Product Listing:  700004216 - Cone Gas Nozzle   to   WAT200677 - Extraction manifold, 20-position/no rack

Sorted by Best Sellers
  Product    
info

700004216 - Cone Gas Nozzle

Part Number: 700004216

This spare part is a Waters Quality part

700004216 - Cone Gas Nozzle
Part Number: 700004216
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
SPECVALUE134881948
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

6028622-S1 - Fused Silica Tube, 25-micron ID, 1m

Part Number: 6028622-S1

The Fused Silica Tube, 25µm ID is used for the Stream Select Module in the CapLC XE System. It is also used in the SYNAPT G2 HDMS and SYNAPT G2 MS. The capillary measures 375µm x25µm and is 1 m in length.

6028622-S1 - Fused Silica Tube, 25-micron ID, 1m
Part Number: 6028622-S1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products CapLC XE System
SYNAPT G2 HDMS System
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

WAT027061 - Porapak Q 100-120 mesh, 26 grams

Part Number: WAT027061

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027061 - Porapak Q 100-120 mesh, 26 grams
Part Number: WAT027061
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

700005346 - Corona Discharge Pin

Part Number: 700005346

This spare part is a Waters Quality part

700005346 - Corona Discharge Pin
Part Number: 700005346
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SQ Detector 2
SYNAPT G2-S
Xevo TQD
Xevo™ TQ MS
Replacement Schedule As Needed

info

186006013 - Leucine Enkephalin

Part Number: 186006013

Leucine Enkephalin is a lyophilized peptide intended to be used as a reference material for mass spectrometer tuning and calibration. Two vials of 3 mg Leucine Enkephalin are provided in this package. This product contains 2x of the following: • 3 mg ± 0.06 mg Leucine Enkephalin solid in a 12 mL Amber Screw top Vial Store frozen at - 20 ºC ± 10 °C upon arrival.

186006013 - Leucine Enkephalin
Part Number: 186006013
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Solid
Storage Frozen -20 C
System LC/MS

info

186000195 - Symmetry C18 Method Validation Kit, 300Å, 3.5 µm, 4.6 mm X 150 mm, 3/pkg

Part Number: 186000195

Symmetry columns continues to set the standard for HPLC drug assays, giving you confidence in the long-term compliance of your HPLC methods. No need to compromise on peak shape, selectivity, column-to-column and batch-to-batch reproducibility, or other critical performance characteristics. Available in a variety of particle sizes, chemistries and dimensions.

186000195 - Symmetry C18 Method Validation Kit, 300Å, 3.5 µm, 4.6 mm X 150 mm, 3/pkg
Part Number: 186000195
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Symmetry300 Columns
% Carbon Load 8.5
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Method Validation Kit
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Silica
Pore Size 300Å
Silanol Activity Low
Surface Area 110
System HPLC
USP Classification L1
Units in Package 3/pkg
pH Range 2 - 8

info

6060743-S1 - Tube PTFE 1/16 " OD, 0.015" ID, 1m

Part Number: 6060743-S1

1m length of PTFE tube (1/16 OD, 0.015 ID).

6060743-S1 - Tube PTFE 1/16 " OD, 0.015" ID, 1m
Part Number: 6060743-S1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products Xevo TQD
Replacement Schedule As Needed

info

WAT054392 - Dextrans Standard

Part Number: WAT054392

A unique collection of 5 GPC standards (Gel Permeation Chromatography standards) for molecular weight determination. These Dextran GPC standards cover a molecular weight range from 5,000 Daltons to 750,000 Daltons

WAT054392 - Dextrans Standard
Part Number: WAT054392
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Chemical and Environmental Analysis Standards > GPC & GFC Standards
Applications Life Science
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System HPLC -UV

info

WAT270946DV - Deactivated Clear Glass 12 x 32mm screw neck Vial with 10 mm Cap and PTFE/silicone Septum, 2 mL,100/pkg

Part Number: WAT270946DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

WAT270946DV - Deactivated Clear Glass 12 x 32mm screw neck Vial with 10 mm Cap and PTFE/silicone Septum, 2 mL,100/pkg
Part Number: WAT270946DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Beckman
Gilson
Hitachi
LDC
Perkin-Elmer
Shimadzu
Spark
Spectra-Physics
Varian
Waters 2695
Waters 2795
Certified Not Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Deactivated Clear Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 2 mL

info

186007474 - ACQUITY UPLC M-Class HSS T3 Column, 1.8 µm, 75 µm X 250 mm, 1/pkg

Part Number: 186007474

ACQUITY UPLC M-Class Columns are designed for optimal performance for nano- to micro scale liquid chromatographic separation, offering the highest possible sensitivity, resolution and reproducibility for biomarker discovery and protein identification and characterization. The 300µm ID columns are built utilizing a ultra low dispersion column design and offer the same simplicity of use as more traditional columns. Like all M-Class columns they withstand 15kpsi operating pressure and handle pressure fluctuations during injection extremely well and thus provide superior longevity. In order to achieve maximum performance, it is important to ensure that proper connections are made to minimize peak tailing and poor efficiency. This specific offering contains Waters patented BEH Technology 130A pore, C18, 1.7um particles. Each batch is specifically QC tested using a gradient separation of a tryptic digest of cytochrome c to before being QC accepted as a Peptide separation column.

186007474 - ACQUITY UPLC M-Class HSS T3 Column, 1.8 µm, 75 µm X 250 mm, 1/pkg
Part Number: 186007474
Brand: ACQUITY UPLC M-Class

Products > Chromatography Consumables & Columns > Columns
% Carbon Load 11
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type 10-32 for 1/16" male /360um open
Format Column
ID 75 µm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.8 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 230
System Nano/Micro
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186003555 - ACQUITY UPLC Peptide BEH C18 Column, 130Å, 1.7 µm, 2.1 mm X 100 mm, 1/pkg

Part Number: 186003555

The ACQUITY BEH130 C18 Peptide Separation Technology (PST) columns have been specially optimized and QC tested for peptide separations. The small-pore (130Å) trifunctionally bonded BEH particle offers the widest usable pH range, superior low pH stability, and ultra-low column bleed to assay samples for proteomics, protein characterization, and peptide synthesis.

186003555 - ACQUITY UPLC Peptide BEH C18 Column, 130Å, 1.7 µm, 2.1 mm X 100 mm, 1/pkg
Part Number: 186003555
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 18
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
QC Tested Peptide
Silanol Activity Low
Surface Area 185
System UPLC/UHPLC
Technology BEH
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

WAT054705 - Sep-Pak Alumina N 35 cc Vac Cartridge, 10 g Sorbent per Cartridge, 50-300 µm Particle Size, 10/pk

Part Number: WAT054705

Sep-Pak Alumina N Vac cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT054705 - Sep-Pak Alumina N 35 cc Vac Cartridge, 10 g Sorbent per Cartridge, 50-300 µm Particle Size, 10/pk
Part Number: WAT054705
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 35 cc
Chemistry Alumina N
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 10 g
Units In Package 10/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT094170DV - Deactivated 300uL glass insert with poly spring, 100pk

Part Number: WAT094170DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

WAT094170DV - Deactivated 300uL glass insert with poly spring, 100pk
Part Number: WAT094170DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Bruker
Dynatech
Finnigan
Fisons
Gilson
Hitachi
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2695
Waters 2795
Waters Acquity
Certified Not Certified
Format Low Volume Inserts and Springs
GlassType Deactivated
Units in Package 100/pkg
Volume Capacity 300 µL

info

700006057 - Injector Cartridge, FTN, 18 KPSI

Part Number: 700006057

ACQUITY I-Class FTN Injector Cartridge, 18 KPSI

700006057 - Injector Cartridge, FTN, 18 KPSI
Part Number: 700006057
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category ACQUITY
Products ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

600000668CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 600000668CV

All Waters LCMS Certified vials are produced following tightly controlled manufacturing processes and handling procedures. They are tested with mass spectrometers and come packaged with a certificate of analysis showing the reference and vial scan for the manufacturing lot.

600000668CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 600000668CV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Beckman
Dynatech
Finnigan
Gilson
Hitachi
L.E.A.P.
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2695
Waters 2795
Waters Acquity
Certified LCMS Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Clear Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL

info

700005980 - Latch Set, CM-A/CM-Aux Trough Cover. L&R

Part Number: 700005980

ACQUITY CMA/CM-Aux Trough Cover Latch Set, Left &Right

700005980 - Latch Set, CM-A/CM-Aux Trough Cover. L&R
Part Number: 700005980
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY APC CM-S
Replacement Schedule As Needed

info

186003886C - LCGC Certified Amber Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 186003886C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

186003886C - LCGC Certified Amber Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 186003886C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
L.E.A.P.
LDC
Perkin-Elmer
Spark
Spectra-Physics
Varian
Waters 2795
Certified LCGC Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Max Recovery Vial
GlassType Amber Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL

info

186002640 - Polypropylene 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 300 µL Volume, 100/pkg

Part Number: 186002640

Clean polypropylene-molded vial, preferred in applications where there is a concern that compound or molecule may stick to a polar glass surface. This vial is a cost effective alternative to glass.

186002640 - Polypropylene 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 300 µL Volume, 100/pkg
Part Number: 186002640
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
LDC
Perkin-Elmer
Spectra-Physics
Varian
Waters 2695
Waters 2795
Certified Not Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Polypropylene
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 300 µL

info

186003533 - ACQUITY UPLC HSS C18 Column, 100Å, 1.8 µm, 2.1 mm X 100 mm, 1/pkg

Part Number: 186003533

ACQUITY UPLC HSS C18 chemistry is an ultra-performance general purpose C18 bonded phase that provides superior peak shape for bases, increased retention (vs. ACQUITY UPLC BEH C18 columns), and extremely long column lifetimes at low pH. ACQUITY HSS C18 columns are fully scalable and transferable to HPLC separations.

186003533 - ACQUITY UPLC HSS C18 Column, 100Å, 1.8 µm, 2.1 mm X 100 mm, 1/pkg
Part Number: 186003533
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 15
Chemistry C18
Endcapped Yes
Endfitting Type Parker-style
Format Column
ID 2.1 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.8 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 230
System UPLC/UHPLC
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 8

info

WAT034106 - Shodex KF-G Guard Column, 5 µm, 4.6 x 10 mm (THF)

Part Number: WAT034106

Ultrahigh efficiency GPC columns

WAT034106 - Shodex KF-G Guard Column, 5 µm, 4.6 x 10 mm (THF)
Part Number: WAT034106
Brand: Shodex
Shodex

Products > Chromatography Consumables & Columns > GPC & SEC Columns > GPC & SEC Columns
Endfitting Type Shodex
Format Guard Column
ID 4.6 mm
Length (mm) 10 mm
Mode SEC/GPC
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Polymer
Solvent THF
Units in Package 1/pkg
pH Range 2 - 12

info

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022995

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022995
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.005 in. (0.127 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

700002747 - Pin Plug, 1/16in., High Pressure, 5/pkg

Part Number: 700002747

The pin plug is required in port 6 of the Trap Valve pod assembly in the following configurations for the nanoACQUITY: Direct Injection, Single Pump Trapping, Vented Dual Pump Trapping, , and 2D with Dilution. To see the Fluidic Configurations for the nanoACQUITY UPLC, go to the Url Link below, under Systems select nanoACQUITY, click on the Waters Graphical Part Locator, and then choose Fluidic Configurations on the right side of the page. There will be the six different configurations of the nanoACQUITY that you can click on individually to see a larger image. There will also be a parts list for that specific configuration on the right side of the page.

700002747 - Pin Plug, 1/16in., High Pressure, 5/pkg
Part Number: 700002747
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Bio Quaternary Solvent Manager
nanoACQUITY UPLC with 2D Technology
Replacement Schedule As Needed

info

WAT200691 - NEEDLE TIPS, PKG OF 20

Part Number: WAT200691
WAT200691 - NEEDLE TIPS, PKG OF 20
Part Number: WAT200691
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories

info PSL613301 - Male Nut PEEK, Knurled Head
Part Number: PSL613301
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

186003952 - XBridge Oligonucleotide BEH C18 Column, 130Å, 2.5 µm, 2.1 mm X 50 mm, 1/pkg

Part Number: 186003952

Waters Oligonucleotide Separation Technology (OST) columns are based on the second generation of hybrid-silica BEH™ Technology particles functionalized with C18. The separation of detritylated synthetic oligonucleotide samples is based on the well-established method of ion-pair, reversed-phase chromatography. The availability of 1.7µm UPLC® technology or 2.5µm HPLC particles in various column dimensions provides flexibility to meet various laboratory-scale isolation or analysis needs and delivers exceptional sample resolution and superior column life. In addition, Waters manufacturing and quality control testing procedures help ensure consistent batch-to-batch and column-to-column performance regardless of application demands.

186003952 - XBridge Oligonucleotide BEH C18 Column, 130Å, 2.5 µm, 2.1 mm X 50 mm, 1/pkg
Part Number: 186003952
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Oligonucleotides Separations > Oligonucleotides Separation Technology Columns
Application Oligonucleotide
Chemistry C18
Format Column
ID 2.1 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Size (dp) 2.5 µm
Pore Size 130Å
QC Tested Oligonucleotide
System HPLC
Technology BEH
USP Classification L1
Units in Package 1/pkg

info

700005341 - Assy, Mixer, 50µL Zirconia, 18K

Part Number: 700005341

ACQUITY I-Class BSM Mixer Assembly, 50µL Zirconia, standard

700005341 - Assy, Mixer, 50µL Zirconia, 18K
Part Number: 700005341
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY I-Class BSM
Replacement Schedule As Needed

info

186000432 - XTerra MS C18 Column, 125Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg

Part Number: 186000432

XTerra MS C18 columns are general purpose, hybrid-based, reversed-phase C18 columns that are designed to be compatible with mass spectrometry applications. These first generation columns provide superior pH stability compared to a silica-based column.

186000432 - XTerra MS C18 Column, 125Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg
Part Number: 186000432
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15.5
Bonding Technology MS C18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

186000776 - Oasis MCX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk

Part Number: 186000776

The 6 cc Oasis MCX cartridges contain the Oasis MCX, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. Since the Oasis MCX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186000776 - Oasis MCX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk
Part Number: 186000776
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry MCX
Format/Type Vac Cartridge
Ion Exch. Capacity 1 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

WAT270927 - 2690 GPV Assembly

Part Number: WAT270927

This spare part is a Waters Quality part

WAT270927 - 2690 GPV Assembly
Part Number: WAT270927
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info WAT200677 - Extraction manifold, 20-position/no rack
Part Number: WAT200677
Products > Chromatography Consumables & Columns > Sample Preparation Products > SPE Accessories
Category Manifold for Cartridges ( pp 26)