SEC Column, 200Å, 3.5 µm, 7.8 mm X 150 mm, and BEH 200Å Protein Standard Mix

Part Number: 176003595

This column and standard kit includes the BEH200 SEC Protein Standard Mix (P/N 186006518 ) and an Xbridge Protein BEH SEC 200A Column ideally suited for HPLC-based SEC separations.

176003595 - XBridge Protein BEH SEC Column, 200Å, 3.5 µm, 7.8 mm X 150 mm, and BEH 200Å Protein Standard Mix
Part Number: 176003595
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns > XBridge Columns
% Carbon Load 12
Application Protein
Chemistry SEC
Endcapped No
Endfitting Type Waters
Format Column
ID 7.8 mm
Length (mm) 150 mm
Mode SEC/GPC
Molecular Weight Range 10K - 500K
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 200Å
QC Tested Protein
Silanol Activity Low
Surface Area 220
System HPLC
Technology BEH
USP Classification L33
Units in Package 1/pkg
pH Range 1 - 8

info

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026805

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026805
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.040 in. (1.02 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

186003462 - ACQUITY UPLC BEH HILIC Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: 186003462

ACQUITY BEH HILIC columns contain unbonded BEH substrate and are designed to retain and separate very polar compounds. These unique columns are optimized and tested to produce efficient, reproducible separations under HPLC HILIC conditions. More rugged than silica based HILIC phases, the BEH particle’s chemical stability results in long column lifetimes.

186003462 - ACQUITY UPLC BEH HILIC Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: 186003462
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
Chemistry HILIC
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Hydrophilic Interaction (HILIC)
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
Surface Area 185
System UPLC/UHPLC
Technology BEH
USP Classification L3
Units in Package 1/pkg
pH Range 1 - 9

info

JJAN11545 - Ultrahydrogel Column, Linear, 10 µm, 7.8 mm X 300 mm, 500 - 10M, Water , 1/pkg

Part Number: JJAN11545

Ideal for the analysis of aqueous-soluble samples, such as; oligomers; oligosaccharides; polysaccharides; and cationic, anionic and amphoteric polymers.

JJAN11545 - Ultrahydrogel Column, Linear, 10 µm, 7.8 mm X 300 mm, 500 - 10M, Water , 1/pkg
Part Number: JJAN11545
Brand: Ultrahydrogel
Ultrahydrogel®

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Endfitting Type Parker-style
Format Column
ID 7.8 mm
Length (mm) 300 mm
Mode SEC/GPC
Molecular Weight Range 500 - 10M
Particle Shape Spherical
Particle Size (dp) 10 µm
Particle Substrate Polymer
Pore Size Linear
Solvent Water
USP Classification L25
Units in Package 1/pkg
pH Range 2 - 12

info

WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg

Part Number: WAT271018

Integral to the 2690 and 2790 Separations Modules, these seals are part of the seal wash system and help ensure that plunger seal life is maximized.

WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg
Part Number: WAT271018
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems

info

WAT022330 - Ferrule, 1/16, annealed

Part Number: WAT022330

This is a standard stainless steel ferrule.

WAT022330 - Ferrule, 1/16, annealed
Part Number: WAT022330
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

6416004-S1 - Tube, PTFE, 1.6 x 0.12 x 1m

Part Number: 6416004-S1

This spare part is part of the NanoLockspray Option.

6416004-S1 - Tube, PTFE, 1.6 x 0.12 x 1m
Part Number: 6416004-S1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products Q-Tof Premier Mass Spectrometer
SYNAPT™ MS
Synapt High Definition MS System™
Replacement Schedule As Needed

info

WAT026770 - IC-Pak Anion HC Column, 4.6 x 150 mm

Part Number: WAT026770

Waters offers an array of products for ion chromatography . IC-Pak resin based columns allow you to analyze a full range of ions from numerous sample matrices, both simple and complex. They offer an exceptional linear loading range of less than 1.0 ppb to greater than 400 ppm without dilution and without pH limitation on eluent or sample. The flexibility exists for accurate and reproducible anion and cation analyses at all concentration levels.

WAT026770 - IC-Pak Anion HC Column, 4.6 x 150 mm
Part Number: WAT026770
Brand: IC-Pak HC

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Anion-exchange
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Ion-Exchange
Particle Size (dp) 10 µm
Units in Package 1/pkg

info

186006156 - XSelect HSS T3 XP Column, 100Å, 2.5 µm, 4.6 mm X 30 mm, 1/pkg

Part Number: 186006156

The trifunctional alkyl C18 bonded phase used for the HSS T3 sorbents is compatible with 100% aqueous mobile phase and provides ultra-low MS bleed, while promoting superior polar compound retention. HSS T3 HPLC columns are fully scalable and transferable to UPLC separations.

186006156 - XSelect HSS T3 XP Column, 100Å, 2.5 µm, 4.6 mm X 30 mm, 1/pkg
Part Number: 186006156
Brand: XSelect

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 11
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format XP Column
ID 4.6 mm
Length (mm) 30 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 230
System HPLC
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186007378 - CORTECS C18 Column, 90Å, 2.7 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: 186007378

CORTECS C18 Columns are general purpose, high-efficiency columns based on a solid-core particle that offer balanced retention of acids, bases and neutrals at low and mid-range pH.

186007378 - CORTECS C18 Column, 90Å, 2.7 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: 186007378
Brand: CORTECS

Products > Chromatography Consumables & Columns
% Carbon Load 6.6
Chemistry C18
Endcapped Yes
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.7 µm
Particle Substrate Solid-Core
Pore Size 90Å
Silanol Activity Low
Surface Area 100
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT054945 - Sep-Pak C18 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT054945

Silica-based octadecyl bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages.

WAT054945 - Sep-Pak C18 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT054945
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 200 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186006841 - 2-AB Dextran Calibration Ladder

Part Number: 186006841

In order to take full advantage of the BEH glycan column, Waters created the 2-aminobenzamide labeled 2-AB Dextran Calibration Ladder Standard to assist glycan profiling. Glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the 2AB-labeled dextran ladder and assigned with glucose unit (GU) values. Waters 2-AB labeled Dextran Calibration Ladder is different than the existing commercial offerings. The average molecular weight of the glucose homopolymer is higher (~4,500 Dalton), therefore, the workable GU value range is twice as much as the other dextran ladder standards; the observed GU goes from 2 to 30. This feature improves the large glycan retention time assignment.

186006841 - 2-AB Dextran Calibration Ladder
Part Number: 186006841
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Packaging 1/pkg
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System LC/MS

info

176003606 - Glycoworks RapiFluor-MS N-Glycan Kit-96 sample

Part Number: 176003606

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in as little as 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS's (RFMS) unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive. This core kit includes the GlycoWorks Deglycosylation Module, GlycoWorks Labeling Module, GlycoWorks Clean-up Module, and the GlycoWorks Sample Collection Module. It contains materials to process 96 samples in a 4x24 format. The kit contains: GlycoWorks Deglycosylation Module: (4) 0.035 ml/vial Rapid PNGaseF Enzyme (4) 0.25 ml/vial Glycoworks Rapid Buffer (1) 4 vials of 10 mg/vial RapiGest SF Surfactant (1) Intact mAb Mass Check Standard *Shipped in a separate box GlycoWorks RapiFluor-MS Labeling Module: (4) 23 mg/vial RapiFluor-MS Reagent (4) 1 ml/vial Reagent Solvent (Anhydrous DMF) GlycoWorks RFMS Clean-up Module: (4) 0.5 ml/vial Elution Buffer (200mM Ammonium Acetate 95/5 Water/ACN pH 7) (4) 3 ml/vial Sample Diluent (DMF/ACN Mixture) (1) GlycoWorks HILIC µElution Plate GlycoWorks Sample Collection Module: (15) 1 mL tubes for deglycosylation and labeling reaction (15) 600 µL tube inserts for SPE eluate collection (15) Cap strips with slits for direct injection (1) 1 mL round collection tray (1) Waste tray

176003606 - Glycoworks RapiFluor-MS N-Glycan Kit-96 sample
Part Number: 176003606
Brand: GlycoWorks

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Column Chemistry HILIC
Detector Fluorescence (FLR)
Packaging Kit
Product Type Kit
Shipping Formulation Liquid & Solid
System LC/MS

info

WAT086688 - µBondapak Cyano (CN) Column, 125Å, 10 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: WAT086688

If your method calls for µBondapak packings, there is only one µBondapak packing material. Many companies claim to have columns with µBondapak-like selectivity but not one has ever passed Waters stringent QC batch test. Waters set the standard for reproducible, high-performance chromatographic columns. Waters µBondapak columns are still the most widely referenced and requested columns in the world.

WAT086688 - µBondapak Cyano (CN) Column, 125Å, 10 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT086688
Brand: µBondapak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 6
Chemistry Cyano (CN)
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Irregular
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 125Å
Silanol Activity High
Surface Area 330
USP Classification L10
Units in Package 1/pkg
pH Range 2 - 8

info

700008977 - Assy Needle 15µL w/guide and seat 18KPSI

Part Number: 700008977

ACQUITY I-Class FTN Needle Assembly, 15µL w/guide and seat 18KPSI

700008977 - Assy Needle 15µL w/guide and seat 18KPSI
Part Number: 700008977
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Needles
Product Category ACQUITY
Products ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

WAT094170DV - Deactivated 300uL glass insert with poly spring, 100pk

Part Number: WAT094170DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

WAT094170DV - Deactivated 300uL glass insert with poly spring, 100pk
Part Number: WAT094170DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Bruker
Dynatech
Finnigan
Fisons
Gilson
Hitachi
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2695
Waters 2795
Waters Acquity
Certified Not Certified
Format Low Volume Inserts and Springs
GlassType Deactivated
Units in Package 100/pkg
Volume Capacity 300 µL

info

700002789 - 2695 Phase II Injector Assembly

Part Number: 700002789

The new 2695 Injector Assembly includes only the new injector.To upgrade a 2695 to the new injector assembly, you must order both the new injector (part number 700002789) and the Upgrade Kit (part Number 700002790).

700002789 - 2695 Phase II Injector Assembly
Part Number: 700002789
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Separations Module
Products 2695 Separations Module
2695D Dissolution Separations Module
Replacement Schedule As Needed

info

JJAN20131 - Sep-Pak PS2 Plus Short Cartridge, 300 mg Sorbent per Cartridge, 80 µm Particle Size, 50/pk

Part Number: JJAN20131

Styrene-divinylbenzene copolymer packed in a Sep-Pak Plus short body cartridge. PS2 applications include concentration of pesticides and herbicides in water. This cartridge is used in Japan pesticide methods #5,6 and 9. AC2 connected in series with PS2 was adopted as the official method for the extraction of pesticides from water by JPMHW.

JJAN20131 - Sep-Pak PS2 Plus Short Cartridge, 300 mg Sorbent per Cartridge, 80 µm Particle Size, 50/pk
Part Number: JJAN20131
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry PS2
Format/Type Plus Short Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 80 µm
Sorbent Substrate Styrene-Divinylbenzene
Sorbent Weight 300 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 0 - 14 pH

info

700003443 - Tubing, Roll, .0025 x 60in.

Part Number: 700003443

PEEK Tubing, .0025 ID x 60 inches long

700003443 - Tubing, Roll, .0025 x 60in.
Part Number: 700003443
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY UPLC Column Manager
Replacement Schedule As Needed

info

186003538 - ACQUITY UPLC HSS T3 Column, 100Å, 1.8 µm, 2.1 mm X 50 mm, 1/pkg

Part Number: 186003538

The universal, silica-based bonded phase used for the ACQUITY HSS T3 sorbents is compatible with 100% aqueous mobile phase and should be your first choice when developing separations for polar and non-polar compounds. The ACQUITY HSS T3 UPLC columns exhibit ultra-low MS bleed and are fully scalable and transferable to HPLC separations.

186003538 - ACQUITY UPLC HSS T3 Column, 100Å, 1.8 µm, 2.1 mm X 50 mm, 1/pkg
Part Number: 186003538
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 11
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.8 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 230
System UPLC/UHPLC
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info 186007238 - nanoACQUITY UPLC Symmetry C18 Trap Column, 100Å, 5 µm, 180 µm x 20 mm, 2D, V/M, 1/pkg
Part Number: 186007238
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > Nano and Micro LC Columns > nanoACQUITY UPLC Columns
Chemistry C18
Format nanoACQUITY Trap 10K psi MV
ID 180 µm
Length (mm) 20 mm
Mode Reversed-Phase
Particle Size (dp) 5 µm
Pore Size 100Å
Silanol Activity Low
System Nano/Micro
Units in Package 1/pkg
pH Range 1 - 10

info

405011492 - Needle Seat

Part Number: 405011492

The needle seat is a spare part used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sm-FTN. The original part number was 405008397 and the new replacement part number is 405011492.

405011492 - Needle Seat
Part Number: 405011492
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

WAT026765 - IC-Pak Anion HR Column, 4.6 x 75 mm

Part Number: WAT026765

Waters offers an array of products for ion chromatography . IC-Pak resin based columns allow you to analyze a full range of ions from numerous sample matrices, both simple and complex. They offer an exceptional linear loading range of less than 1.0 ppb to greater than 400 ppm without dilution and without pH limitation on eluent or sample. The flexibility exists for accurate and reproducible anion and cation analyses at all concentration levels.

WAT026765 - IC-Pak Anion HR Column, 4.6 x 75 mm
Part Number: WAT026765
Brand: IC-Pak HR

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Anion-exchange
Format Column
ID 4.6 mm
Length (mm) 75 mm
Mode Ion-Exchange
Particle Size (dp) 6 µm
Units in Package 1/pkg

info

700005054 - O-Ring Removal Tool

Part Number: 700005054

Brass O-Ring Removal Tool

700005054 - O-Ring Removal Tool
Part Number: 700005054
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category Mass Spectrometry
Products 3100 Mass Detector
Single Quad Detector
Tandem Quadrupole Detector
SPECVALUE134881948
Xevo G2 Q-Tof Mass Spec
Xevo Q-Tof Mass Spec
Xevo TQ-S MS
Replacement Schedule As Needed

info

WAT084040 - µBondapak Amino (NH2) Column, 125Å, 10 µm, 3.9 mm X 300 mm, 1/pkg

Part Number: WAT084040

If your method calls for µBondapak packings, there is only one µBondapak packing material. Many companies claim to have columns with µBondapak-like selectivity but not one has ever passed Waters stringent QC batch test. Waters set the standard for reproducible, high-performance chromatographic columns. Waters µBondapak columns are still the most widely referenced and requested columns in the world.

WAT084040 - µBondapak Amino (NH2) Column, 125Å, 10 µm, 3.9 mm X 300 mm, 1/pkg
Part Number: WAT084040
Brand: µBondapak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4
Chemistry Amino (NH2)
Endcapped No
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 300 mm
Mode Normal-Phase
Particle Shape Irregular
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 125Å
Silanol Activity High
Surface Area 330
USP Classification L8
Units in Package 1/pkg
pH Range 2 - 8

info

186008100 - Glycoworks Rapid Buffer, 5ml

Part Number: 186008100

The Glycoworks Rapid Buffer, 5ml is a supplemental part number for customers using the GlycoWorks RapiFluor-MS N-Glycan-96 and -24 sample kits. It is a concentrated, bulk solution of the customized rapid buffer used in the suggested deglycosylation method, This buffer is provided for customers who need to do buffer exchange before running their samples with the kit.

186008100 - Glycoworks Rapid Buffer, 5ml
Part Number: 186008100
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Column Chemistry HILIC
Detector Fluorescence (FLR)
Packaging 1/pkg
Product Type Reagent
Shipping Formulation Liquid
Storage Refrigerator 2 to 8 C
System LC/MS

info

700001795 - Tubing, PEEK, 0.06in. x 0.010in. x 50ft.

Part Number: 700001795

This spare part is a Waters Quality part

700001795 - Tubing, PEEK, 0.06in. x 0.010in. x 50ft.
Part Number: 700001795
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Detectors
Products 2488 Multichannel UV/Vis Detector
Replacement Schedule As Needed