Product Listing:  WAT060042 - Drawoff Valve   to   WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg

Sorted by Price
  Product    
info

WAT060042 - Drawoff Valve

Part Number: WAT060042

The Drawoff Valve allows one to draw eluent from a solvent reservoir to help with priming or purging the pump.

WAT060042 - Drawoff Valve
Part Number: WAT060042
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Pumps
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump

info

WAT060495 - Inlet Check Valve Rebuild Kit

Part Number: WAT060495

Assemble and replace valves yourself at significant cost savings over pre-assembled check valves with this easy-to-use kit. Valve rebuild kits contain all the necessary parts and instructions for replacing worn valves. The ball and seat inlet check valve rebuild kit contains a ball and seat cartridge, gaskets, and comprehensive instructions.

WAT060495 - Inlet Check Valve Rebuild Kit
Part Number: WAT060495
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Systems
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1
Replacement Schedule As Needed

info

WAT062079 - Steel Column Heater 600

Part Number: WAT062079

The optional stainless steel column heater fits into the slide-out drawer of the 600 fluid handling unit and accomodates a single column up to 30cm in length.

WAT062079 - Steel Column Heater 600
Part Number: WAT062079
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Pumps
Products 600 MultiSolvent Delivery System
Replacement Schedule As Needed

info

WAT062341 - Solvent Bottle Caps, 4L, 4/Pkg

Part Number: WAT062341

The four liter Solvent Bottle Cap is a polyethylene cap that prevents free exchange of atmospheric gasses with helium, but will not sustain an internal pressure build-up.The three-holed cap can accomodate a helium inlet line, helium exhaust line, and a solvent inlet line.

WAT062341 - Solvent Bottle Caps, 4L, 4/Pkg
Part Number: WAT062341
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Pumps
Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
626 LC System

info

WAT062479 - Bottle Caps, 1L, 4/Pkg

Part Number: WAT062479

The one liter Solvent Bottle Cap is a polyethylene cap that prevents free exchange of atmospheric gasses with helium, but will not sustain an internal pressure build-up.The three-holed cap can accomodate a helium inlet line, helium exhaust line, and a solvent inlet line.

WAT062479 - Bottle Caps, 1L, 4/Pkg
Part Number: WAT062479
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Pumps
Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
626 LC System

info

WAT073109 - Syringe, 250µL (Standard)

Part Number: WAT073109

This autosampler syringe is manufactured with tight specifications in barrel size, shape, and wall smoothness for maximum accuracy and consistency in injection volume. The syringe features a plunger seal that is designed specifically for the Waters autosampler, and a top seal made of a unique material that ensures a reliable seal in the manifold and a leak-free connection. This syringe is used in Waters 717 Autosampler and in the 2690/2695, 2690D/2695D Separations Module, as well as the LC Module 1 system.

WAT073109 - Syringe, 250µL (Standard)
Part Number: WAT073109
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
LC Module 1

info

WAT073571 - Rheodyne, Prep Injector Valve

Part Number: WAT073571

This spare part is part of the Preparative Chromatography Rack for the 25X5 series of pumps.

WAT073571 - Rheodyne, Prep Injector Valve
Part Number: WAT073571
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category Injectors
Pumps
Products 2545 Quaternary Gradient Pump
FlexInject Manual Dual Injector Module
Rheodyne Injector
Replacement Schedule As Needed

info

WAT079731 - FEP/Tygon Tubing, 50ft.

Part Number: WAT079731

One end of the FEP-lined Tygon Tubing attaches to the vent fitting at the back of the in-line degasser. Place the other end of the tubing in a waste container in the venting outlet. The container catches any incidental leaks or condensates from the in-line degasser.

WAT079731 - FEP/Tygon Tubing, 50ft.
Part Number: WAT079731
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Systems Components
Products In-Line Degasser

info

WAT080443 - Battery, Lithium

Part Number: WAT080443

The 3V lithium battery is found on the CPU board and backs up the static RAM. The battery is not rechargeable but is easily replaced.

WAT080443 - Battery, Lithium
Part Number: WAT080443
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Detectors
Injectors
Separations Module
Products 2487 Dual Wavelength Absorbance Detector
2690 Separations Module
2690D Dissolution Separations Module
2790 Separations Module
486 Tunable UV/Visible Absorbance Detector
Replacement Schedule As Needed

info

WAT080733 - Analytical Flow Cell, 10mm

Part Number: WAT080733

The Analytical Flow Cell Assembly for the 486 detector has a 10mm path length and a pressure limit of 1000psi.

WAT080733 - Analytical Flow Cell, 10mm
Part Number: WAT080733
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 486 Tunable UV/Visible Absorbance Detector

info

WAT081157 - Inert Taper Slit Flow Cell

Part Number: WAT081157

The Waters®TaperSlit™ Flow Cell design used in the 2487 detector renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® Inert TaperSlit™ Flow Cell, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The Inert Cell has a 10mm path length and a cell volume of 10µL.

WAT081157 - Inert Taper Slit Flow Cell
Part Number: WAT081157
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector

info

WAT081158 - Semi-Prep Taper Slit Flow Cell

Part Number: WAT081158

The Waters®TaperSlit™ Flow Cell design used in the 2487 detector renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® Semi-Prep TaperSlit™ Flow Cell, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The Semi-Prep Cell has a 3mm path length and a cell volume of 2.6µL.

WAT081158 - Semi-Prep Taper Slit Flow Cell
Part Number: WAT081158
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector

info

WAT082823 - Gradient Proportioning Valve

Part Number: WAT082823

The Gradient Proportioning Valve Assembly is a set of four 2-way valves, which features opening and closing rates and aperture sizes of an exceptionally tight tolerance. The four inlet valves are actuated by solenoids that have precise electrical characteristics to help reduce heat buildup and protect the system from outgassing. The gradient proportioning valve provides exact, reproducible mixing of up to four different solvents.

WAT082823 - Gradient Proportioning Valve
Part Number: WAT082823
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Pumps
Products PrepLC 4000
Replacement Schedule No

info

WAT084560 - Inline Precolumn Filter Kit

Part Number: WAT084560

The In-Line Precolumn Filter is a 2µm filter that is placed before the column to help extend the life and preserve the chemistry of the column.

WAT084560 - Inline Precolumn Filter Kit
Part Number: WAT084560
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Systems
Products LC Module 1
Replacement Schedule As Needed

info

WAT096225 - Sample Loop, 50 uL

Part Number: WAT096225

The 50µL Sample Loop is one of the larger sample loops used in the Rheodyne injector.

WAT096225 - Sample Loop, 50 uL
Part Number: WAT096225
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category Injectors
Products Rheodyne Injector

info

WAT270868 - I/O Connector Plug, 12 pin

Part Number: WAT270868

The I/O Connector Plug is a removable connector found on the back of the instrument that holds the 12 pins for the input/output signals.

WAT270868 - I/O Connector Plug, 12 pin
Part Number: WAT270868
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category ACQUITY
Capillary LC
Detectors
Pumps
Separations Module
nanoACQUITY
Products 1515 HPLC Pump
1525 HPLC Pump
2410 Differential Refractive Index Detector
2487 Dual Wavelength Absorbance Detector
2488 Multichannel UV/Vis Detector
2690 Separations Module
2690D Dissolution Separations Module
2790 Separations Module
ACQUITY UPLC Binary Solvent Manager
CapLC 2487
CapLC System
CapLC XE System
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule No

info

WAT270872 - Plunger Seal-Wash Option Kit

Part Number: WAT270872

The Plunger Seal Wash Option Kit includes: two Seal Wash Plunger Seals, four Seal Wash Tube Seals, one Solenoid Pump , two 1/8in.Tefzel Ferrules, two 1/8in. Peek Compression Screws, Tubing, .062 Id x 120 OD 175in. , one Diffuser Assembly. one Shrink Marker, and two Seal Wash Face Seals.

WAT270872 - Plunger Seal-Wash Option Kit
Part Number: WAT270872
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Replacement Schedule No

info

WAT270926 - Seal Wash Pump Solenoid

Part Number: WAT270926

This spare part is a Waters Quality part.

WAT270926 - Seal Wash Pump Solenoid
Part Number: WAT270926
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
ACQUITY H-Class Quaternary Solvent Manager
Replacement Schedule As Needed

info

WAT270927 - 2690 GPV Assembly

Part Number: WAT270927

This spare part is a Waters Quality part.

WAT270927 - 2690 GPV Assembly
Part Number: WAT270927
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

WAT270938 - Plunger Seals Replacement Kit (Std-Yellow) 2/Pkg

Part Number: WAT270938

Designed specifically for Waters® Alliance Solvent Management Systems, these standard plunger seals are made from a Waters proprietary material and are the best choice for most applications.

WAT270938 - Plunger Seals Replacement Kit (Std-Yellow) 2/Pkg
Part Number: WAT270938
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems
Replacement Schedule Annually

info

WAT270939 - Face Seals Replacement Kit 4/Pkg

Part Number: WAT270939

The Face Seal is made from a proprietary material available only from Waters®. It is used on the 2690/2695, 2690D/2695D and 2790/2790 Separations Modules, and the GPC 2000 System

WAT270939 - Face Seals Replacement Kit 4/Pkg
Part Number: WAT270939
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems

info

WAT270940 - Wash Tube Seal Replacement Kit, 4/Pkg

Part Number: WAT270940

These seals are integral to the solvent management system of your 2690 and 2790 Separations Modules. As part of the seal wash system, they help ensure that plunger seal life is maximized.

WAT270940 - Wash Tube Seal Replacement Kit, 4/Pkg
Part Number: WAT270940
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT270941 - Check Valve Cartridge Replacement Kit 2/Pkg

Part Number: WAT270941

Integral to the 2690/2695 and 2790/2795 Separations Modules, these cartridges are critical to the overall performance of the Alliance® system, and ensure long life, low internal volume, and quick response to flow changes.

WAT270941 - Check Valve Cartridge Replacement Kit 2/Pkg
Part Number: WAT270941
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems
Replacement Schedule As Needed

info

WAT270944 - 2690/95 PERFORMANCE MAINTENANCE KIT

Part Number: WAT270944

The Waters® Performance Maintenance Kit for the 2690 Separations Module contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: one diffuser assembly, one filter insert assembly, four stainless steel solvent filters, four face seals, 2 fluoroloy seals, one syringe, one compression screw, one sealwash injector tube, one needlewash frit, five sealwash tubes, two seals, one spacer, two plungers, one teflon washer, two plunger seal wash, one lithium battery, one needle wash filter, one filter retainer, thin walled teflon tubing, two check valve cartridge assemblies, powder-free gloves, one injector needle and one injector needle ferrule.

WAT270944 - 2690/95 PERFORMANCE MAINTENANCE KIT
Part Number: WAT270944
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
Replacement Schedule Annually

info

WAT270945 - Carousel Carrier, 5 Carousel Positions

Part Number: WAT270945

The Carousel Carrier has 5 positions for 5 different color-coded carousels in the 2690/2695 and 2690D/2695D Separations Modules.

WAT270945 - Carousel Carrier, 5 Carousel Positions
Part Number: WAT270945
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

WAT270965 - Prime/Vent Valve

Part Number: WAT270965

The Prime/Vent Valve receives flow from the system pressure transducer outlet. Then, from the vent valve, flow continues into an in-line filter.

WAT270965 - Prime/Vent Valve
Part Number: WAT270965
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems

info

WAT270966 - Pressure Transducer

Part Number: WAT270966

The strain gauge transducer is the most advanced and reliable pressure-detection device in the industry today. As compared with the Bourdon tube transducer, it offers enhanced accuracy and linearity and contains no light bulbs or moving parts to fail. This strain gauge transducer is used in the 515 HPLC Pump as well as the 2690, 2690D, and 2790 Separations Modules.

WAT270966 - Pressure Transducer
Part Number: WAT270966
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Pumps
Separations Module
Products 1515 HPLC Pump
1525 HPLC Pump
2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
515 HPLC Pump
Replacement Schedule As Needed

info

WAT270986 - Standard Flow Inlet Tubing Assembly

Part Number: WAT270986

The Standard Flow Inlet Tubing Assembly is 0.030in ID stainless steel tubing and is surrounded by blackTeflon tubing.

WAT270986 - Standard Flow Inlet Tubing Assembly
Part Number: WAT270986
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT271017 - Seal Wash Face Seal Kit,1/Pkg

Part Number: WAT271017

Integral to the 2690 and 2790 Separations Modules, these seals are part of the seal wash system and help ensure that plunger seal life is maximized.

WAT271017 - Seal Wash Face Seal Kit,1/Pkg
Part Number: WAT271017
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems

info

WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg

Part Number: WAT271018

Integral to the 2690 and 2790 Separations Modules, these seals are part of the seal wash system and help ensure that plunger seal life is maximized.

WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg
Part Number: WAT271018
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems