Product Listing:  WAT045438 - High Pressure Motorized Valve Assembly   to   M960287AD1 - Slit Plate, 0.25mm Slit

Sorted by Brand
  Product    
info

WAT045438 - High Pressure Motorized Valve Assembly

Part Number: WAT045438

The High Pressure Motorized Valve (HPMV) is a three-way valve that has two common ports and one controllable port. The HPMV is used in two of the three valve positions in the Fluids Pak: V1 (High Pressure Inject Valve) and V2 (High Pressure Syringe Valve). The basic valve is driven by a stepper motor.

WAT045438 - High Pressure Motorized Valve Assembly
Part Number: WAT045438
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Injectors
Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
LC Module 1
Replacement Schedule As Needed

info

WAT045427 - HPMV Tool Kit

Part Number: WAT045427

This kit contains the special tools required to install the seals that came in the HP Valve Rebuild Kit (WAT045424). The kit contains the following tools: seal punch, seal guide, wood screw.

WAT045427 - HPMV Tool Kit
Part Number: WAT045427
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category Injectors
Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
Replacement Schedule No

info

WAT045424 - High Pressure Motorized Valve Rebuild Kit

Part Number: WAT045424

The high pressure valve rebuild kit contains all of the Waters Quality Parts® required to fully rebuild the valves of the Waters® 717/717 Plus Autosampler, 2690/2695 Separations Modules, 2690D/2695D Separations Modules and LC Module 1 system. The spool is crafted to precise hardness, smoothness, and alignment specifications. The high-pressure valve seals are made of proprietary materials and then packed in anti-static bags to further minimize the chance of particulate contamination. The rebuild kit contains a PTFE O-ring, seal, spool, high pressure seals, and comprehensive instructions.

WAT045424 - High Pressure Motorized Valve Rebuild Kit
Part Number: WAT045424
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Injectors
Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
717/717 Plus Autosampler
LC Module 1
Replacement Schedule As Needed

info

WAT045400 - Strain Gauge Transducer Assembly

Part Number: WAT045400

The strain gauge transducer is the most advanced and reliable pressure-detection device in the industry today. As compared with the Bourdon tube transducer, it offers enhanced accuracy and linearity and contains no light bulbs or moving parts to fail.

WAT045400 - Strain Gauge Transducer Assembly
Part Number: WAT045400
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Systems
Products LC Module 1
Replacement Schedule As Needed

info

WAT033679 - Ball and Seat Inlet Check Valve

Part Number: WAT033679

This valve assembly saves installation time and reduces the handling of small parts, as compared with the corresponding valve rebuild kit. The unit offers convenience and ease of installation to users of Waters® 510, 515, and 600 pumps, as well as the LC Module 1 system. All Waters check valves are leak-tested at the factory and assembled in a clean environment to ensure the delivery of a tightly-sealed and reliable part.

WAT033679 - Ball and Seat Inlet Check Valve
Part Number: WAT033679
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Systems
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1
Replacement Schedule As Needed

info

WAT033446 - Rheodyne 9125 PEEK Injector

Part Number: WAT033446

The Rheodyne 9125 PEEK Injector is non-metallic with a Tefzel rotor and a stator made of PEEK. The maximum operating pressure for this injector is 5000psi.

WAT033446 - Rheodyne 9125 PEEK Injector
Part Number: WAT033446
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Pumps
Products 626 LC System
Replacement Schedule No

info

WAT033388 - Needle Luer 22AWG (.006 ID)

Part Number: WAT033388

This spare part is a Waters Quality part.

WAT033388 - Needle Luer 22AWG (.006 ID)
Part Number: WAT033388
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products Rheodyne Injector
Replacement Schedule As Needed

info

WAT033383 - 100µL Syringe, Rheodyne™

Part Number: WAT033383

The 100µL Rheodyne Syringe is a low pressure microsyringe, 2 inches long. 22 Gauge, and has a square end (90°) tip style.

WAT033383 - 100µL Syringe, Rheodyne™
Part Number: WAT033383
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products Rheodyne Injector

info

WAT031870 - Plunger Seal Wash Kit 100µL

Part Number: WAT031870

The Plunger Seal Wash Kit (100µL) contains the following components: one wash seal insert tool, three polypropylene 1/16 in. tee, six adapter fittings, one plunger wash seal 100µL, two retaining rings, one Teflon® tube (10ft).

WAT031870 - Plunger Seal Wash Kit 100µL
Part Number: WAT031870
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Systems
Products 1515 HPLC Pump
1525 HPLC Pump
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1
Replacement Schedule As Needed

info

WAT031795 - PEEK Tubing Cutter

Part Number: WAT031795

Cut PEEK tubing quickly and easily with this versatile tubing cutter.

WAT031795 - PEEK Tubing Cutter
Part Number: WAT031795
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category Systems
Products LC Module 1
Replacement Schedule No

info

WAT026613 - GFP Plunger Seal (Black)

Part Number: WAT026613

Made from high-performance, glass-filled polymer, the GFP Plunger Seal is manufactured with an internal spring that is designed to provide the correct pressure on the plunger, increasing the life of both the sapphire plunger and the seal itself. Waters® has determined that the Clear-100™ Seal is best suited to most applications and is the seal most commonly used in Waters solvent delivery systems and Performance Maintenance Kits. However, the GFP seal may be a better choice in certain applications.

WAT026613 - GFP Plunger Seal (Black)
Part Number: WAT026613
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Systems
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
LC Module 1

info

WAT026016 - Spring Loaded Outlet Check Valve Rebuild Kit

Part Number: WAT026016

Assemble and replace worn valves with this easy-to-use rebuild kit. This kit ensures maximum valve performance and reliability. Components are crafted with tight tolerances for superior quality. The kit contains PTFE seals, actuators, springs, filters, and comprehensive instructions.

WAT026016 - Spring Loaded Outlet Check Valve Rebuild Kit
Part Number: WAT026016
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 510 HPLC Pump
Replacement Schedule As Needed

info

WAT026014 - Outlet Check Valve Rebuild Kit (225µL)

Part Number: WAT026014

Assemble and replace valves yourself at significant cost savings with this easy-to-use kit. Although ball and seat outlet check valves are also available pre-assembled, the rebuild kit gives you the option of self-maintenance at significant cost savings. The Ball and Seat Outlet Check Valve Rebuild Kit contains the ball and seat cartridge, gaskets, and comprehensive instructions. The valve should be replaced every 12 months.

WAT026014 - Outlet Check Valve Rebuild Kit (225µL)
Part Number: WAT026014
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Systems
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1

info

WAT025746 - Reference Valve Rebuild Kit

Part Number: WAT025746

This Reference Valve Rebuild Kit is a simple, cost-effective means for maintaining the reference valve that may have been added as an accessory to your Waters® pump. The kit provides all necessary parts and instructions to rebuild the reference valve and contains a diaphragm, actuator, and comprehensive instructions. The valve should be replaced or rebuilt every 12 months.

WAT025746 - Reference Valve Rebuild Kit
Part Number: WAT025746
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
Replacement Schedule Annually

info

WAT025661 - Lubricating Oil, 150cc

Part Number: WAT025661

The oil lubricates the gears of the pump to ensure a smooth flow of solvent through the pump and then to the rest of the system.

WAT025661 - Lubricating Oil, 150cc
Part Number: WAT025661
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Pumps
Systems
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1

info

WAT025656 - Sapphire Plunger

Part Number: WAT025656

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances minimize the wear of the plunger seal. Careful concentric alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts. Included with the plunger is a pre-mounted C-Clip, which eliminates the need to remount this component.

WAT025656 - Sapphire Plunger
Part Number: WAT025656
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category Pumps
Systems
Products 510 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1

info

WAT025559 - Priming Syringe Needle

Part Number: WAT025559

This hypodermic needle is the correct gauge for this application, and comes with a compression screw and ferrule installed.

WAT025559 - Priming Syringe Needle
Part Number: WAT025559
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Capillary LC
Pumps
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
CapLC System
CapLC XE System

info

WAT025531 - Solvent Reservoir Filter

Part Number: WAT025531

This 10-micron filter protects the system from particulate matter in the solvent bottle. All solvent filters are thoroughly cleaned at Waters® using a nitric acid wash to remove oils and other possible contaminants that can compromise results.

WAT025531 - Solvent Reservoir Filter
Part Number: WAT025531
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Filters
Product Category ACQUITY
Injectors
Pumps
Separations Module
Systems
Products 1515 HPLC Pump
1525 EF HPLC Pump
1525 HPLC Pump
1525 Micro HPLC Pump
2535 Quaternary Gradient Module
2545 Quaternary Gradient Pump
2555 Quaternary Gradient Module
2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2700 Sample Manager
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
ACQUITY UPLC Binary Solvent Manager
Alliance GPC/V 2000 Systems
LC Module 1
Replacement Schedule As Needed

info

WAT025248 - Rheodyne 7725I Manual Injector

Part Number: WAT025248

The Rheodyne 7725I Manual Injector is a stand-alone injector that can be used on the 1525 Micro Binary HPLC Pump.

WAT025248 - Rheodyne 7725I Manual Injector
Part Number: WAT025248
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Injectors
Pumps
Products 1525 Micro HPLC Pump
Rheodyne Injector
Replacement Schedule As Needed

info

WAT022934 - Clear-100™ Plunger Seal

Part Number: WAT022934

Made from a proprietary material, the Clear-100™ Plunger Seals feature an internal spring that provides the correct pressure on the plunger, increasing the life of the sapphire and the seal itself. The Clear-100™ Seal features an exclusive ringed or ribbed design on the inside of the seal, which helps to maintain a snug fit and increases the seal’s durability. The Clear-100™ Seal is best suited to most applications for Waters® Solvent Delivery Systems. It is included in Performance Maintenance Kits.

WAT022934 - Clear-100™ Plunger Seal
Part Number: WAT022934
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Systems
Products 1515 HPLC Pump
1525 HPLC Pump
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1
Replacement Schedule As Needed

info

WAT021817 - Ferrule, 1/16in. OD, PEEK

Part Number: WAT021817

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT021817 - Ferrule, 1/16in. OD, PEEK
Part Number: WAT021817
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Detectors
Injectors
Pumps
Separations Module
Systems
Products 2690D Dissolution Separations Module
2790 Separations Module
626 LC System
996 Photodiode Array Detector
LC Module 1
Rheodyne Injector
Replacement Schedule As Needed

info

WAT005139 - Precolumn Filter Insert Assembly, 5/pkg

Part Number: WAT005139

This is a 2µm replacement filter insert.

WAT005139 - Precolumn Filter Insert Assembly, 5/pkg
Part Number: WAT005139
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Capillary LC
Injectors
Pumps
Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
600 MultiSolvent Delivery System
717/717 Plus Autosampler
Alliance GPC/V 2000 Systems
CapLC System
CapLC XE System
LC Module 1
Replacement Schedule As Needed

info

WAT005081 - Seal, 1.25 x 0.750 x 0.25

Part Number: WAT005081

This spare part is a Waters Quality part.

WAT005081 - Seal, 1.25 x 0.750 x 0.25
Part Number: WAT005081
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Products 1515 HPLC Pump
1525 EF HPLC Pump
1525 Micro HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
626 LC System
Replacement Schedule As Needed

info

WAS290423 - Fuse, lamp power supply (2 Amp, micro (F1 and F2 on CPU)

Part Number: WAS290423

This spare part is a Waters Quality part.

WAS290423 - Fuse, lamp power supply (2 Amp, micro (F1 and F2 on CPU)
Part Number: WAS290423
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector

info

WAS207069 - Assembly, Plunger

Part Number: WAS207069

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances minimize the wear of the plunger seal, while alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts while safeguarding pump flow rates and system retention times.

WAS207069 - Assembly, Plunger
Part Number: WAS207069
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
Replacement Schedule Annually

info

WAS207006 - Assembly, Pump Head (w/check valves)

Part Number: WAS207006

An integral part of the Waters 1515 and 500 series pumps, the Pump Head Assembly is made from the highest quality stainless steel and comes complete with the inlet/outlet check valve and the Clear-100 Plunger Seal already installed. The Pump Head is rigorously tested for supperior performance.

WAS207006 - Assembly, Pump Head (w/check valves)
Part Number: WAS207006
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
Replacement Schedule As Needed

info

WAS081346 - 10 mm Flow Cell Rebuild Kit

Part Number: WAS081346

The 10mm Flow Cell Rebuild Kit contains the following parts: two lens screws, one entrance lens washer, one entrance lens (curved), ten gaskets, one exit window (flat), one exit lens washer, one cuvette lens screw, one cuvette lens, and one cuvette lens holder.

WAS081346 - 10 mm Flow Cell Rebuild Kit
Part Number: WAS081346
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector
Replacement Schedule As Needed

info

WAS081140 - Analytical Flow Cell

Part Number: WAS081140

The Waters®TaperSlit™ Flow Cell design used in the 2487/2489 detectors renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® Analytical TaperSlit™ FlowCell, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The analytical cell has a 10mm path length and a cell volume of 10µL.

WAS081140 - Analytical Flow Cell
Part Number: WAS081140
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector

info

WAS073703 - Sample Loop, 5mL, SS

Part Number: WAS073703

This spare part is part of the Preparative Chromatography Rack for the 25X5 series of pumps.

WAS073703 - Sample Loop, 5mL, SS
Part Number: WAS073703
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category Injectors
Pumps
Products 2545 Quaternary Gradient Pump
FlexInject Manual Dual Injector Module
PrepLC 4000
Replacement Schedule As Needed

info

M960287AD1 - Slit Plate, 0.25mm Slit

Part Number: M960287AD1

Slit Plate Support for Outer Source Assembly, St. Stl.

M960287AD1 - Slit Plate, 0.25mm Slit
Part Number: M960287AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products GCT Mass Spectrometer
GCT Premier Mass Spectrometer
Replacement Schedule As Needed