Product Listing:  PSL404219 - Aluminum, Crimp Cap and PTFE/silicone Septum, 100/pkg   to   WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE

Sorted by Price
  Product    
info

PSL404219 - Aluminum, Crimp Cap and PTFE/silicone Septum, 100/pkg

Part Number: PSL404219

For more information on the complete line of Waters vials, please download Waters latest brochure on vials and accessories.

PSL404219 - Aluminum, Crimp Cap and PTFE/silicone Septum, 100/pkg
Part Number: PSL404219
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Certified Not Certified
Closure Type Crimp
Color Aluminum
Format Cap and PTFE/silicone Septum
Units in Package 100/pkg

info

PSL404231 - Aluminum, Crimp Cap and PTFE/silicone/PTFE Septum, 100/pkg

Part Number: PSL404231

For more information on the complete line of Waters vials, please download Waters latest brochure on vials and accessories.

PSL404231 - Aluminum, Crimp Cap and PTFE/silicone/PTFE Septum, 100/pkg
Part Number: PSL404231
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Certified Not Certified
Closure Type Crimp
Color Aluminum
Format Cap and PTFE/silicone/PTFE Septum
Units in Package 100/pkg

info PSL613301 - Male Nut PEEK, Knurled Head
Part Number: PSL613301
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

PSL613302 - PEEK Double Tight Ferrule

Part Number: PSL613302
PSL613302 - PEEK Double Tight Ferrule
Part Number: PSL613302
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info PSL613312 - PEEK Union with 2 PEEK Fingertight Nuts and Double Ferrules 1/16in.
Part Number: PSL613312
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info PSL613316 - PEEK Two piece Fingertight Fittings, 1/16in, 10-32 Thread 0.125in/0.235in
Part Number: PSL613316
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

PSL613321 - PEEK STARTER KIT (NUTS/FER/FIT)

Part Number: PSL613321

By Replacing stainless steel parts such as tubings, fittings, ferrules, mobile phase filters, in-line filters, etc. you are creating a biocompatible and metallic-free environment for your samples and mobile phase. The PEEK Starter Kit is a collection of items we believe is a good start for everybody working in the field of biochromatography. Each Kit is supplied in a sturdy plastic case. The Kit contains the following items: PEEK Fingertight One-Piece (6), PEEK Handtight Nut (4), PEEK Hex-Head Nut (4), PEEK Double Ferrules (20), PEEK Tubing 1/16 x 0.25mm (1 x 3m), PEEK Tubing 1/16 x 0.50mm (1 x 3m), PEEK Union (1), Elbow 90 Degrees (2), Elbow 180 Degrees (2), Guillotine Cutter (1), PAT™ Mobile Phase Filter - Last Drop (1)

PSL613321 - PEEK STARTER KIT (NUTS/FER/FIT)
Part Number: PSL613321
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category PEEK
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info PSL613324 - PEEK Fittings with Double Ferrules, 1/16in, 10-32 Thread 1/4in/0.605
Part Number: PSL613324
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

PSL613570 - Solvent Inlet Filter 10µm 1/16in OD

Part Number: PSL613570

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

PSL613570 - Solvent Inlet Filter 10µm 1/16in OD
Part Number: PSL613570
Products > Chromatography Consumables & Columns > Accessories > Mobile Phase Filters

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

info

PSL613609 - Solvent Inlet Filter 10µm 1/8in OD

Part Number: PSL613609

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

PSL613609 - Solvent Inlet Filter 10µm 1/8in OD
Part Number: PSL613609
Products > Chromatography Consumables & Columns > Accessories > Mobile Phase Filters

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

info

PSL618001 - SLIPFREE CONN/DOUBLE 6CM 0.005in i.d

Part Number: PSL618001

SLIPFREE™ Connectors guarantee a void-free connection because it pushes the tubing into the end-fitting for a perfect seal every time. They are fingertight to 10,000 PSI and never need wrenches. They automatically readjust to any style column endfittings and are compatible with with all commercially available columns we have tested. The stainless steel thread design offers great stability and no particle generation which could plug your system. They come in a wide variety of styles, lenghts and tubing i.d's to accomodate your particular application needs

PSL618001 - SLIPFREE CONN/DOUBLE 6CM 0.005in i.d
Part Number: PSL618001
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category SLIPFREE® Connectors
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

PSS830008 - In Line Guard Cartridge Holder Kit for 4.6x10mm Guards

Part Number: PSS830008

Inline holder kit to be used 4.6x10mm guards

PSS830008 - In Line Guard Cartridge Holder Kit for 4.6x10mm Guards
Part Number: PSS830008
Products > Chromatography Consumables & Columns > Accessories

Inline holder kit to be used 4.6x10mm guards

info

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg

Part Number: WAT005137

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Part Number: WAT005137
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

info WAT010001 - PREP C18 55-105 UM 125A 1KG
Part Number: WAT010001
Products > Chromatography Consumables & Columns > Accessories

info

WAT010873 - SAM I Reagent

Part Number: WAT010873

Waters SAM Reagent 1 is designed to separate sugars and related compounds using Waters Silica-Pak chromatographic cartridges. This reagent provides fast separations of high loads of sugars and withstands crude sample applications which can soon poison other sugar separations columns. Recirculation of mobile phase allows efficient and economical use of Waters Sam Reagent. Waters Sam Reagent 1 is particularly recommended for the separations of the following mixtures of sugars: -Fructose, Glucose, Sucrose, Maltose, and Lactose. -Lactose and Lactulose -Isomaltose and Maltose -Xylose and Xylulose Enclosed are five-twenty milliliter bottles containing enough reagent to make five liters of mobile phase or 1/2 liter of pre-treatment solution.

WAT010873 - SAM I Reagent
Part Number: WAT010873
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

WAT011578 - Polyethylene Oxide Standard 79,000

Part Number: WAT011578

An individual GPC standards (Gel Permeation Chromatography standards) for molecular weight determination. Polyethylene Oxide Standard at 79,000 Da

WAT011578 - Polyethylene Oxide Standard 79,000
Part Number: WAT011578
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Chemical and Environmental Analysis Standards > GPC & GFC Standards
Applications Life Science
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System HPLC -UV

info

WAT022330 - Ferrule, 1/16, annealed

Part Number: WAT022330

This is a standard stainless steel ferrule.

WAT022330 - Ferrule, 1/16, annealed
Part Number: WAT022330
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022384 - 1/16in. OD S.S. Tubing Cutter w/3 Blades

Part Number: WAT022384

The tubing cutter scores the outer diameter of 1/16 inch OD stainless steel tubing, making it easier to break apart the tubing. A straight, clean cut is of utmost importance when cutting stainless steel tubing. If the tubing is jagged or bent, it makes it difficult to fit the ferrule onto the tubing and will result in either bandspreading or dead volume.

WAT022384 - 1/16in. OD S.S. Tubing Cutter w/3 Blades
Part Number: WAT022384
Products > Chromatography Consumables & Columns > Accessories > Tubing

The tubing cutter scores the outer diameter of 1/16 inch OD stainless steel tubing, making it easier to break apart the tubing. A straight, clean cut is of utmost importance when cutting stainless steel tubing. If the tubing is jagged or bent, it makes it difficult to fit the ferrule onto the tubing and will result in either bandspreading or dead volume.

info

WAT022441 - PREPLC 40MM ASSEMBLY

Part Number: WAT022441
WAT022441 - PREPLC 40MM ASSEMBLY
Part Number: WAT022441
Products > Chromatography Consumables & Columns > Accessories > Radial Compression

info

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg

Part Number: WAT022479

These vials with come pre-assembled for use in dissolution systems.

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg
Part Number: WAT022479
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Clear Glass
Units in Package 500/pkg
Volume Capacity 1 mL

info

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022995

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022995
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.005 in. (0.127 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022997 - Tubing, 1/16" (1.6mm) O.D. X 0.015" (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022997

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022997 - Tubing, 1/16" (1.6mm) O.D. X 0.015" (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022997
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK

info

WAT022999 - Peek Tubing and Fitting Kit

Part Number: WAT022999

The PEEK Tubing and Fitting Kit includes the following: 12 PEEK ferrules, 6 compression screws 10-32 long, 6 compression screws 10-32 short, one PEEK tubing .005in. x 1/16in. x 60in., one PEEK tubing .010in. x 1/16in. x 60in., and 12 compression screw knobs

WAT022999 - Peek Tubing and Fitting Kit
Part Number: WAT022999
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK Tubing
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info WAT023401 - Kalrez Replacement O-ring, 2/pkg
Part Number: WAT023401
Products > Chromatography Consumables & Columns > Accessories

info

WAT025604 - Compression Screws and Ferrules, 5/Pkg

Part Number: WAT025604

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which could damage valves and block columns.

WAT025604 - Compression Screws and Ferrules, 5/Pkg
Part Number: WAT025604
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026-04 - PEEK Union, 1/16 in.

Part Number: WAT026-04

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which can damage valves and block columns, thereby increasing maintenance costs.

WAT026-04 - PEEK Union, 1/16 in.
Part Number: WAT026-04
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026804 - Tubing, 1/16 in. (1.6mm) O.D. X 0.020 in. (0.508 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026804

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026804 - Tubing, 1/16 in. (1.6mm) O.D. X 0.020 in. (0.508 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026804
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.020 in. (0.508 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026805

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026805
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.040 in. (1.02 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026806 - Tubing, 1/8 in. (3.2mm) O.D. X 0.062 in. (1.57 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026806

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026806 - Tubing, 1/8 in. (3.2mm) O.D. X 0.062 in. (1.57 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026806
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/8 in. - (3.2 mm)

info

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE

Part Number: WAT026808

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE
Part Number: WAT026808
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 25 ft (7.6 m)
Material of Construction PTFE
Outside Diameter 0.125 in. (3.17 mm)