Product Listing:  186003054 - XBridge BEH C8 Column, 130Å, 3.5 µm, 4.6 mm X 100 mm, 1/pkg   to   430001572 - Tube, ASM to MS, 25µm x 60in.

Sorted by Best Sellers
  Product    
info

186003054 - XBridge BEH C8 Column, 130Å, 3.5 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: 186003054

The XBridge BEH C8 sorbent is less retentive compared to the XBridge BEH C18 sorbent. Anyone developing methods may prefer the speed offered by a less retentive column, while improving peak shape and chromatographic performance. The trifunctionally bonded sorbent offers you the widest usable pH range (1-12), superior low pH stability, and ultra-low column bleed.

186003054 - XBridge BEH C8 Column, 130Å, 3.5 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: 186003054
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 13
Chemistry C8
Endcapped Yes
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System HPLC
Technology BEH
USP Classification L7
Units in Package 1/pkg
pH Range 1 - 12

info

M960287AD1 - Slit Plate, 0.25mm Slit

Part Number: M960287AD1

Slit Plate Support for Outer Source Assembly, St. Stl.

M960287AD1 - Slit Plate, 0.25mm Slit
Part Number: M960287AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products GCT Mass Spectrometer
GCT Premier Mass Spectrometer
Replacement Schedule As Needed

info

186001260 - Waters PAH C18 Column, 120Å, 3 µm, 4.6 mm X 50 mm, 1/pkg

Part Number: 186001260

Polyaromatic hydrocarbons (PAHs) are among the most frequently monitored environmental contaminants. Standard and official methods for the analysis of PAHs are found in compendia for air, drinking water, wastewater, solid waste, and food analysis. Many of these methods specify HPLC, usually with UV and fluorescence detection, as the recommended analytical procedure. Introducing, from Waters Corporation, world leaders in HPLC and LCMS, the best column for HPLC analysis of PAHs, Waters PAH Column.

186001260 - Waters PAH C18 Column, 120Å, 3 µm, 4.6 mm X 50 mm, 1/pkg
Part Number: 186001260
Brand: Waters PAH

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry C18
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3 µm
Particle Substrate Silica
Pore Size 120Å
Units in Package 1/pkg
pH Range 2 - 8

info

WAT060328 - Bourdon Tube Transducer

Part Number: WAT060328

The transducer measures system pressure. Unlike many other parts vendors, Waters® uses only new Bourdon tube transducers and does not refurbish nor rebuild failed units. This ensures delivery of a transducer that is high in quality, reliability, and life span.

WAT060328 - Bourdon Tube Transducer
Part Number: WAT060328
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Pumps
Products 510 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump

info

WAT007355 - IC-Pak Anion Column, 10 µm, 4.6 x 50 mm

Part Number: WAT007355

Waters offers an array of products for ion chromatography . IC-Pak resin based columns allow you to analyze a full range of ions from numerous sample matrices, both simple and complex. They offer an exceptional linear loading range of less than 1.0 ppb to greater than 400 ppm without dilution and without pH limitation on eluent or sample. The flexibility exists for accurate and reproducible anion and cation analyses at all concentration levels.

WAT007355 - IC-Pak Anion Column, 10 µm, 4.6 x 50 mm
Part Number: WAT007355
Brand: IC-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Anion-exchange
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Ion-Exchange
Particle Size (dp) 10 µm
Units in Package 1/pkg

info

186004929 - Protein-Pak Hi Res CM, 7µm, 4.6x100 mm, 1/pkg

Part Number: 186004929

Protein-Pak Hi Res Ion-Exchange (IEX) columns were developed to assist in the characterization of recombinant proteins, monoclonal antibodies, and other biological compounds. The non-porous, high compound binding capacity of these particles yields outstanding resolution of charged species in less time compared to use of many traditional porous IEX offerings. In addition, quality control testing with defined protein standards helps ensure consistent batch-to-batch performance.

186004929 - Protein-Pak Hi Res CM, 7µm, 4.6x100 mm, 1/pkg
Part Number: 186004929
Brand: Protein-Pak

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Protein-Pak Columns
Application Peptide
Protein
Chemistry Cation-exchange
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Ion-Exchange
Particle Shape Spherical
Particle Size (dp) 7 µm
Particle Substrate Polymethacrylate
Pore Size Non-porous
Units in Package 1/pkg
pH Range 2 - 11

info

WAT035708 - Polyisoprene Standards Kit

Part Number: WAT035708

A unique collection of 10 GPC standards (Gel Permeation Chromatography standards) for non-aqueous molecular weight determination. Polyisoprene Standard Kit 10 Vials, 0.5g in each vial containing the following moleculare weight standards: 1000, 3000, 10000, 30000, 70000, 100000, 300000, 500000, 1000000, 3000000

WAT035708 - Polyisoprene Standards Kit
Part Number: WAT035708
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Chemical and Environmental Analysis Standards > GPC & GFC Standards
Applications Chemical
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System HPLC -UV

info

PSL613321 - PEEK STARTER KIT (NUTS/FER/FIT)

Part Number: PSL613321

By Replacing stainless steel parts such as tubings, fittings, ferrules, mobile phase filters, in-line filters, etc. you are creating a biocompatible and metallic-free environment for your samples and mobile phase. The PEEK Starter Kit is a collection of items we believe is a good start for everybody working in the field of biochromatography. Each Kit is supplied in a sturdy plastic case. The Kit contains the following items: PEEK Fingertight One-Piece (6), PEEK Handtight Nut (4), PEEK Hex-Head Nut (4), PEEK Double Ferrules (20), PEEK Tubing 1/16 x 0.25mm (1 x 3m), PEEK Tubing 1/16 x 0.50mm (1 x 3m), PEEK Union (1), Elbow 90 Degrees (2), Elbow 180 Degrees (2), Guillotine Cutter (1), PAT™ Mobile Phase Filter - Last Drop (1)

PSL613321 - PEEK STARTER KIT (NUTS/FER/FIT)
Part Number: PSL613321
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category PEEK
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT036975 - Nova-Pak C18 Cartridge, 60Å, 4 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: WAT036975

Nova-Pak C18 columns are general purpose, silica-based, reversed-phase C18 columns that are based on 4 µm particle technology. Compared to a 5 µm column, Nova-Pak columns offer higher resolution, more efficient separations, and faster chromatography.

WAT036975 - Nova-Pak C18 Cartridge, 60Å, 4 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT036975
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 7.3
Chemistry C18
Endcapped Yes
Format Cartridge
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 4 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity Medium
Surface Area 120
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186003055 - XBridge BEH C8 Column, 130Å, 3.5 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: 186003055

The XBridge BEH C8 sorbent is less retentive compared to the XBridge BEH C18 sorbent. Anyone developing methods may prefer the speed offered by a less retentive column, while improving peak shape and chromatographic performance. The trifunctionally bonded sorbent offers you the widest usable pH range (1-12), superior low pH stability, and ultra-low column bleed.

186003055 - XBridge BEH C8 Column, 130Å, 3.5 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: 186003055
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 13
Chemistry C8
Endcapped Yes
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System HPLC
Technology BEH
USP Classification L7
Units in Package 1/pkg
pH Range 1 - 12

info

700001222 - ZQ/ Quattro Micro Source Assembly

Part Number: 700001222

This spare part is a Waters Quality part

700001222 - ZQ/ Quattro Micro Source Assembly
Part Number: 700001222
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule No
sparepartsystemscategory LCMS

info

186001299 - Atlantis dc18 Column, 100Å, 3 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: 186001299

Atlantis dC18 columns are universal, silica-based, reversed-phase C18 columns that are used for polar compound retention. The Atlantis dC18 columns feature di-functionally bonded C18 ligands that have been optimized for use with highly aqueous mobile phases, including 100% water.

186001299 - Atlantis dc18 Column, 100Å, 3 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: 186001299
Brand: Atlantis

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 12
Bonding Technology dc18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Size (dp) 3 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 330
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 3 - 7

info

WAT021902 - AP-1 Glass Column, 10x200 mm, 1/pkg

Part Number: WAT021902

Waters Advanced Purification (AP) glass columns are constructed of biocompatible glass and polymeric materials for use with silica, polymer, or soft gel packings.

WAT021902 - AP-1 Glass Column, 10x200 mm, 1/pkg
Part Number: WAT021902
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 10 mm
Length (mm) 200 mm
Units in Package 1/pkg

info

WAT034245 - Shodex SP-G Guard Column, 8 µm, 6 x 50 mm

Part Number: WAT034245

Shodex® high performance polymeric columns for sugar analysis

WAT034245 - Shodex SP-G Guard Column, 8 µm, 6 x 50 mm
Part Number: WAT034245
Brand: Shodex
Shodex

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Endfitting Type Shodex
Format Guard Column
ID 6 mm
Length (mm) 50 mm
Particle Shape Spherical
Particle Size (dp) 8 µm
Particle Substrate Polymer
Solvent Water
Units in Package 1/pkg
pH Range 2 - 12

info

WAT021817 - Ferrule, 1/16in. OD, PEEK

Part Number: WAT021817

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT021817 - Ferrule, 1/16in. OD, PEEK
Part Number: WAT021817
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Detectors
Injectors
Pumps
Separations Module
Systems
Products 2690D Dissolution Separations Module
2790 Separations Module
626 LC System
996 Photodiode Array Detector
LC Module 1
Rheodyne Injector
Replacement Schedule As Needed

info

700004321 - O-ring, Viton, 10 I/D x 1.5 C/S

Part Number: 700004321

This spare part is a Waters Quality part

700004321 - O-ring, Viton, 10 I/D x 1.5 C/S
Part Number: 700004321
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category O-rings
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
SPECVALUE134881948
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

700004761 - PEEK Tubing

Part Number: 700004761

This spare part is a Waters Quality part

700004761 - PEEK Tubing
Part Number: 700004761
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

430002007 - ASSY, EXTENSION LOOP, 250uL

Part Number: 430002007

This is a 250µL Sample loop used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sample Manager-FTN modules.

430002007 - ASSY, EXTENSION LOOP, 250uL
Part Number: 430002007
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category ACQUITY
Products ACQUITY APC SM-pFTN
ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

186008821 - nanoEase MZ Symmetry C18 Trap Column, 100A, 5 um 180 um x 20mm, 1/pkg

Part Number: 186008821

"Waters nanoEase M/Z Columns are designed for optimal performance for nano- to micro scale liquid chromatographic separation for biomarker discovery and protein and peptide identification and characterization. All nanoLC columns are designed for use up to 15 kpsi (1,000 bar) operating pressure and handle pressure fluctuations during injection extremely well and thus provide superior longevity.The columns are equipped with the ZenFit connector, an easy to use, fingertight, tool free liquid connection. This ensures reproducible, leak free connections. The fittings will fit into Waters V-Detail ports as well as into Rheodyne/Vici compatible valves."

186008821 - nanoEase MZ Symmetry C18 Trap Column, 100A, 5 um 180 um x 20mm, 1/pkg
Part Number: 186008821
Brand: nanoEaze M/Z

Products > Chromatography Consumables & Columns > Columns
% Carbon Load 18
Chemistry C18
Endcapped Yes
Endfitting Type 10-32 for 1/16" male (inlet & outlet)
Format Trap Column
ID 180 µm
Length (mm) 20 mm
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System Nano/Micro
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

430001121 - Tube Assembly, Transducer to Check Valve

Part Number: 430001121

This spare part is a Waters Quality part

430001121 - Tube Assembly, Transducer to Check Valve
Part Number: 430001121
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
nanoACQUITY
Products ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

186000486 - XTerra MS C18 Column, 125Å, 5 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: 186000486

XTerra MS C18 columns are general purpose, hybrid-based, reversed-phase C18 columns that are designed to be compatible with mass spectrometry applications. These first generation columns provide superior pH stability compared to a silica-based column.

186000486 - XTerra MS C18 Column, 125Å, 5 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: 186000486
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15.5
Bonding Technology MS C18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

201000131 - 2475 PERFORMANCE MAINTENANCE KIT

Part Number: 201000131

The Waters® Performance Maintenance Kit for the 2475 Multi-Wavelength Fluorescence Detector contains all the Waters Quality Parts® necessary to keep your 2475 detector operating at peak performance. The kit also contains a detailed maintenance protocol, including calibration and diagnostic tests to ensure proper installation and function.The xenon lamp has a warranty for a lifetime of 2000 hours or 1 year, whichever comes first.

201000131 - 2475 PERFORMANCE MAINTENANCE KIT
Part Number: 201000131
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Detectors
Products 2475 Multi-channel Fluorescence Detector
Replacement Schedule Annually

info

WAT035877 - Nova-Pak C8 Column, 60Å, 4 µm, 3.9 mm X 75 mm, 1/pkg

Part Number: WAT035877

Nova-Pak C8 columns are general purpose, silica-based, reversed-phase C8 columns that are based on 4 µm particle technology. Compared to a 5 µm column, Nova-Pak columns offer higher resolution, more efficient separations, and faster chromatography.

WAT035877 - Nova-Pak C8 Column, 60Å, 4 µm, 3.9 mm X 75 mm, 1/pkg
Part Number: WAT035877
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 75 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 4 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity Medium
Surface Area 120
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 8

info

700007286 - Fitting, 1/4-28 U PEEK Bulkhead Union

Part Number: 700007286

This spare part is a Waters Quality part

700007286 - Fitting, 1/4-28 U PEEK Bulkhead Union
Part Number: 700007286
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category SFC
Products Fluid Delivery Module (FDM-10)
Fluid Delivery Module (FDM-30)
Replacement Schedule As Needed

info

186003556 - ACQUITY UPLC Peptide BEH C18 Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: 186003556

The ACQUITY BEH130 C18 Peptide Separation Technology (PST) columns have been specially optimized and QC tested for peptide separations. The small-pore (130Å) trifunctionally bonded BEH particle offers the widest usable pH range, superior low pH stability, and ultra-low column bleed to assay samples for proteomics, protein characterization, and peptide synthesis.

186003556 - ACQUITY UPLC Peptide BEH C18 Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: 186003556
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 18
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
QC Tested Peptide
Silanol Activity Low
Surface Area 185
System UPLC/UHPLC
Technology BEH
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

700001198 - ZQ/ Quattro Micro Ion Block Assembly

Part Number: 700001198

Ion Block Assembly containing the sample cone, cone gas cone, extraction lens and o-ring.

700001198 - ZQ/ Quattro Micro Ion Block Assembly
Part Number: 700001198
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
Quattro micro Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule No
sparepartsystemscategory LCMS

info

186005298 - ACQUITY UPLC CSH C18 Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: 186005298

ACQUITY CSH C18 columns were designed to provide alternate selectivity compared to other reversed-phase UPLC columns. These ultra-efficient columns overcome peak shape asymmetry and poor loading capacity for basic compounds, column bleed, and rapid mobile-phase re-equilibration.

186005298 - ACQUITY UPLC CSH C18 Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: 186005298
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 15
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System UPLC/UHPLC
Technology CSH
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 11

info

176001235 - AccQ-Tag Ultra Chemistry Kit

Part Number: 176001235

Amino Acid Analysis (AAA) is required for many applications. Refill Package. The refill Kit is intended to recharge the AccQTag Ultra chemistries that are a part of the Application Add on kit. This kit should not be purchased as part of an initial system. Includes AccQTag Ultra Deriviativation Kit 250 analyses 186003836, AccQTag Ultra Column 2.1 X 100mm 186003837, AccQTag Eluent A Concentrate (950mL) 186003838, AccQTag Ultra Eluent B (950mL) 186003839, Sample Tubes, 4 X 72pkg WAT007571, Amino Acid Standard, Hydrolyste, 10 X 1mL ampules WAT088122, Tota Recovery Vials, 3 X 100 vial/pkg 186000384C

176001235 - AccQ-Tag Ultra Chemistry Kit
Part Number: 176001235
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Kit
Shipping Formulation Liquid
Storage Refrigerator 2 to 8 C
System UPLC

info

700001318 - Needlewash Frit, 5/pkg

Part Number: 700001318

This is the lower seal wash frit for the needlewash that sits between the lower seal wash body and the filter retainer. There are 5 frits in this package.

700001318 - Needlewash Frit, 5/pkg
Part Number: 700001318
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Products 2695 Separations Module
2695D Dissolution Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

430001572 - Tube, ASM to MS, 25µm x 60in.

Part Number: 430001572

The ASM to MS tube that is 25µm x 60in. fits into the 10,000psi nanoACQUITY System.

430001572 - Tube, ASM to MS, 25µm x 60in.
Part Number: 430001572
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category nanoACQUITY
Products High Pressure nanoACQUITY UPLC Binary Solvent Manager/Auxillary Solvent Manager
Replacement Schedule As Needed