Product Listing:  700003115 - Collet, Reusable, HPFT, 2/pkg   to   WAT036800 - Sep-Pak tC18 Plus Long Cartridge, 900 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Sorted by Best Sellers
  Product    
info

700003115 - Collet, Reusable, HPFT, 2/pkg

Part Number: 700003115

ACQUITY Reusable Collet, HPFT, (2PK) used on Column Heaters

700003115 - Collet, Reusable, HPFT, 2/pkg
Part Number: 700003115
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category ACQUITY
Products ACQUITY UPLC High Temperature Column Heater
ACQUITY UPLC Column Heater Module
Replacement Schedule As Needed

info

176001744 - PFC Analysis Kit

Part Number: 176001744

Waters ACQUITY UPLC total solution for the analysis of Perfluorinated Compounds (PFCs). The kit contains ACQUITY BEH C18 column, PFC isolator column, and other PFCs-free components optimized for use with the ACQUITY system. Sample preparation consumables such as Oasis HLB cartridges, PFC calibration standards, PFC unknown QC standards, and sample vials are also included.

176001744 - PFC Analysis Kit
Part Number: 176001744
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Format Column Kit

info

186000113 - Symmetry Shield RP18 Cartridge, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: 186000113

These reversed-phase columns contain Waters patented embedded polar group technology that “shields” the silica’ residual silanol surface from highly basic analytes. The reduced silanol activity for the SymmetryShield RP18 column significantly improves peak shape and resolution. This product needs to be used in conjunction with other parts. Please see the section below on related parts for more information

186000113 - Symmetry Shield RP18 Cartridge, 100Å, 5 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: 186000113
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 17
Bonding Technology Shield RP18
Chemistry C18
Endcapped Yes
Format Cartridge
ID 4.6 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186008694 - CORTECS UPLC Shield RP18 Column, 90Å, 1.6 µm, 2.1 mm X 100 mm, 1/pkg

Part Number: 186008694

CORTECS Shield RP18 columns provides complimentary selectivity to C8 and C18 stationary phases. The embedded carbamate group in the bonded phase ligand provides alternate selectivity, especially for phenolic compounds compared to straight chain alkyl columns. The solid core particle morphology offers high efficiency and lower backpressures when compared to fully porouse particles of similar particle size.

186008694 - CORTECS UPLC Shield RP18 Column, 90Å, 1.6 µm, 2.1 mm X 100 mm, 1/pkg
Part Number: 186008694
Brand: CORTECS

Products > Chromatography Consumables & Columns
Bonding Technology Shield RP18
Chemistry C18
Endcapped Yes
Endfitting Type Parker-style
Format Column
ID 2.1 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.6 µm
Particle Substrate Silica
Pore Size 90Å
Silanol Activity Low
Surface Area 100
Technology UPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT025656 - Sapphire Plunger

Part Number: WAT025656

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances minimize the wear of the plunger seal. Careful concentric alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts. Included with the plunger is a pre-mounted C-Clip, which eliminates the need to remount this component.

WAT025656 - Sapphire Plunger
Part Number: WAT025656
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category Pumps
Systems
Products 510 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1

info

186004713 - Oasis Peptide Method Development 96 well µElution Plate, 2 mg, 30 µm, 1/pkg

Part Number: 186004713

Oasis Peptide Method Development µElution Plate is designed to simplify the process of sample preparation for the analysis of therapeutic peptides in plasma. The 96-well plate format contains six rows each of two Oasis mixed-mode, ion-exchange chemistries: a strong exchanger (MAX) and a weak cation exchanger (WCX). Sample preparation method development can be quickly and easily achieved with the use of a single SPE protocol. The Oasis Peptide µElution Method Development Plate is sold separately or as a component of the UPLC Therapeutic Peptide Method Development Kit (176001835) and the HPLC Therapeutic Peptide Method Development Kit (176001836).

186004713 - Oasis Peptide Method Development 96 well µElution Plate, 2 mg, 30 µm, 1/pkg
Part Number: 186004713
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Method Development
Format/Type 96-well µElution Plate
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 2 mg
Units In Package 1/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

186003555 - ACQUITY UPLC Peptide BEH C18 Column, 130Å, 1.7 µm, 2.1 mm X 100 mm, 1/pkg

Part Number: 186003555

The ACQUITY BEH130 C18 Peptide Separation Technology (PST) columns have been specially optimized and QC tested for peptide separations. The small-pore (130Å) trifunctionally bonded BEH particle offers the widest usable pH range, superior low pH stability, and ultra-low column bleed to assay samples for proteomics, protein characterization, and peptide synthesis.

186003555 - ACQUITY UPLC Peptide BEH C18 Column, 130Å, 1.7 µm, 2.1 mm X 100 mm, 1/pkg
Part Number: 186003555
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 18
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
QC Tested Peptide
Silanol Activity Low
Surface Area 185
System UPLC/UHPLC
Technology BEH
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

600000668CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 600000668CV

All Waters LCMS Certified vials are produced following tightly controlled manufacturing processes and handling procedures. They are tested with mass spectrometers and come packaged with a certificate of analysis showing the reference and vial scan for the manufacturing lot.

600000668CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 600000668CV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Beckman
Dynatech
Finnigan
Gilson
Hitachi
L.E.A.P.
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2695
Waters 2795
Waters Acquity
Certified LCMS Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Clear Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL

info

186003886C - LCGC Certified Amber Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 186003886C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

186003886C - LCGC Certified Amber Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 186003886C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
L.E.A.P.
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2795
Certified LCGC Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Max Recovery Vial
GlassType Amber Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL

info

6436004-S1 - 1/16in. x 0.007in PEEK Tube

Part Number: 6436004-S1

5M Yellow PEEK Tubing

6436004-S1 - 1/16in. x 0.007in PEEK Tube
Part Number: 6436004-S1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
LCT Mass Spectrometer
LCT Premier
LCT Premier XE
Platform LCZ Mass Detector
Q-Tof II Mass Spectrometer
Q-Tof 1 Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof Premier Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro Mass Spectrometer
SYNAPT™ MS
Synapt High Definition MS System™
Xevo Q-Tof Mass Spec
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed

info WAT011795 - DeltaPak C18 Column, 100Å, 5 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT011795
Brand: DeltaPak

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Peptide Separations > Delta-Pak Columns
% Carbon Load 17
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186004051 - Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: 186004051

Sep-Pak Accell Plus QMA Carbonate Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with a large pore size (300Å) and a carbonate counter-ion. These cartridges are used for extraction of anionic analytes in aqueous and non-aqueous solutions when the chloride counter-ion in the standard Sep-Pak Accell Plus QMA cartridges interferes with the analysis. These Light-style cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

186004051 - Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: 186004051
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus QMA Carbonate
Format/Type Plus Light Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 2 - 8 pH

info

700005489 - Super F/Less Ferrule C/W SS Ring (5PK)

Part Number: 700005489

This spare part is a genuine Waters Quality Part

700005489 - Super F/Less Ferrule C/W SS Ring (5PK)
Part Number: 700005489
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Mass Spectrometry
Products SQ Detector 2
SYNAPT G2 HDMS System
SYNAPT G2 MS System
SYNAPT G2-S
Xevo G2 Q-Tof Mass Spec
Xevo G2 TOF Mass Spec
Xevo Q-Tof Mass Spec
Xevo TQ-S MS
Xevo TQD
Replacement Schedule As Needed

info

186005351 - ACQUITY UPLC CSH Fluoro Phenyl Column, 130Å, 1.7 µm, 2.1 mm X 50 mm, 1/pkg

Part Number: 186005351

Designed to maximize selectivity differences, the ACQUITY CSH Fluoro-Phenyl column provides maximum method development freedom, especially when using low pH mobile phases. The non-encapped sorbent provides you with enhanced retention of acidic compounds.

186005351 - ACQUITY UPLC CSH Fluoro Phenyl Column, 130Å, 1.7 µm, 2.1 mm X 50 mm, 1/pkg
Part Number: 186005351
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 10
Bonding Technology Fluoro Phenyl
Chemistry PFP / Fluoro-Phenyl
Endcapped No
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System UPLC/UHPLC
Technology CSH
USP Classification L43
Units in Package 1/pkg
pH Range 1 - 8

info

PSL404219 - Aluminum, Crimp Cap and PTFE/silicone Septum, 100/pkg

Part Number: PSL404219

For more information on the complete line of Waters vials, please download Waters latest brochure on vials and accessories.

PSL404219 - Aluminum, Crimp Cap and PTFE/silicone Septum, 100/pkg
Part Number: PSL404219
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Certified Not Certified
Closure Type Crimp
Color Aluminum
Format Cap and PTFE/silicone Septum
Units in Package 100/pkg

info

PSS845281 - Spherisorb C8 Column, 80Å, 5 µm, 4 mm X 250 mm, 1/pkg

Part Number: PSS845281

Spherisorb C8 columns are general purpose, silica-based reversed-phase columns that contain an Octyl ligand. These USP L7 columns are used when you require a less retentive sorbent compared to the Spheriorb ODS columns.

PSS845281 - Spherisorb C8 Column, 80Å, 5 µm, 4 mm X 250 mm, 1/pkg
Part Number: PSS845281
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 5.8
Chemistry C8
Endcapped Yes
Endfitting Type Parker-style
Format Column
ID 4 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Silanol Activity Medium
Surface Area 220
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 8

info

186004647 - Oasis WAX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk

Part Number: 186004647

The new Oasis WAX weak anion-exchange SPE chemistry is designed for scientists searching for a fast, simple and highly selective method for sample preparation and cleanup. Oasis WAX is a polymeric reversed-phase, weak ion exchange mixed-mode sorbent that allows for the retention and release of strong acidic compounds (e.g. phosphonates). The elution solvent is MS friendly and the sorbent is completely water wettable.

186004647 - Oasis WAX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk
Part Number: 186004647
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry WAX
Format/Type Vac Cartridge
Ion Exch. Capacity 0.6 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

700004073 - ALLIANCE SOLVENT MGR PERFORM MAINT KIT

Part Number: 700004073

The Waters® Performance Maintenance Kit for the Alliance Solvent Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: diffuser, plunger seals, face seals, wash tube, plunger assembly, sealwash face seals, sealwash plunger seals, check valve cartridges, solvent filter and a filter insert.

700004073 - ALLIANCE SOLVENT MGR PERFORM MAINT KIT
Part Number: 700004073
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Separations Module
Products 2695 Separations Module
Replacement Schedule Annually

info

725000147 - 28mm OD Vials Collection Rack

Part Number: 725000147

The optional 28mm Vial Collection Rack replaces the standard tube rack. It allows for the collection of samples into 28mm OD scintillation vials. The rack can accomodate 120 vials.

725000147 - 28mm OD Vials Collection Rack
Part Number: 725000147
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Systems Components
Products Waters Fraction Collector II
Waters Fraction Collector III
Replacement Schedule No

info

186000776 - Oasis MCX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk

Part Number: 186000776

The 6 cc Oasis MCX cartridges contain the Oasis MCX, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. Since the Oasis MCX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186000776 - Oasis MCX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk
Part Number: 186000776
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry MCX
Format/Type Vac Cartridge
Ion Exch. Capacity 1 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

405011492 - Needle Seat

Part Number: 405011492

The needle seat is a spare part used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sm-FTN. The original part number was 405008397 and the new replacement part number is 405011492.

405011492 - Needle Seat
Part Number: 405011492
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

700008931 - Capillary Tube

Part Number: 700008931

Stainless Steel Capillary Tube

700008931 - Capillary Tube
Part Number: 700008931
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products SYNAPT G2 MS System
SYNAPT G2-S
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

186003729 - Atlantis T3 Column, 100Å, 3 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: 186003729

Atlantis T3 columns are universal, silica-based, reversed-phase C18 columns that provide balanced retention of polar and hydrophobic molecules and should be your first choice when developing separations of polar and non-polar compounds.

186003729 - Atlantis T3 Column, 100Å, 3 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: 186003729
Brand: Atlantis

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 14
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 330
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

205016040 - nanoACQUITY UPLC Flex Cart

Part Number: 205016040

The wheeled cart is a complete system platform that facilitates convenient installation of the nanoACQUITY UPLC. It is recommended that a Waters Field Service Engineer install the nanoACQUITY system onto the Flex Cart.

205016040 - nanoACQUITY UPLC Flex Cart
Part Number: 205016040
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category nanoACQUITY
Products High Pressure nanoACQUITY UPLC Binary Solvent Manager/Auxillary Solvent Manager
High Pressure nanoACQUITY UPLC Sample Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

WAT010551 - IC-Pak Anion-exchange Guard-Pak Insert, 10 µm, 5/pkg

Part Number: WAT010551

Waters offers an array of products for ion chromatography . IC-Pak resin based columns allow you to analyze a full range of ions from numerous sample matrices, both simple and complex. They offer an exceptional linear loading range of less than 1.0 ppb to greater than 400 ppm without dilution and without pH limitation on eluent or sample. The flexibility exists for accurate and reproducible anion and cation analyses at all concentration levels.

WAT010551 - IC-Pak Anion-exchange Guard-Pak Insert, 10 µm, 5/pkg
Part Number: WAT010551
Brand: IC-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Anion-exchange
Format Guard-Pak Insert
Particle Size (dp) 10 µm
Units in Package 5/pkg

info

186006732 - XSelect CSH Fluoro Phenyl XP Column, 130Å, 2.5 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: 186006732

Designed to maximize selectivity differences, the XSelect CSH Fluoro-Phenyl column provides you with maximum method development freedom, especially when using low pH mobile phases. The non-encapped sorbent provides you with enhanced retention of acidic compounds. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.

186006732 - XSelect CSH Fluoro Phenyl XP Column, 130Å, 2.5 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: 186006732
Brand: XSelect

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 10
Bonding Technology Fluoro Phenyl
Chemistry PFP / Fluoro-Phenyl
Endcapped No
Endfitting Type Waters
Format XP Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System HPLC
Technology CSH
USP Classification L43
Units in Package 1/pkg
pH Range 1 - 8

info

186000478 - XTerra MS C18 Column, 125Å, 5 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: 186000478

XTerra MS C18 columns are general purpose, hybrid-based, reversed-phase C18 columns that are designed to be compatible with mass spectrometry applications. These first generation columns provide superior pH stability compared to a silica-based column.

186000478 - XTerra MS C18 Column, 125Å, 5 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: 186000478
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15.5
Bonding Technology MS C18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

700002265 - Dust Filter Kit

Part Number: 700002265

The Dust Filter Kit contains a foam dust filter and support frame to be added to the main lower door and a removable plastic floppy drive cover. This kit can be ordered for retrofit to existing Separations Modules.

700002265 - Dust Filter Kit
Part Number: 700002265
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2695 Separations Module
2695D Dissolution Separations Module
2795 Separations Module
2796 Bioseparations Module
Replacement Schedule As Needed

info

700004219 - Sample Cone

Part Number: 700004219

This spare part is a Waters Quality part.

700004219 - Sample Cone
Part Number: 700004219
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Xevo™ TQ MS
Replacement Schedule As Needed

info

WAT036800 - Sep-Pak tC18 Plus Long Cartridge, 900 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT036800

Silica-based bonded phase with strong hydrophobicity; trifunctional bonding chemistry gives it an increased hydrolytic stabilty; applications similar to C18.

WAT036800 - Sep-Pak tC18 Plus Long Cartridge, 900 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT036800
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry TC18
Endcap End Capped
Format/Type Plus Long Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 900 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH