Product Listing:  WAT270944 - 2690/95 PERFORMANCE MAINTENANCE KIT   to   186007949 - VanGuard Cartridge Holder, 1/pkg

Sorted by Best Sellers
  Product    
info

WAT270944 - 2690/95 PERFORMANCE MAINTENANCE KIT

Part Number: WAT270944

The Waters® Performance Maintenance Kit for the 2690 Separations Module contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: one diffuser assembly, one filter insert assembly, four stainless steel solvent filters, four face seals, 2 fluoroloy seals, one syringe, one compression screw, one sealwash injector tube, one needlewash frit, five sealwash tubes, two seals, one spacer, two plungers, one teflon washer, two plunger seal wash, one lithium battery, one needle wash filter, one filter retainer, thin walled teflon tubing, two check valve cartridge assemblies, powder-free gloves, one injector needle and one injector needle ferrule.

WAT270944 - 2690/95 PERFORMANCE MAINTENANCE KIT
Part Number: WAT270944
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
Replacement Schedule Annually

info

186000254 - Oasis MCX 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk

Part Number: 186000254

The 3 cc Oasis MCX cartridges contain the Oasis MCX, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. Since the Oasis MCX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186000254 - Oasis MCX 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk
Part Number: 186000254
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry MCX
Format/Type Vac Cartridge
Ion Exch. Capacity 1 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 60 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info WAT201549 - Insulin HMWP SEC Column, 125Å, 10 µm, 7.8 mm X 300 mm, 5K - 150K, 1/pkg
Part Number: WAT201549
Brand: Insulin HMWP

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Peptide Separations
Chemistry SEC
Endfitting Type Waters
Format Column
ID 7.8 mm
Length (mm) 300 mm
Mode Gel Filtration (aqueous)
Molecular Weight Range 5K - 150K
Particle Shape Irregular
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 125Å
USP Classification L20
Units in Package 1/pkg
pH Range 2 - 8

info

700001012 - PEEK Tubing Cutter

Part Number: 700001012

The PEEK Tubing Cutter makes clean, perpendicular cuts without collapsing thin capillary walls. Each one has guide holes to ensure precise cutting. This cutter is easy to use, durable and reliable.

700001012 - PEEK Tubing Cutter
Part Number: 700001012
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category ACQUITY
Capillary LC
Products ACQUITY UPLC PDA Detector
ACQUITY UPLC 2996 PDA Detector
ACQUITY UPLC Column Heater/Cooler
ACQUITY UPLC Column Manager
ACQUITY UPLC TUV Detector
CapLC 2487
CapLC 2996
CapLC System
CapLC XE System
Replacement Schedule No

info

186000132 - Oasis HLB Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk

Part Number: 186000132

Oasis HLB Plus Short cartridges contain the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent for extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These versatile Plus-short cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.

186000132 - Oasis HLB Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk
Part Number: 186000132
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry HLB
Format/Type Plus Short Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 225 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

M880675CD1-S - Target Plate, MALDI

Part Number: M880675CD1-S

This Target plate is used in the Q-Tof Premier MALDI, the Q-Tof Ultima MALDI, and the MALDI SYNAPT HDMS/MS Systems.

M880675CD1-S - Target Plate, MALDI
Part Number: M880675CD1-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Mass Spectrometry
Products MALDI LR Mass Spectometer
MALDI SYNAPT HDMS Mass Spectrometer
MALDI SYNAPT MS Mass Spectrometer
MALDI micro MX Mass Spectrometer
Q-Tof Premier MALDI Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Replacement Schedule As Needed

info

WAT073109 - Syringe, 250µL (Standard)

Part Number: WAT073109

This autosampler syringe is manufactured with tight specifications in barrel size, shape, and wall smoothness for maximum accuracy and consistency in injection volume. The syringe features a plunger seal that is designed specifically for the Waters autosampler, and a top seal made of a unique material that ensures a reliable seal in the manifold and a leak-free connection. This syringe is used in Waters 717 Autosampler and in the 2690/2695, 2690D/2695D Separations Module, as well as the LC Module 1 system.

WAT073109 - Syringe, 250µL (Standard)
Part Number: WAT073109
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
LC Module 1

info

700003557 - Actuator Assembly

Part Number: 700003557

The Actuator Assembly is part of the Intelligent Intake Valve that is used in the ACQUITY Binary Solvent Manager and the ACQUITY I-Class BSM.

700003557 - Actuator Assembly
Part Number: 700003557
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category ACQUITY
Products ACQUITY I-Class BSM
ACQUITY UPLC I2V Binary Solvent Manager
Replacement Schedule As Needed

info

700002333 - Check Valve, Ceramic, 1.75, 2/pkg

Part Number: 700002333

This spare part is a Waters Quality part

700002333 - Check Valve, Ceramic, 1.75, 2/pkg
Part Number: 700002333
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Separations Module
Products 1525 HPLC Pump
2695 Separations Module
2695D Dissolution Separations Module
2795 Separations Module
515 HPLC Pump
600 MultiSolvent Delivery System
Replacement Schedule As Needed

info

186001344 - Atlantis dc18 Column, 100Å, 5 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: 186001344

Atlantis dC18 columns are universal, silica-based, reversed-phase C18 columns that are used for polar compound retention. The Atlantis dC18 columns feature di-functionally bonded C18 ligands that have been optimized for use with highly aqueous mobile phases, including 100% water.

186001344 - Atlantis dc18 Column, 100Å, 5 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: 186001344
Brand: Atlantis

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 12
Bonding Technology dc18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 330
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 3 - 7

info

WAT084189 - PIC A Low UV Reagent

Part Number: WAT084189

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC A Low UV is 5 vials/pkg of tertrabutylammonium hydrogen sulfate in a workable UV range in mobile phase 200+ nm.

WAT084189 - PIC A Low UV Reagent
Part Number: WAT084189
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

186000438 - XTerra Shield RP18 Column, 125Å, 3.5 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: 186000438

XTerra RP18 columns are general purpose, hybrid-based, reversed-phase C18 columns that incorporate Waters patented embedded polar group technology to improve peak shape performance for highly basic compounds. These first generation columns provide superior pH stabil?ity compared to a silica-based column.

186000438 - XTerra Shield RP18 Column, 125Å, 3.5 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: 186000438
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15
Bonding Technology Shield RP18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 12

info

WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg

Part Number: WAT271018

Integral to the 2690 and 2790 Separations Modules, these seals are part of the seal wash system and help ensure that plunger seal life is maximized.

WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg
Part Number: WAT271018
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems

info

700003563 - Assy., Cartridge, Intelligent Vlv, 2/pkg

Part Number: 700003563

This cartridge assembly is part of the Intelligent Intake Vale found on the ACQUITY Binary Solvent Manager.

700003563 - Assy., Cartridge, Intelligent Vlv, 2/pkg
Part Number: 700003563
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category ACQUITY
Products ACQUITY I-Class BSM
ACQUITY UPLC I2V Binary Solvent Manager
Replacement Schedule As Needed

info

700004206 - Capillary Tube

Part Number: 700004206

This spare part is a Waters Quality part

700004206 - Capillary Tube
Part Number: 700004206
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Xevo™ TQ MS
Replacement Schedule As Needed

info

186008100 - Glycoworks Rapid Buffer, 5ml

Part Number: 186008100

The Glycoworks Rapid Buffer, 5ml is a supplemental part number for customers using the GlycoWorks RapiFluor-MS N-Glycan-96 and -24 sample kits. It is a concentrated, bulk solution of the customized rapid buffer used in the suggested deglycosylation method, This buffer is provided for customers who need to do buffer exchange before running their samples with the kit.

186008100 - Glycoworks Rapid Buffer, 5ml
Part Number: 186008100
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Column Chemistry HILIC
Detector Fluorescence (FLR)
Packaging 1/pkg
Product Type Reagent
Shipping Formulation Liquid
Storage Refrigerator 2 to 8 C
System LC/MS

info

WAT022934 - Clear-100™ Plunger Seal

Part Number: WAT022934

Made from a proprietary material, the Clear-100™ Plunger Seals feature an internal spring that provides the correct pressure on the plunger, increasing the life of the sapphire and the seal itself. The Clear-100™ Seal features an exclusive ringed or ribbed design on the inside of the seal, which helps to maintain a snug fit and increases the seal’s durability. The Clear-100™ Seal is best suited to most applications for Waters® Solvent Delivery Systems. It is included in Performance Maintenance Kits.

WAT022934 - Clear-100™ Plunger Seal
Part Number: WAT022934
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Systems
Products 1515 HPLC Pump
1525 HPLC Pump
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1
Replacement Schedule As Needed

info

WAT043395 - Sep-Pak C18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 30/pk

Part Number: WAT043395

Silica-based octadecyl bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages.

WAT043395 - Sep-Pak C18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 30/pk
Part Number: WAT043395
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186003838 - AccQ-Tag Ultra Eluent A

Part Number: 186003838

AccQ•Tag Ultra Chemistry is based on the versatile and proven AccQ•Tag Method— the leading chemistry solution for amino acid analysis and is specifically designed for accurate, high sensitivity UPLC analyses. AccQ•Tag Ultra utilizes the AccQ•Fluor™ Reagent to quickly and easily derivatize both primary and secondary amino acids in a single step to generate unparalleled quantitative results. The AccQ•Tag Ultra Chemistry Package is a comprehensive, fully-tested set of reagents, column and eluents including extensive documentation.

186003838 - AccQ-Tag Ultra Eluent A
Part Number: 186003838
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Eluent
Shipping Formulation Liquid
Storage Room temp
System UPLC

info

186000384C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, with Cap and PTFE/silicone Septum , 1 mL Volume, 100/pkg

Part Number: 186000384C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

186000384C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, with Cap and PTFE/silicone Septum , 1 mL Volume, 100/pkg
Part Number: 186000384C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2695
Certified LCGC Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Total Recovery Vial
GlassType Clear Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 1 mL

info

WAT023590 - Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk

Part Number: WAT023590

Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The Sep-Pak C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023590 - Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk
Part Number: WAT023590
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

PSS833915 - Spherisorb SAX Column, 80Å, 10 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: PSS833915

Spherisorb SAX columns contain a silica-based quaternary ammonium bonded sorbent. The column is listed as USP L14 and is used for anion-exchange separations.

PSS833915 - Spherisorb SAX Column, 80Å, 10 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: PSS833915
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4
Chemistry SAX
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Ion-Exchange
Particle Shape Spherical
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L14
Units in Package 1/pkg
pH Range 2 - 8

info

186001828BA - Oasis HLB 96-well µElution Plate, 2 mg Sorbent per Well, 30 µm Particle Size, 1/pk

Part Number: 186001828BA

The patented 96-well Oasis HLB µElution plate is designed for SPE cleanup and analyte enrichment of sample volumes ranging from 10 ?L to 375 ?L. Each well of the µElution plate contains 2 mg of the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent for extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. The innovative features of Oasis ?Elution plate enabled elution in only 25 ?L, resulting in sensitive, robust, reproducible results without evaporation and reconstitution. A 15-fold sample enrichment is possible with this plate. The Oasis HLB µElution plate is compatible with most liquid-handling robotic systems for automated, high throughput SPE.

186001828BA - Oasis HLB 96-well µElution Plate, 2 mg Sorbent per Well, 30 µm Particle Size, 1/pk
Part Number: 186001828BA
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry HLB
Format/Type 96-well µElution Plate
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 2 mg
Units In Package 1/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

700002660 - Vent Valve/Trap Valve Cartridge

Part Number: 700002660

This spare part is a Waters Quality part

700002660 - Vent Valve/Trap Valve Cartridge
Part Number: 700002660
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

186003462 - ACQUITY UPLC BEH HILIC Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: 186003462

ACQUITY BEH HILIC columns contain unbonded BEH substrate and are designed to retain and separate very polar compounds. These unique columns are optimized and tested to produce efficient, reproducible separations under HPLC HILIC conditions. More rugged than silica based HILIC phases, the BEH particle’s chemical stability results in long column lifetimes.

186003462 - ACQUITY UPLC BEH HILIC Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: 186003462
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
Chemistry HILIC
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Hydrophilic Interaction (HILIC)
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
Surface Area 185
System UPLC/UHPLC
Technology BEH
USP Classification L3
Units in Package 1/pkg
pH Range 1 - 9

info

WAT084560 - Inline Precolumn Filter Kit

Part Number: WAT084560

The In-Line Precolumn Filter is a 2µm filter that is placed before the column to help extend the life and preserve the chemistry of the column.

WAT084560 - Inline Precolumn Filter Kit
Part Number: WAT084560
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Systems
Products LC Module 1
Replacement Schedule As Needed

info

186004021 - XBridge BEH C18 OBD Prep Column, 130Å, 5 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186004021

As a workhorse for HPLC method development, XBridge BEH C18 sorbent can be used over an entire range of mobile phase pH (1-12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed.

186004021 - XBridge BEH C18 OBD Prep Column, 130Å, 5 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186004021
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 18
Chemistry C18
Endcapped Yes
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System HPLC
Technology BEH
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

WAT271019 - Seal Pack Rebuild Kit w/Needle

Part Number: WAT271019

The Seal Pack Rebuild Kit includes all of the parts necessary to replace seals in the seal body, including the high pressure seals. Replacement of these seals requires use of HPMV Tool Kit (WAT045427). The Rebuild Kit includes: one Teflon washer, one needlewash filter, one upper spacer, one lower spacer, one alignment tube, one wash tube seal, one needle, two high pressure seals, one compression screw, and one ferrule.

WAT271019 - Seal Pack Rebuild Kit w/Needle
Part Number: WAT271019
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

WAT026770 - IC-Pak Anion HC Column, 4.6 x 150 mm

Part Number: WAT026770

Waters offers an array of products for ion chromatography . IC-Pak resin based columns allow you to analyze a full range of ions from numerous sample matrices, both simple and complex. They offer an exceptional linear loading range of less than 1.0 ppb to greater than 400 ppm without dilution and without pH limitation on eluent or sample. The flexibility exists for accurate and reproducible anion and cation analyses at all concentration levels.

WAT026770 - IC-Pak Anion HC Column, 4.6 x 150 mm
Part Number: WAT026770
Brand: IC-Pak HC

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Anion-exchange
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Ion-Exchange
Particle Size (dp) 10 µm
Units in Package 1/pkg

info

186007949 - VanGuard Cartridge Holder, 1/pkg

Part Number: 186007949

The Vanguard Cartidge Holder is designed to be used with all 2.1 mm x 5 mm and 3.9 mm x 5 mm VanGuard Cartridges.

186007949 - VanGuard Cartridge Holder, 1/pkg
Part Number: 186007949
Products > Chromatography Consumables & Columns
Endfitting Type Direct-Connect
Format VanGuard Cartridge Holder
Units in Package 1/pkg