Product Listing:  700001194 - O-Ring, Viton 12 x 1.5, Sample Cone   to   186000327C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Sorted by Best Sellers
  Product    
info

700001194 - O-Ring, Viton 12 x 1.5, Sample Cone

Part Number: 700001194

This spare part is a Waters Quality part.

700001194 - O-Ring, Viton 12 x 1.5, Sample Cone
Part Number: 700001194
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category O-rings
Product Category Mass Spectrometry
Products 3100 Mass Detector
EMD 1000 Mass Spectrometer
LCT Premier
LCT Premier XE
Q-Tof API US Mass Spectrometer
Q-Tof Premier Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro Mass Spectrometer
SYNAPT™ MS
Single Quad Detector
Synapt High Definition MS System™
Tandem Quadrupole Detector
ZQ Mass Spectrometer
Replacement Schedule As Needed
sparepartsystemscategory LCMS

info

WAT200839 - Acrodisc, Syringe Filter, PVDF, 25 mm, 0.2 µm, Protein, 1000/case

Part Number: WAT200839

This PVDF membrane works well with both aqueous and organic solvents

WAT200839 - Acrodisc, Syringe Filter, PVDF, 25 mm, 0.2 µm, Protein, 1000/case
Part Number: WAT200839
Brand: Acrodisc

Products > Chromatography Consumables & Columns > Laboratory Filters
Diameter 25 mm
Format Syringe Filter
Hold-up Volume < 100 µL
Housing Polypropylene
Pore Size 0.2 µm
Sample Volume < 100 mL
Separation Mode Protein
Solvent/Sample Compatible PVDF
Units in Package 1000/case

info

700001008 - Tubing, 0.062in. x 0.0025in. x 6ft, PEEK

Part Number: 700001008

This spare part is a Waters Quality part.

700001008 - Tubing, 0.062in. x 0.0025in. x 6ft, PEEK
Part Number: 700001008
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Capillary LC
Products CapLC System
CapLC XE System
Replacement Schedule As Needed

info

JJAN20131 - Sep-Pak PS2 Plus Short Cartridge, 300 mg Sorbent per Cartridge, 80 µm Particle Size, 50/pk

Part Number: JJAN20131

Styrene-divinylbenzene copolymer packed in a Sep-Pak Plus short body cartridge. PS2 applications include concentration of pesticides and herbicides in water. This cartridge is used in Japan pesticide methods #5,6 and 9. AC2 connected in series with PS2 was adopted as the official method for the extraction of pesticides from water by JPMHW.

JJAN20131 - Sep-Pak PS2 Plus Short Cartridge, 300 mg Sorbent per Cartridge, 80 µm Particle Size, 50/pk
Part Number: JJAN20131
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry PS2
Format/Type Plus Short Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 80 µm
Sorbent Substrate Styrene-Divinylbenzene
Sorbent Weight 300 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 0 - 14 pH

info

WAT034106 - Shodex KF-G Guard Column, 5 µm, 4.6 x 10 mm (THF)

Part Number: WAT034106

Ultrahigh efficiency GPC columns

WAT034106 - Shodex KF-G Guard Column, 5 µm, 4.6 x 10 mm (THF)
Part Number: WAT034106
Brand: Shodex
Shodex

Products > Chromatography Consumables & Columns > GPC & SEC Columns > GPC & SEC Columns
Endfitting Type Shodex
Format Guard Column
ID 4.6 mm
Length (mm) 10 mm
Mode SEC/GPC
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Polymer
Solvent THF
Units in Package 1/pkg
pH Range 2 - 12

info

WAT046970 - Symmetry C8 Column, 100Å, 5 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: WAT046970

Symmetry C8 columns feature monofunctionally bonded C8 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results.

WAT046970 - Symmetry C8 Column, 100Å, 5 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT046970
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 11.7
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 8

info

186006151 - XSelect HSS T3 XP Column, 100Å, 2.5 µm, 2.1 mm X 100 mm, 1/pkg

Part Number: 186006151

The XSelect HSS T3 is a low-coverage C18 phase compatible with 100% aqueous mobile phase and should be your first choice when developing separations for polar and non-polar compounds. The XSelect HSS T3 columns exhibit ultra-low MS bleed and are fully scalable and transferable to UPLC separations. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.

186006151 - XSelect HSS T3 XP Column, 100Å, 2.5 µm, 2.1 mm X 100 mm, 1/pkg
Part Number: 186006151
Brand: XSelect

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 11
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format XP Column
ID 2.1 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 230
System HPLC
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186000432 - XTerra MS C18 Column, 125Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg

Part Number: 186000432

XTerra MS C18 columns are general purpose, hybrid-based, reversed-phase C18 columns that are designed to be compatible with mass spectrometry applications. These first generation columns provide superior pH stability compared to a silica-based column.

186000432 - XTerra MS C18 Column, 125Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg
Part Number: 186000432
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15.5
Bonding Technology MS C18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

186007496 - ACQUITY UPLC M-Class Symmetry C18 Trap Column, 100Å, 5 µm, 180 µm x 20 mm, 2G, V/M, 1/pkg

Part Number: 186007496

ACQUITY UPLC M-Class Columns are designed for optimal performance for nano- to micro scale liquid chromatographic separation, offering the highest possible sensitivity, resolution and reproducibility for biomarker discovery and protein identification and characterization. The 300µm ID columns are built utilizing a ultra low dispersion column design and offer the same simplicity of use as more traditional columns. Like all M-Class columns they withstand 15kpsi operating pressure and handle pressure fluctuations during injection extremely well and thus provide superior longevity. In order to achieve maximum performance, it is important to ensure that proper connections are made to minimize peak tailing and poor efficiency. This specific offering contains Waters patented BEH Technology 130A pore, C18, 1.7um particles. Each batch is specifically QC tested using a gradient separation of a tryptic digest of cytochrome c to before being QC accepted as a Peptide separation column.

186007496 - ACQUITY UPLC M-Class Symmetry C18 Trap Column, 100Å, 5 µm, 180 µm x 20 mm, 2G, V/M, 1/pkg
Part Number: 186007496
Brand: ACQUITY UPLC M-Class

Products > Chromatography Consumables & Columns > Columns
% Carbon Load 18
Chemistry C18
Endcapped Yes
Format Trap Column
ID 180 µm
Length (mm) 20 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System Nano/Micro
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186000272C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 2 mL Volume, 100/pkg

Part Number: 186000272C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

186000272C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 2 mL Volume, 100/pkg
Part Number: 186000272C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Bruker
Dynatech
Finnigan
Fisons
Gilson
Hitachi
L.E.A.P.
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2695
Waters 2795
Certified LCGC Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Clear Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 2 mL

info

WAT026-04 - PEEK Union, 1/16 in.

Part Number: WAT026-04

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which can damage valves and block columns, thereby increasing maintenance costs.

WAT026-04 - PEEK Union, 1/16 in.
Part Number: WAT026-04
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT084040 - µBondapak Amino (NH2) Column, 125Å, 10 µm, 3.9 mm X 300 mm, 1/pkg

Part Number: WAT084040

If your method calls for µBondapak packings, there is only one µBondapak packing material. Many companies claim to have columns with µBondapak-like selectivity but not one has ever passed Waters stringent QC batch test. Waters set the standard for reproducible, high-performance chromatographic columns. Waters µBondapak columns are still the most widely referenced and requested columns in the world.

WAT084040 - µBondapak Amino (NH2) Column, 125Å, 10 µm, 3.9 mm X 300 mm, 1/pkg
Part Number: WAT084040
Brand: µBondapak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4
Chemistry Amino (NH2)
Endcapped No
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 300 mm
Mode Normal-Phase
Particle Shape Irregular
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 125Å
Silanol Activity High
Surface Area 330
USP Classification L8
Units in Package 1/pkg
pH Range 2 - 8

info

186007081 - Waters Ammonium Formate Solution – Glycan Analysis

Part Number: 186007081

This is a concentrated version of the 50mM Ammonium Formate buffer that is recommended to be used with the Biopharm/Glycan system, using the UPLC H-class and the ACQUITY UPLC BEH Glycan Column. This buffer contains 10ml of 5050 mM Ammonium Formate in a Water w/ 3.8% Formic acid matrix. This allows the end user to directly pour the concentrate into a 1L bottle of LCMS grade water for the correct concentration of 50 mM at a pH of 4.4.

186007081 - Waters Ammonium Formate Solution – Glycan Analysis
Part Number: 186007081
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector Fluorescence (FLR)
Product Type Mobile Phase
Shipping Formulation Liquid
Storage Refrigerator 2 to 8 C
System LC -RI, FLR, Conductivity, Electrochemical

info

186000132 - Oasis HLB Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk

Part Number: 186000132

Oasis HLB Plus Short cartridges contain the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent for extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These versatile Plus-short cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.

186000132 - Oasis HLB Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk
Part Number: 186000132
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry HLB
Format/Type Plus Short Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 225 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

WAT073571 - Rheodyne, Prep Injector Valve

Part Number: WAT073571

This spare part is part of the Preparative Chromatography Rack for the 25X5 series of pumps.

WAT073571 - Rheodyne, Prep Injector Valve
Part Number: WAT073571
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category Injectors
Pumps
Products 2545 Quaternary Gradient Pump
FlexInject Manual Dual Injector Module
Rheodyne Injector
Replacement Schedule As Needed

info

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg

Part Number: WAT022479

These vials with come pre-assembled for use in dissolution systems.

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg
Part Number: WAT022479
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Clear Glass
Units in Package 500/pkg
Volume Capacity 1 mL

info

PSS832715 - Spherisorb SAX Column, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: PSS832715

Spherisorb SAX columns contain a silica-based quaternary ammonium bonded sorbent. The column is listed as USP L14 and is used for anion-exchange separations.

PSS832715 - Spherisorb SAX Column, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: PSS832715
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4
Chemistry SAX
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Ion-Exchange
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L14
Units in Package 1/pkg
pH Range 2 - 8

info

WAT010025 - Nova-Pak Silica Column, 60Å, 4 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: WAT010025

Nova-Pak Silica columns are general purpose, normal-phase columns that are based on 4 µm particle technology. Compared to a 5 µm column, Nova-Pak columns offer higher resolution, more efficient separations, and faster chromatography.

WAT010025 - Nova-Pak Silica Column, 60Å, 4 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT010025
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Silica
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Normal-Phase
Particle Shape Spherical
Particle Size (dp) 4 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity High
Surface Area 120
System HPLC
USP Classification L3
Units in Package 1/pkg
pH Range 2 - 8

info

186001830BA - Oasis MCX 96-well µElution Plate, 2 mg Sorbent per Well, 30 µm Particle Size, 1/pk

Part Number: 186001830BA

The patented 96-well Oasis MCX µElution plate is designed for SPE cleanup and analyte enrichment of sample volumes ranging from 10 ?L to 375 ?L. Each well of the µElution plate contains 2 mg of the Oasis MCX sorbent, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. The innovative features of Oasis ?Elution plate enabled elution in only 25 ?L, resulting in sensitive, robust, reproducible results without evaporation and reconstitution. A 15-fold sample enrichment is possible with this plate. The Oasis MCX µElution plate is compatible with most liquid-handling robotic systems for automated, high throughput SPE.

186001830BA - Oasis MCX 96-well µElution Plate, 2 mg Sorbent per Well, 30 µm Particle Size, 1/pk
Part Number: 186001830BA
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry MCX
Format/Type 96-well µElution Plate
Ion Exch. Capacity 1 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 2 mg
Units In Package 1/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

600000671CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 1 mL Volume, 100/pkg

Part Number: 600000671CV

All Waters LCMS Certified vials are produced following tightly controlled manufacturing processes and handling procedures. They are tested with mass spectrometers and come packaged with a certificate of analysis showing the reference and vial scan for the manufacturing lot.

600000671CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 1 mL Volume, 100/pkg
Part Number: 600000671CV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2695
Certified LCMS Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Total Recovery Vial
GlassType Clear Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 1 mL

info

186004775 - XSelect HSS C18 Column, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: 186004775

The HSS C18 is a general-purpose C18 bonded phase column that provides superior peak shape for bases, increased retention (vs. XBridge C18 columns), and exceptional column lifetimes at low pH. The selectivity and retention observed with HSS C18 columns will resemble that of most modern, fully endcapped, high-coverage silica-based C18 columns.

186004775 - XSelect HSS C18 Column, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: 186004775
Brand: XSelect

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 230
System HPLC
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 8

info

186007609 - Torus DIOL Column, 130Å, 1.7 µm, 3 mm X 50 mm, 1/pkg

Part Number: 186007609

ACQUITY UPC2 Torus Columns are specifically designed to use the complete range of capabilities of the ACQUITY UPC2 System to achieve fast, robust achiral separations. ACQUITY UPC2 Torus Columns simplify the method development process with four completely new and innovative 1.7 ?m chemistries for convergence chromatography. These columns are designed for excellent peak shape that eliminate or reduce the need for additives, and offer added selectivity for a wide range of compounds and improved robustness.

186007609 - Torus DIOL Column, 130Å, 1.7 µm, 3 mm X 50 mm, 1/pkg
Part Number: 186007609
Brand: Torus

Products > Chromatography Consumables & Columns > Columns > SFC Columns
Chemistry DIOL
Endfitting Type Parker-style
Format Column
ID 3 mm
Length (mm) 50 mm
Mode SuperCritical Fluid (SFC)
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
Surface Area 185
System UPC2/SFC
Units in Package 1/pkg

info

700001236 - Cone Gas Nozzle

Part Number: 700001236

This spare part is a Waters Quality part.

700001236 - Cone Gas Nozzle
Part Number: 700001236
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
LCT Premier
LCT Premier XE
Quattro micro Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed
sparepartsystemscategory LCMS

info

700000435 - 6 Column Select Valve

Part Number: 700000435

The 6-Column Selection Valve is a 6-position, 14-port valve. You can select one of 6 columns at a time, and you can dedicate one of the 6 column positions to bypass or waste. The 6-column selection valve requires two additional column clips to be installed. Slots are provided in the front of the column heater to hold tubing in place.

700000435 - 6 Column Select Valve
Part Number: 700000435
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule No

info

186000480 - XTerra Shield RP18 Column, 125Å, 5 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: 186000480

XTerra RP18 columns are general purpose, hybrid-based, reversed-phase C18 columns that incorporate Waters patented embedded polar group technology to improve peak shape performance for highly basic compounds. These first generation columns provide superior pH stabil?ity compared to a silica-based column.

186000480 - XTerra Shield RP18 Column, 125Å, 5 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: 186000480
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15
Bonding Technology Shield RP18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 12

info

186000486 - XTerra MS C18 Column, 125Å, 5 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: 186000486

XTerra MS C18 columns are general purpose, hybrid-based, reversed-phase C18 columns that are designed to be compatible with mass spectrometry applications. These first generation columns provide superior pH stability compared to a silica-based column.

186000486 - XTerra MS C18 Column, 125Å, 5 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: 186000486
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15.5
Bonding Technology MS C18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

186004802 - ACQUITY UPLC BEH Amide Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: 186004802

ACQUITY BEH Amide columns retain extremely polar compounds, including carbohydrates and sugars. Based on BEH technology the ACQUITY Amide columns offer a chemically stable, trifunctionally bonded amide phase that is stable from pH 2 to 12 to enable the separation of polar analytes that span a wide range of polarity, structural moiety and pKa.

186004802 - ACQUITY UPLC BEH Amide Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: 186004802
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 12
Chemistry Amide
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Hydrophilic Interaction (HILIC)
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
Surface Area 185
System UPLC/UHPLC
Technology BEH
Units in Package 1/pkg
pH Range 2 - 11

info

WAT085250 - Protein-Pak SEC Column, 60Å, 10 µm, 7.8 mm X 300 mm, 500 - 20K, 1/pkg

Part Number: WAT085250

10 µm diol-bonded gel filtration materials.

WAT085250 - Protein-Pak SEC Column, 60Å, 10 µm, 7.8 mm X 300 mm, 500 - 20K, 1/pkg
Part Number: WAT085250
Brand: Protein-Pak

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Protein-Pak Columns
Application Peptide
Protein
Chemistry SEC
Endfitting Type Waters
Format Column
ID 7.8 mm
Length (mm) 300 mm
Mode SEC/GPC
Molecular Weight Range 500 - 20K
Particle Shape Spherical
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 60Å
USP Classification L20
Units in Package 1/pkg
pH Range 2 - 8

info

WAT025746 - Reference Valve Rebuild Kit

Part Number: WAT025746

This Reference Valve Rebuild Kit is a simple, cost-effective means for maintaining the reference valve that may have been added as an accessory to your Waters® pump. The kit provides all necessary parts and instructions to rebuild the reference valve and contains a diaphragm, actuator, and comprehensive instructions. The valve should be replaced or rebuilt every 12 months.

WAT025746 - Reference Valve Rebuild Kit
Part Number: WAT025746
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
Replacement Schedule Annually

info

186000327C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 186000327C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

186000327C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 186000327C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
L.E.A.P.
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2795
Waters Acquity
Certified LCGC Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Max Recovery Vial
GlassType Clear Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL