Product Listing:  WAS290423 - Fuse, lamp power supply (2 Amp, micro (F1 and F2 on CPU)   to   700005997 - Sample Cone - 0.5mm

Sorted by Brand
  Product    
info

WAS290423 - Fuse, lamp power supply (2 Amp, micro (F1 and F2 on CPU)

Part Number: WAS290423

This spare part is a Waters Quality part

WAS290423 - Fuse, lamp power supply (2 Amp, micro (F1 and F2 on CPU)
Part Number: WAS290423
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector

info

WAS207069 - Assembly, Plunger

Part Number: WAS207069

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances minimize the wear of the plunger seal, while alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts while safeguarding pump flow rates and system retention times.

WAS207069 - Assembly, Plunger
Part Number: WAS207069
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
Replacement Schedule Annually

info

WAS207006 - Assembly, Pump Head (w/check valves)

Part Number: WAS207006

An integral part of the Waters 1515 and 500 series pumps, the Pump Head Assembly is made from the highest quality stainless steel and comes complete with the inlet/outlet check valve and the Clear-100 Plunger Seal already installed. The Pump Head is rigorously tested for supperior performance.

WAS207006 - Assembly, Pump Head (w/check valves)
Part Number: WAS207006
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
Replacement Schedule As Needed

info

WAS081346 - 10 mm Flow Cell Rebuild Kit

Part Number: WAS081346

The 10mm Flow Cell Rebuild Kit contains the following parts: two lens screws, one entrance lens washer, one entrance lens (curved), ten gaskets, one exit window (flat), one exit lens washer, one cuvette lens screw, one cuvette lens, and one cuvette lens holder.

WAS081346 - 10 mm Flow Cell Rebuild Kit
Part Number: WAS081346
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector
Replacement Schedule As Needed

info

WAS081333 - Cuvette Holder Assembly

Part Number: WAS081333

The 2487/2489 detectors use a standard 10mm path length spectophotometric cell (quartz cuvette). The cuvette is inserted with the frosted sides facing up and down in the cuvette holder when placing it into the detector flow cell assembly. Fingerprints on the clear quartz sides interfere with the light path and compromise the integrity of the cuvette scanning operations. Since the cuvette scan is aquired by measuring the absorbances from a light path that includes both the flow cell and the cuvette, the solvent conditions in the flow cell should be identical for both the zero scan and the sample scan

WAS081333 - Cuvette Holder Assembly
Part Number: WAS081333
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector

info

WAS081140 - Analytical Flow Cell

Part Number: WAS081140

The Waters®TaperSlit™ Flow Cell design used in the 2487/2489 detectors renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® Analytical TaperSlit™ FlowCell, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The analytical cell has a 10mm path length and a cell volume of 10µL.

WAS081140 - Analytical Flow Cell
Part Number: WAS081140
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector

info

WAS073703 - Sample Loop, 5mL, SS

Part Number: WAS073703

This spare part is part of the Preparative Chromatography Rack for the 25X5 series of pumps.

WAS073703 - Sample Loop, 5mL, SS
Part Number: WAS073703
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category Injectors
Pumps
Products 2545 Quaternary Gradient Pump
FlexInject Manual Dual Injector Module
PrepLC 4000
Replacement Schedule As Needed

info

M960287AD1 - Slit Plate, 0.25mm Slit

Part Number: M960287AD1

Slit Plate Support for Outer Source Assembly, St. Stl.

M960287AD1 - Slit Plate, 0.25mm Slit
Part Number: M960287AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products GCT Mass Spectrometer
GCT Premier Mass Spectrometer
Replacement Schedule As Needed

info

M956358AD1 - Capillary Tube

Part Number: M956358AD1

This spare part is a Waters Quality part

M956358AD1 - Capillary Tube
Part Number: M956358AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products LCT Premier
LCT Premier XE
Q-Tof Premier Mass Spectrometer
SYNAPT™ MS
Synapt High Definition MS System™
Replacement Schedule As Needed

info

M956315DC1 - ESI Probe Assembly

Part Number: M956315DC1

ESI Probe Assembly

M956315DC1 - ESI Probe Assembly
Part Number: M956315DC1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Mass Spectrometry
Products Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Replacement Schedule As Needed

info

M956232AD1-S - Nanoflow Probe Tip, thin wall, 10/pkg

Part Number: M956232AD1-S

This spare part is a Waters Quality part

M956232AD1-S - Nanoflow Probe Tip, thin wall, 10/pkg
Part Number: M956232AD1-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products Q-Tof II Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Q-Tof micro Mass Spectrometer
Replacement Schedule As Needed

info

M956076BC1 - APcI Ion Sabre Probe Heater Assembly

Part Number: M956076BC1

This is a spare APCI Ion Sabre probe heater element.

M956076BC1 - APcI Ion Sabre Probe Heater Assembly
Part Number: M956076BC1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category MS Accessories
Mass Spectrometry
Products APPI Option
Ion Sabre Option
Q-Tof API US Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro Mass Spectrometer
Replacement Schedule As Needed

info

M880675CD1-S - Target Plate, MALDI

Part Number: M880675CD1-S

This Target plate is used in the Q-Tof Premier MALDI, the Q-Tof Ultima MALDI, and the MALDI SYNAPT HDMS/MS Systems.

M880675CD1-S - Target Plate, MALDI
Part Number: M880675CD1-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Mass Spectrometry
Products MALDI LR Mass Spectometer
MALDI SYNAPT HDMS Mass Spectrometer
MALDI SYNAPT MS Mass Spectrometer
MALDI micro MX Mass Spectrometer
Q-Tof Premier MALDI Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Replacement Schedule As Needed

info

725000145 - Collection Rack, Eppendorf Tubes (120)

Part Number: 725000145

The optional Eppendorf tube rack replaces the standard tube rack. It allows collection of samples into 1.5mL Eppendorf tubes. The rack can hold 120 tubes.

725000145 - Collection Rack, Eppendorf Tubes (120)
Part Number: 725000145
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Systems Components
Products Waters Fraction Collector II
Waters Fraction Collector III
Replacement Schedule No

info

725000142 - Diverter Valve (standard)

Part Number: 725000142

The standard Diverter Valve (three-way valve) diverts the flow of solvent to a waste vessel as the dropper assembly moves between collection vessel positions.

725000142 - Diverter Valve (standard)
Part Number: 725000142
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Systems Components
Products Waters Fraction Collector II
Waters Fraction Collector III
Replacement Schedule As Needed

info

700011138 - Synthetic Vacuum Pump Oil

Part Number: 700011138

Synthetic Vacuum Pump Oil

700011138 - Synthetic Vacuum Pump Oil
Part Number: 700011138
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Vacuum fittings/components
Product Category Mass Spectrometry
Products SQ Detector 2
SYNAPT G2-Si
Single Quad Detector
Tandem Quadrupole Detector
Xevo G2-XS QTof
Xevo TQ-S MS
Xevo TQ-S micro
Xevo TQD
Replacement Schedule As Needed

info

700011047 - Vial Holder, 48-well, 2mL vial

Part Number: 700011047

The original part number was 405003743 and it was changed to part number 700011047.

700011047 - Vial Holder, 48-well, 2mL vial
Part Number: 700011047
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Bio Sample Manager-Flow Through Needle
ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
ACQUITY UPLC Sample Manager
ACQUITY UPLC Sample Organizer
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

700010196 - Solvent Filter, Thru Tube, 316SS

Part Number: 700010196

ACQUITY ISM Solvent Filter, Thru Tube, 316SS

700010196 - Solvent Filter, Thru Tube, 316SS
Part Number: 700010196
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Filters
Product Category ACQUITY
Products ACQUTY Isocratic Solvent Manager
Replacement Schedule As Needed

info

700010155 - Adapter, Straight, 6mm - 1/4-inch

Part Number: 700010155

This spare part is a Waters Quality part

700010155 - Adapter, Straight, 6mm - 1/4-inch
Part Number: 700010155
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Detectors
Products ACQUITY QDa Detector
Replacement Schedule As Needed

info

700009711 - Fitting, 1/8 NPT Male, Female, PEEK

Part Number: 700009711

This spare part is a Waters Quality part

700009711 - Fitting, 1/8 NPT Male, Female, PEEK
Part Number: 700009711
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Detectors
Products ACQUITY QDa Detector
Replacement Schedule As Needed

info

700009560 - Tube, .004 ID, Col Conn, Long

Part Number: 700009560

ACQUITY APC CM-S Column Connector Tube, Long, .004ID

700009560 - Tube, .004 ID, Col Conn, Long
Part Number: 700009560
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY APC CM-S
Replacement Schedule As Needed

info

700009087 - Sample Cone, Xevo G2 (-S/XS)

Part Number: 700009087

Sample Cone, aperture diameter 0.67mm, St. Stl.

700009087 - Sample Cone, Xevo G2 (-S/XS)
Part Number: 700009087
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SPECVALUE134881948
Xevo G2-S
Replacement Schedule As Needed

info

700008977 - Assy Needle 15µL w/guide and seat 18KPSI

Part Number: 700008977

ACQUITY I-Class FTN Needle Assembly, 15µL w/guide and seat 18KPSI

700008977 - Assy Needle 15µL w/guide and seat 18KPSI
Part Number: 700008977
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Needles
Product Category ACQUITY
Products ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

700008931 - Capillary Tube

Part Number: 700008931

Stainless Steel Capillary Tube

700008931 - Capillary Tube
Part Number: 700008931
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products SYNAPT G2 MS System
SYNAPT G2-S
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

700008869 - Welded Tube Assy, SS, .003 ID X 14.5 LG

Part Number: 700008869

ACQUITY Welded Tube Assy, SS, .003 ID X 14.5 long

700008869 - Welded Tube Assy, SS, .003 ID X 14.5 LG
Part Number: 700008869
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY I-Class BSM
Replacement Schedule As Needed

info

700007341 - Holder, 3/8 DIA 1/2-28 x 1/16 V Chk Vlv

Part Number: 700007341

This spare part is a Waters Quality part

700007341 - Holder, 3/8 DIA 1/2-28 x 1/16 V Chk Vlv
Part Number: 700007341
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category SFC
Products Fluid Delivery Module (FDM-10)
Fluid Delivery Module (FDM-30)
Replacement Schedule As Needed

info

700007286 - Fitting, 1/4-28 U PEEK Bulkhead Union

Part Number: 700007286

This spare part is a Waters Quality part

700007286 - Fitting, 1/4-28 U PEEK Bulkhead Union
Part Number: 700007286
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category SFC
Products Fluid Delivery Module (FDM-10)
Fluid Delivery Module (FDM-30)
Replacement Schedule As Needed

info

700006069 - Injection Valve Cartridge, Full Loop (18 KPSI)

Part Number: 700006069

ACQUITY I-Class FL Injection Valve Cartridge, 18 KPSI

700006069 - Injection Valve Cartridge, Full Loop (18 KPSI)
Part Number: 700006069
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category ACQUITY
Products ACQUITY I-Class SM-FL
Replacement Schedule As Needed

info

700006057 - Injector Cartridge, FTN, 18 KPSI

Part Number: 700006057

ACQUITY I-Class FTN Injector Cartridge, 18 KPSI

700006057 - Injector Cartridge, FTN, 18 KPSI
Part Number: 700006057
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category ACQUITY
Products ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

700005997 - Sample Cone - 0.5mm

Part Number: 700005997

Sample Cone 0.5mm aperture

700005997 - Sample Cone - 0.5mm
Part Number: 700005997
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SQ Detector 2
Xevo TQD
Replacement Schedule As Needed