Product Listing:  176001744 - PFC Analysis Kit   to   PSS830815 - Spherisorb Phenyl Column, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg

Sorted by Best Sellers
  Product    
info

176001744 - PFC Analysis Kit

Part Number: 176001744

Waters ACQUITY UPLC total solution for the analysis of Perfluorinated Compounds (PFCs). The kit contains ACQUITY BEH C18 column, PFC isolator column, and other PFCs-free components optimized for use with the ACQUITY system. Sample preparation consumables such as Oasis HLB cartridges, PFC calibration standards, PFC unknown QC standards, and sample vials are also included.

176001744 - PFC Analysis Kit
Part Number: 176001744
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Format Column Kit

info

186002682 - SunFire C18 Sentry Guard Cartridge, 100Å, 3.5 µm, 4.6 mm X 20 mm, 2/pkg

Part Number: 186002682

SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

186002682 - SunFire C18 Sentry Guard Cartridge, 100Å, 3.5 µm, 4.6 mm X 20 mm, 2/pkg
Part Number: 186002682
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 16
Chemistry C18
Endcapped Yes
Format Sentry Guard Cartridge
ID 4.6 mm
Length (mm) 20 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 340
System HPLC
USP Classification L1
Units in Package 2/pkg
pH Range 2 - 8

info

186005660CV - TruView LCMS Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 2 mL Volume, 100/pkg

Part Number: 186005660CV

TruView LCMS Certified vials are produced following tightly controlled manufacturing processes and handling procedures. They are tested for cleanliness by mass spectrometers and for low analyte adsorption by ACQUITY/MS/MS.

186005660CV - TruView LCMS Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 2 mL Volume, 100/pkg
Part Number: 186005660CV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Certified TruView LCMS Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Clear Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 2 mL

info

205000401 - 2998 Semi-Preparative Flow Cell Kit

Part Number: 205000401

This spare part is a Waters Quality part

205000401 - 2998 Semi-Preparative Flow Cell Kit
Part Number: 205000401
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2998 Photodiode Array Detector
Replacement Schedule As Needed

info

186007375 - CORTECS C18 Column, 90Å, 2.7 µm, 4.6 mm X 50 mm, 1/pkg

Part Number: 186007375

CORTECS C18 Columns are general purpose, high-efficiency columns based on a solid-core particle that offer balanced retention of acids, bases and neutrals at low and mid-range pH.

186007375 - CORTECS C18 Column, 90Å, 2.7 µm, 4.6 mm X 50 mm, 1/pkg
Part Number: 186007375
Brand: CORTECS

Products > Chromatography Consumables & Columns
% Carbon Load 6.6
Chemistry C18
Endcapped Yes
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.7 µm
Particle Substrate Solid-Core
Pore Size 90Å
Silanol Activity Low
Surface Area 100
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

205000726 - Extension Arm Kit

Part Number: 205000726

ACQUITY Extension Arm Kit for CHA H-Class and I-Class for MS

205000726 - Extension Arm Kit
Part Number: 205000726
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY H-Class Column Heater-Active
Replacement Schedule As Needed

info

WAT044231 - Styragel Column, HR 0.5, 5 µm, 7.8 mm X 300 mm, 0 - 1K, THF , 1/pkg

Part Number: WAT044231

Styragel HR columns are high-resolution GPC columns packed with 5 µm particles and are ideal for characterizing samples in the low to mid molecular range where high resolution is critical.

WAT044231 - Styragel Column, HR 0.5, 5 µm, 7.8 mm X 300 mm, 0 - 1K, THF , 1/pkg
Part Number: WAT044231
Brand: Styragel
Styragel® GPC

Products > Chromatography Consumables & Columns > GPC & SEC Columns > GPC & SEC Columns
Endfitting Type Waters
Format Column
ID 7.8 mm
Length (mm) 300 mm
Mode SEC/GPC
Molecular Weight Range 0 - 1K
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Polymer
Pore Size HR 0.5
Solvent THF
Units in Package 1/pkg
pH Range 2 - 12

info

201000102 - REAGENT MANAGER PERFORMANCE MAINTENACE KIT

Part Number: 201000102

The Waters® Performance Maintenance Kit for the Reagent Manager contains all the Waters Quality Parts® necessary to keep your Reagent Manager operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Piston Seal Kit, Seal Flush Diaphragm, two filters, two Filter elements, four Check Valve Capsules and two 2µm Inline Filters.

201000102 - REAGENT MANAGER PERFORMANCE MAINTENACE KIT
Part Number: 201000102
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Pumps
Products Reagent Manager
Replacement Schedule Annually

info

186003886C - LCGC Certified Amber Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 186003886C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

186003886C - LCGC Certified Amber Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 186003886C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
L.E.A.P.
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2795
Certified LCGC Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Max Recovery Vial
GlassType Amber Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL

info

6436004-S1 - 1/16in. x 0.007in PEEK Tube

Part Number: 6436004-S1

5M Yellow PEEK Tubing

6436004-S1 - 1/16in. x 0.007in PEEK Tube
Part Number: 6436004-S1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
LCT Mass Spectrometer
LCT Premier
LCT Premier XE
Platform LCZ Mass Detector
Q-Tof II Mass Spectrometer
Q-Tof 1 Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof Premier Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro Mass Spectrometer
SYNAPT™ MS
Synapt High Definition MS System™
Xevo Q-Tof Mass Spec
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed

info

700002775 - Kit, Frit and Nut, 0.2µm, 2.1mm, 5/pkg

Part Number: 700002775

Part number 700002775 contains five 0.2µm stainless steel replacement filters and five replacement inlet nuts and are used in conjunction with the ACQUITY UPLC™column in-line filter unit (Part Number 205000343)

700002775 - Kit, Frit and Nut, 0.2µm, 2.1mm, 5/pkg
Part Number: 700002775
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY UPLC High Temperature Column Heater
ACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

186007034 - GlycoWorks 2-AB Labeling Reagent Kit

Part Number: 186007034

The GlycoWorks Reagent Kit is an inclusive kit that provides reagents needed to follow the GlycoWorks High-throughput or Single Use Kit protocols. When purchasing the 176 kit part numbers this kit is included but can also be purchased separately.

186007034 - GlycoWorks 2-AB Labeling Reagent Kit
Part Number: 186007034
Brand: GlycoWorks

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Column Chemistry HILIC
Detector Fluorescence (FLR)
Packaging Kit
Product Type Kit
Shipping Formulation Liquid & Solid
Storage Room temp
System LC/MS

info

700008893 - ToF G2-S Standard Ki Kit - 3

Part Number: 700008893

Standards Kit for the verification of system performance for Tof G2-S Contains: Standard 1: 2 vials of 2.5 mg D(+)-Raffinose, Standard 2: 5 vials of 10 mg Matrix (? - Cyano-4-hydroxycinnamic acid), Standard 3 2 mL of formic Acid, Standard 4: 3 mL Aqueous Ammonia

700008893 - ToF G2-S Standard Ki Kit - 3
Part Number: 700008893
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid & Solid
Storage Refrigerator 2 to 8 C
System LC/MS

info

186002616 - Symmetry C18 Column, 100Å, 5 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: 186002616

Symmetry C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results.

186002616 - Symmetry C18 Column, 100Å, 5 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: 186002616
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 19.1
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

700000344 - Graphite Ferrule, APcI, GVF-004

Part Number: 700000344

This spare part is a Waters Quality part

700000344 - Graphite Ferrule, APcI, GVF-004
Part Number: 700000344
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
GCT Mass Spectrometer
GCT Premier Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro GC Mass Spectrometer
Quattro micro Mass Spectrometer
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed

info

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022995

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022995
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.005 in. (0.127 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT200691 - NEEDLE TIPS, PKG OF 20

Part Number: WAT200691
WAT200691 - NEEDLE TIPS, PKG OF 20
Part Number: WAT200691
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

info

186006151 - XSelect HSS T3 XP Column, 100Å, 2.5 µm, 2.1 mm X 100 mm, 1/pkg

Part Number: 186006151

The XSelect HSS T3 is a low-coverage C18 phase compatible with 100% aqueous mobile phase and should be your first choice when developing separations for polar and non-polar compounds. The XSelect HSS T3 columns exhibit ultra-low MS bleed and are fully scalable and transferable to UPLC separations. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.

186006151 - XSelect HSS T3 XP Column, 100Å, 2.5 µm, 2.1 mm X 100 mm, 1/pkg
Part Number: 186006151
Brand: XSelect

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 11
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format XP Column
ID 2.1 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 230
System HPLC
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

405000981 - Guard Connector

Part Number: 405000981

Ridged connector assembly designed to directly connect a guard column to an analytical column.

405000981 - Guard Connector
Part Number: 405000981
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Stainless Steel Tubing
Hardware Type Fitting
Inside Diameter 0.020 in. (0.508 mm)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

700005418 - HP SEAL, .0787 ID, FLANGED, BIO, (2PK)

Part Number: 700005418

ACQUITY H-Class Bio High Pressure Seal, .0787 ID, (2PK) for BioQSM

700005418 - HP SEAL, .0787 ID, FLANGED, BIO, (2PK)
Part Number: 700005418
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category ACQUITY
Products ACQUITY H-Class Bio Quaternary Solvent Manager
Replacement Schedule As Needed

info

WAT020525 - Sep-Pak Florisil Plus Long Cartridge, 910 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk

Part Number: WAT020525

Polar, highly active, weakly basic sorbent for adsorption of low to moderate polarity species from nonaqueous solutions.

WAT020525 - Sep-Pak Florisil Plus Long Cartridge, 910 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk
Part Number: WAT020525
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Florisil
Format/Type Plus Long Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 910 mg
Units In Package 50/pkg
Water Wettable Water Wettable

info

WAT010551 - IC-Pak Anion-exchange Guard-Pak Insert, 10 µm, 5/pkg

Part Number: WAT010551

Waters offers an array of products for ion chromatography . IC-Pak resin based columns allow you to analyze a full range of ions from numerous sample matrices, both simple and complex. They offer an exceptional linear loading range of less than 1.0 ppb to greater than 400 ppm without dilution and without pH limitation on eluent or sample. The flexibility exists for accurate and reproducible anion and cation analyses at all concentration levels.

WAT010551 - IC-Pak Anion-exchange Guard-Pak Insert, 10 µm, 5/pkg
Part Number: WAT010551
Brand: IC-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Anion-exchange
Format Guard-Pak Insert
Particle Size (dp) 10 µm
Units in Package 5/pkg

info

186006732 - XSelect CSH Fluoro Phenyl XP Column, 130Å, 2.5 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: 186006732

Designed to maximize selectivity differences, the XSelect CSH Fluoro-Phenyl column provides you with maximum method development freedom, especially when using low pH mobile phases. The non-encapped sorbent provides you with enhanced retention of acidic compounds. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.

186006732 - XSelect CSH Fluoro Phenyl XP Column, 130Å, 2.5 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: 186006732
Brand: XSelect

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 10
Bonding Technology Fluoro Phenyl
Chemistry PFP / Fluoro-Phenyl
Endcapped No
Endfitting Type Waters
Format XP Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System HPLC
Technology CSH
USP Classification L43
Units in Package 1/pkg
pH Range 1 - 8

info

186000272C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 2 mL Volume, 100/pkg

Part Number: 186000272C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

186000272C - LCGC Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 2 mL Volume, 100/pkg
Part Number: 186000272C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Bruker
Dynatech
Finnigan
Fisons
Gilson
Hitachi
L.E.A.P.
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2695
Waters 2795
Certified LCGC Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Clear Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 2 mL

info

186007114 - CORTECS UPLC C18+ Column, 90Å, 1.6 µm, 2.1 mm X 50 mm, 1/pkg

Part Number: 186007114

CORTECS C18+ columns are general purpose, high efficiency C18 columns based on a solid-core particle that are designed to deliver excellent peak shape for basic analytes at low pH.

186007114 - CORTECS UPLC C18+ Column, 90Å, 1.6 µm, 2.1 mm X 50 mm, 1/pkg
Part Number: 186007114
Brand: CORTECS

Products > Chromatography Consumables & Columns
% Carbon Load 5.7
Bonding Technology C18+
Chemistry C18
Endcapped Yes
Endfitting Type Parker-style
Format Column
ID 2.1 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.6 µm
Particle Substrate Solid-Core
Pore Size 90Å
Silanol Activity Low
Surface Area 100
System UPLC/UHPLC
Technology UPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT052850 - Nova-Pak C8 Cartridge, 60Å, 4 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: WAT052850

The 4 µm small particle size of Nova-Pak bonded phases offers high resolution, more efficient and faster chromatography by using shorter columns, reducing solvent consumption or by using longer columns to resolve even the most complex mixture. Semi-preparative columns with 6µm particle size packings give you an unparalleled range of separation possibilities. Stringent QC procedures in our cGMP manufacturing facility ensure batch-to-batch reproducibility.

WAT052850 - Nova-Pak C8 Cartridge, 60Å, 4 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: WAT052850
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4
Chemistry C8
Endcapped Yes
Format Cartridge
ID 4.6 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 4 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity Medium
Surface Area 120
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 8

info

WAT010910 - Sep-Pak Accell Plus CM Classic Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT010910

Sep-Pak Accell Plus CM Classic cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These Classic-style cartridges are designed for use with positive displacement by a Luer-tip syringe and can also attach easily to vacuum-assisted flow devices using a male/male adaptor.

WAT010910 - Sep-Pak Accell Plus CM Classic Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT010910
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus CM
Format/Type Classic Cartridge
Ion Exch. Capacity 370 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT057919 - Analytical Cell Assembly, 10mm

Part Number: WAT057919

The Analytical Cell Assembly has a Reverse Taper Beam flow cell design with a 10mm path length and a pressure rating of 1000psi.

WAT057919 - Analytical Cell Assembly, 10mm
Part Number: WAT057919
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2996 Photodiode Array Detector
996 Photodiode Array Detector

info

700001239 - ZQ/ Quattro Micro Extraction Cone Seal Ring

Part Number: 700001239

This spare part is a Waters Quality part

700001239 - ZQ/ Quattro Micro Extraction Cone Seal Ring
Part Number: 700001239
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Mass Spectrometry
Products 3100 Mass Detector
EMD 1000 Mass Spectrometer
Q-Tof Premier Mass Spectrometer
Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Quattro micro Mass Spectrometer
SYNAPT™ MS
Single Quad Detector
Synapt High Definition MS System™
Tandem Quadrupole Detector
ZQ Mass Spectrometer
Replacement Schedule As Needed
sparepartsystemscategory LCMS

info

PSS830815 - Spherisorb Phenyl Column, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: PSS830815

Spherisorb Phenyl columns contains a non-endcapped silica-based Phenyl phase that provides unique compound selectivity for reversed-phase applications.

PSS830815 - Spherisorb Phenyl Column, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: PSS830815
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 2.5
Chemistry Phenyl
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L11
Units in Package 1/pkg
pH Range 2 - 8