Product Listing:  700000436 - Probe Adjuster Assembly (LCZ/ZMD/Ultima)   to   186002805 - Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, 1 mL Volume, 100/pkg

Sorted by Best Sellers
  Product    
info

700000436 - Probe Adjuster Assembly (LCZ/ZMD/Ultima)

Part Number: 700000436

This spare part is a Waters Quality part

700000436 - Probe Adjuster Assembly (LCZ/ZMD/Ultima)
Part Number: 700000436
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
Q-Tof micro Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed

info

186004802 - ACQUITY UPLC BEH Amide Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: 186004802

ACQUITY BEH Amide columns retain extremely polar compounds, including carbohydrates and sugars. Based on BEH technology the ACQUITY Amide columns offer a chemically stable, trifunctionally bonded amide phase that is stable from pH 2 to 12 to enable the separation of polar analytes that span a wide range of polarity, structural moiety and pKa.

186004802 - ACQUITY UPLC BEH Amide Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: 186004802
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 12
Chemistry Amide
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Hydrophilic Interaction (HILIC)
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
Surface Area 185
System UPLC/UHPLC
Technology BEH
Units in Package 1/pkg
pH Range 2 - 11

info

186003335 - XBridge BEH Phenyl Column, 130Å, 3.5 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: 186003335

XBridge BEH Phenyl columns provide complementary selectivity to C18 stationary phases, especially for polyaromatic compounds. This most chemically stable commercially available Phenyl sorbent on the market and provides you with ultra-low column bleed, long column lifetimes and excellent peak shape.

186003335 - XBridge BEH Phenyl Column, 130Å, 3.5 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: 186003335
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15
Chemistry Phenyl
Endcapped Yes
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System HPLC
Technology BEH
USP Classification L11
Units in Package 1/pkg
pH Range 1 - 12

info

WAT094263 - Symmetry Shield RP 8 Column, 100Å, 3.5 µm, 4.6 mm X 75 mm, 1/pkg

Part Number: WAT094263

These reversed-phase columns contain Waters patented embedded polar group technology that “shields” the silica’ residual silanol surface from highly basic analytes. The reduced silanol activity for the SymmetryShield RP8 column significantly improves peak shape and resolution.

WAT094263 - Symmetry Shield RP 8 Column, 100Å, 3.5 µm, 4.6 mm X 75 mm, 1/pkg
Part Number: WAT094263
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 75 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 8

info

WAT026613 - GFP Plunger Seal (Black)

Part Number: WAT026613

Made from high-performance, glass-filled polymer, the GFP Plunger Seal is manufactured with an internal spring that is designed to provide the correct pressure on the plunger, increasing the life of both the sapphire plunger and the seal itself. Waters® has determined that the Clear-100™ Seal is best suited to most applications and is the seal most commonly used in Waters solvent delivery systems and Performance Maintenance Kits. However, the GFP seal may be a better choice in certain applications.

WAT026613 - GFP Plunger Seal (Black)
Part Number: WAT026613
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Systems
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
LC Module 1

info

176003904 - ACQUITY UPLC Protein BEH SEC Column, 200Å, 1.7 µm, 4.6 x 150 mm and BEH200 SEC Protein Standard Mix

Part Number: 176003904

Based upon the highly successful BEH particle technology, the new patent pending ACQUITY UPLC BEH200 SEC column represents the first commer­cially available sub 2 ìm SEC chemistry. Fully optimized for the analysis of proteins and their aggregates with molecular weights ranging from 10,000 to 450,000 Daltons, the total system solution will routinely deliver fast, accurate aggregate determinations up to 10 times quicker that traditional HPLC-based SEC methods.

176003904 - ACQUITY UPLC Protein BEH SEC Column, 200Å, 1.7 µm, 4.6 x 150 mm and BEH200 SEC Protein Standard Mix
Part Number: 176003904
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 12
Application Protein
Chemistry SEC
Endcapped No
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode SEC/GPC
Molecular Weight Range 10K - 500K
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 200Å
QC Tested Protein
Silanol Activity Low
Surface Area 220
System UPLC/UHPLC
Technology BEH
USP Classification L33
Units in Package 1/pkg
pH Range 1 - 8

info

186002430 - BioSuite C18 Column, 100Å, 3 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: 186002430

BioSuite™ Peptide Analysis columns consist of two premier reversed-phase column chemistries specifically optimized for peptide mapping from simple to complicated digests. BioSuite PA Columns are available in various configurations for LC or LC/MS applications, including 250 mm lengths for ultra high resolution. These BioSuite™ PA-A and PA-B columns provide excellent batch-to-batch reproducibility for consistent results and are uniquely QC tested specifically for peptide mapping. BioSuite™ C18 3µm PA-A is a100Å, difunctional bonded, low ligand density, silica-based reverse-phase column and BioSuite™ C18 3.5µm PA-B is a 300Å, high ligand density, monofunctional, silica-based reverse-phase column.

186002430 - BioSuite C18 Column, 100Å, 3 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: 186002430
Brand: BioSuite

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > BioSuite Columns
Application Peptide
Chemistry C18
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3 µm
Particle Substrate Silica
Pore Size 100Å
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

430002011 - ASSY, EXTENSION LOOP, 100uL

Part Number: 430002011

This is a 100µL Sample loop used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sample Manager-FTN modules.

430002011 - ASSY, EXTENSION LOOP, 100uL
Part Number: 430002011
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category ACQUITY
Products ACQUITY APC SM-pFTN
ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

WAT010656 - Nova-Pak Phenyl Column, 60Å, 4 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: WAT010656

Nova-Pak HP Phenyl columns are based on 4 µm silica-based particle technology. The phenyl ligand is used to achieve unique compound selectivity with reversed-phase applications.

WAT010656 - Nova-Pak Phenyl Column, 60Å, 4 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT010656
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4.6
Chemistry Phenyl
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 4 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity Medium
Surface Area 120
System HPLC
USP Classification L11
Units in Package 1/pkg
pH Range 2 - 8

info

600000669CV - LCMS Certified Amber Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 600000669CV

All Waters LCMS Certified vials are produced following tightly controlled manufacturing processes and handling procedures. They are tested with mass spectrometers and come packaged with a certificate of analysis showing the reference and vial scan for the manufacturing lot.

600000669CV - LCMS Certified Amber Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 600000669CV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
LDC
Perkin-Elmer
Spectra-Physics
Varian
Waters 2695
Waters 2795
Waters Acquity
Certified LCMS Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Amber Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL

info JJAN21018 - Puresil C18, 4.6x250mm column
Part Number: JJAN21018
Products > Chromatography Consumables & Columns > Accessories

info

WAS073703 - Sample Loop, 5mL, SS

Part Number: WAS073703

This spare part is part of the Preparative Chromatography Rack for the 25X5 series of pumps.

WAS073703 - Sample Loop, 5mL, SS
Part Number: WAS073703
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category Injectors
Pumps
Products 2545 Quaternary Gradient Pump
FlexInject Manual Dual Injector Module
PrepLC 4000
Replacement Schedule As Needed

info

700004672 - ESI Probe Service Kit

Part Number: 700004672

The ESI Probe Service Kit contains all the parts necessary to service the probe.

700004672 - ESI Probe Service Kit
Part Number: 700004672
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SQ Detector 2
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Xevo TQ-S MS
Xevo TQD
Xevo™ TQ MS
Replacement Schedule As Needed

info

441000248 - Contact Closure Cable

Part Number: 441000248

This spare part is a Waters Quality part

441000248 - Contact Closure Cable
Part Number: 441000248
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Cables
Product Category Mass Spectrometry
Products Quattro micro Mass Spectrometer
SPECVALUE134881949
Replacement Schedule As Needed

info

205000403 - High Sensitivity Filter Mixer, 425µL

Part Number: 205000403

ACQUITY High Sensitivity Filter Mixer

205000403 - High Sensitivity Filter Mixer, 425µL
Part Number: 205000403
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY UPLC Binary Solvent Manager
Replacement Schedule As Needed

info PSL613324 - PEEK Fittings with Double Ferrules, 1/16in, 10-32 Thread 1/4in/0.605
Part Number: PSL613324
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

430001784 - Inlet Tube Assembly

Part Number: 430001784

The original part number was p/n 430001226 and has been changed to p/n 430001784.

430001784 - Inlet Tube Assembly
Part Number: 430001784
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY UPLC PDA Detector
ACQUITY UPLC eLAmbda PDA Detector
Replacement Schedule As Needed

info

700005478 - Welded Tube Assy, SS, 19.0 LG

Part Number: 700005478

ACQUITY Welded Tube Assy, SS, 19.0 long, used for low pressure

700005478 - Welded Tube Assy, SS, 19.0 LG
Part Number: 700005478
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY APC CM-S
Replacement Schedule As Needed

info

WAS081346 - 10 mm Flow Cell Rebuild Kit

Part Number: WAS081346

The 10mm Flow Cell Rebuild Kit contains the following parts: two lens screws, one entrance lens washer, one entrance lens (curved), ten gaskets, one exit window (flat), one exit lens washer, one cuvette lens screw, one cuvette lens, and one cuvette lens holder.

WAS081346 - 10 mm Flow Cell Rebuild Kit
Part Number: WAS081346
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector
Replacement Schedule As Needed

info

430001749 - ASSY, TUBE INLET .0025 ID LT PEEK NUT

Part Number: 430001749

The Inlet Tube Assembly fits on ACQUITY UPLC TUV Detectors with serial numbers through K05UPT699N and with serial numbers from K05UPT700N and later. This part number used to be 430001214.

430001749 - ASSY, TUBE INLET .0025 ID LT PEEK NUT
Part Number: 430001749
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY PDA (Taperslit) Detectors
ACQUITY UPLC TUV Detector
Replacement Schedule As Needed

info

186001421 - Black Screw Cap for 10mL Glass Vial, 100/pkg

Part Number: 186001421

The screw cap for 10mL glass vials comes as a package of 100.

186001421 - Black Screw Cap for 10mL Glass Vial, 100/pkg
Part Number: 186001421
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters GPC2000
Certified Not Certified
Closure Type Screw Neck
Color Black
Format Cap
Units in Package 100/pkg
Volume Capacity 10 mL

info

186008052 - Oasis PRiME HLB 96-well µElution Plate, 3 mg Sorbent per Well, 1/pk

Part Number: 186008052

Oasis PRiME HLB sets the new performance standard for solid phase extraction cleanup in routine analysis. This sorbent will provide reversed-phase cleanup of acidic, basic and neutral compounds form complex sample matrices. Oasis PRiME HLB has been designed to simplify SPE with fast, easy protocols. It also produces cleaner samples by removing greater than 95% of common matrix interferences such as salts, proteins and phospholipids. Additionally, viscous samples can be processed with faster flows through the device and less plugging. Based on the Oasis HLB sorbent technology, this water-wettable sorbent does not require conditioning and equilibration to provide excellent recoveries.

186008052 - Oasis PRiME HLB 96-well µElution Plate, 3 mg Sorbent per Well, 1/pk
Part Number: 186008052
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry PRiME HLB
Format/Type 96-well µElution Plate
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Sorbent Weight 3 mg
Units In Package 1/pkg
Water Wettable Water Wettable

info

WAT058943 - 96-well Sample collection plate 350µL 50/pkg

Part Number: WAT058943

Waters offers a selection of 96-and 384-well sample/collection plates along with cap mats and heat seals.

WAT058943 - 96-well Sample collection plate 350µL 50/pkg
Part Number: WAT058943
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2795
Certified Not Certified
Format 96 Well Plates
Units in Package 50/pkg
Volume Capacity 350 µL

info

186008304 - ProteinWorks uElution SPE Clean-up Kit

Part Number: 186008304

The ProteinWorks uElution SPE Clean-up Kit is designed for post-digestion peptide clean-up in LC-MS protein quantification via the surrogate peptide approach. This kit includes an optimized SPE protocol and Oasis uElution technology delivering maximum peptide recovery and the removal of digest reagents and other matrix interferences. The uElution Clean-up kit enhances assay sensitivity and improves LC-MS system robustness.

186008304 - ProteinWorks uElution SPE Clean-up Kit
Part Number: 186008304
Brand: ProteinWorks

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector Mass Spec
Packaging 1/pkg
Product Type Kit
Shipping Formulation Solid

info

700000253 - PerformancePLUS™ Cartridge Check Valve System

Part Number: 700000253

The PerformancePLUS Cartridge Check Valve System can be used as either an inlet or outlet valve in the Waters 1515, 1525, 515, and 600, and 610 HPLC pumps. The check valve materials have been carefully specified for solvent compatibility with all HPLC mobile phases. The housing features a two-piece design that allows it to be removed so that the cartridge can be changed without disturbing the fitting on the housing. The PerformancePLUS Cartridge Check Valve System is sold in a package of two valve cartridges and two housings Replacement cartridges are available in pairs [Part Number 700000254]. The housing part number is 700001108 and is also sold in pairs.

700000253 - PerformancePLUS™ Cartridge Check Valve System
Part Number: 700000253
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
Replacement Schedule Annually

info

205000458 - High Flow Nebulizer

Part Number: 205000458

This part number 205000458 replaces the original part number 700002388.

205000458 - High Flow Nebulizer
Part Number: 205000458
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Detectors
Products 2420 Light Scattering Detector
2424 Evaporative Light Scattering Detector
Replacement Schedule As Needed

info

186006111 - XSelect CSH C18 XP Column, 130Å, 2.5 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: 186006111

XSelect CSH C18 columns are general purpose C18 columns that provide alternative selectivity compared to other C18 sorbents. Charged Surface Hybrid (CSH) technology enables superior peak shape and increased loading capacity for basic compounds. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.

186006111 - XSelect CSH C18 XP Column, 130Å, 2.5 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: 186006111
Brand: XSelect

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format XP Column
ID 4.6 mm
Length (mm) 100 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System HPLC
Technology CSH
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 11

info

186000291 - Symmetry C4 Method Validation Kit, 300Å, 3.5 µm, 4.6 mm X 150 mm, 3/pkg

Part Number: 186000291

Symmetry columns continues to set the standard for HPLC drug assays, giving you confidence in the long-term compliance of your HPLC methods. No need to compromise on peak shape, selectivity, column-to-column and batch-to-batch reproducibility, or other critical performance characteristics. Available in a variety of particle sizes, chemistries and dimensions.

186000291 - Symmetry C4 Method Validation Kit, 300Å, 3.5 µm, 4.6 mm X 150 mm, 3/pkg
Part Number: 186000291
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 2.8
Application Protein
Chemistry C4
Endcapped Yes
Endfitting Type Waters
Format Method Validation Kit
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Silica
Pore Size 300Å
Silanol Activity Low
Surface Area 110
System HPLC
USP Classification L26
Units in Package 3/pkg
pH Range 2 - 8

info

WAT026806 - Tubing, 1/8 in. (3.2mm) O.D. X 0.062 in. (1.57 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026806

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026806 - Tubing, 1/8 in. (3.2mm) O.D. X 0.062 in. (1.57 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026806
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/8 in. - (3.2 mm)

info

186002805 - Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, 1 mL Volume, 100/pkg

Part Number: 186002805

For more information on the complete line of Waters vials, please download Waters latest brochure on vials and accessories.

186002805 - Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, 1 mL Volume, 100/pkg
Part Number: 186002805
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2695
Certified Not Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Total Recovery Vial
GlassType Clear Glass
Units in Package 100/pkg
Volume Capacity 1 mL