Product Listing:  WAT035711 - Polyethylene Glycol Standards Kit   to   PSL613316 - PEEK Two piece Fingertight Fittings, 1/16in, 10-32 Thread 0.125in/0.235in

Sorted by Brand
  Product    
info

WAT035711 - Polyethylene Glycol Standards Kit

Part Number: WAT035711

A unique collection of 10 GPC standards (Gel Permeation Chromatography standards) for aqueous molecular weight determination. Polyethylene Glycol Standards Kit 10 Vials, 1.0g in each vial containing the following moleculare weight standards: 100, 200, 400, 600, 1000, 1500, 4300, 7000, 13000, 22000

WAT035711 - Polyethylene Glycol Standards Kit
Part Number: WAT035711
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Chemical and Environmental Analysis Standards > GPC & GFC Standards
Applications Life Science
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System HPLC -UV

info

WAT035708 - Polyisoprene Standards Kit

Part Number: WAT035708

A unique collection of 10 GPC standards (Gel Permeation Chromatography standards) for non-aqueous molecular weight determination. Polyisoprene Standard Kit 10 Vials, 0.5g in each vial containing the following moleculare weight standards: 1000, 3000, 10000, 30000, 70000, 100000, 300000, 500000, 1000000, 3000000

WAT035708 - Polyisoprene Standards Kit
Part Number: WAT035708
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Chemical and Environmental Analysis Standards > GPC & GFC Standards
Applications Chemical
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System HPLC -UV

info

WAT027061 - Porapak Q 100-120 mesh, 26 grams

Part Number: WAT027061

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027061 - Porapak Q 100-120 mesh, 26 grams
Part Number: WAT027061
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

WAT027060 - Porapak Q 80-100 mesh, 26 grams

Part Number: WAT027060

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027060 - Porapak Q 80-100 mesh, 26 grams
Part Number: WAT027060
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

WAT027059 - Porapak Q 50-80 mesh, 26 grams

Part Number: WAT027059

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027059 - Porapak Q 50-80 mesh, 26 grams
Part Number: WAT027059
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

WAT027048 - Porapak N 80-100 mesh, 29 grams

Part Number: WAT027048

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027048 - Porapak N 80-100 mesh, 29 grams
Part Number: WAT027048
Products > Chromatography Consumables & Columns > Accessories
Category All Gas Packings

info

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026973

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026973
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.009 in. (0.23 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE

Part Number: WAT026808

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE
Part Number: WAT026808
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 25 ft (7.6 m)
Material of Construction PTFE
Outside Diameter 0.125 in. (3.17 mm)

info

WAT026806 - Tubing, 1/8 in. (3.2mm) O.D. X 0.062 in. (1.57 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026806

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026806 - Tubing, 1/8 in. (3.2mm) O.D. X 0.062 in. (1.57 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026806
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/8 in. - (3.2 mm)

info

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026805

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026805
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.040 in. (1.02 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026804 - Tubing, 1/16 in. (1.6mm) O.D. X 0.020 in. (0.508 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026804

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026804 - Tubing, 1/16 in. (1.6mm) O.D. X 0.020 in. (0.508 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026804
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.020 in. (0.508 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026-04 - PEEK Union, 1/16 in.

Part Number: WAT026-04

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which can damage valves and block columns, thereby increasing maintenance costs.

WAT026-04 - PEEK Union, 1/16 in.
Part Number: WAT026-04
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT025604 - Compression Screws and Ferrules, 5/Pkg

Part Number: WAT025604

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which could damage valves and block columns.

WAT025604 - Compression Screws and Ferrules, 5/Pkg
Part Number: WAT025604
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022999 - Peek Tubing and Fitting Kit

Part Number: WAT022999

The PEEK Tubing and Fitting Kit includes the following: 12 PEEK ferrules, 6 compression screws 10-32 long, 6 compression screws 10-32 short, one PEEK tubing .005in. x 1/16in. x 60in., one PEEK tubing .010in. x 1/16in. x 60in., and 12 compression screw knobs

WAT022999 - Peek Tubing and Fitting Kit
Part Number: WAT022999
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK Tubing
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022997 - Tubing, 1/16" (1.6mm) O.D. X 0.015" (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022997

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022997 - Tubing, 1/16" (1.6mm) O.D. X 0.015" (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022997
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK

info

WAT022996 - Tubing, 1/16 in. (1.6mm) O.D. X 0.010 in. (0.25 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022996

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system. Part number WAT033391 has been replaced by this new part number WAT022996.

WAT022996 - Tubing, 1/16 in. (1.6mm) O.D. X 0.010 in. (0.25 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022996
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.010 in. (0.25 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022995

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022995
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.005 in. (0.127 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg

Part Number: WAT022479

These vials with come pre-assembled for use in dissolution systems.

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg
Part Number: WAT022479
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Clear Glass
Units in Package 500/pkg
Volume Capacity 1 mL

info

WAT022384 - 1/16in. OD S.S. Tubing Cutter w/3 Blades

Part Number: WAT022384

The tubing cutter scores the outer diameter of 1/16 inch OD stainless steel tubing, making it easier to break apart the tubing. A straight, clean cut is of utmost importance when cutting stainless steel tubing. If the tubing is jagged or bent, it makes it difficult to fit the ferrule onto the tubing and will result in either bandspreading or dead volume.

WAT022384 - 1/16in. OD S.S. Tubing Cutter w/3 Blades
Part Number: WAT022384
Products > Chromatography Consumables & Columns > Accessories > Tubing

The tubing cutter scores the outer diameter of 1/16 inch OD stainless steel tubing, making it easier to break apart the tubing. A straight, clean cut is of utmost importance when cutting stainless steel tubing. If the tubing is jagged or bent, it makes it difficult to fit the ferrule onto the tubing and will result in either bandspreading or dead volume.

info

WAT022330 - Ferrule, 1/16, annealed

Part Number: WAT022330

This is a standard stainless steel ferrule.

WAT022330 - Ferrule, 1/16, annealed
Part Number: WAT022330
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT011576 - Polyethylene Oxide Standard 40,000

Part Number: WAT011576

An individual GPC standard (Gel Permeation Chromatography standards) for molecular weight determination. Polyethylene Oxide Standard at 40,000 Da

WAT011576 - Polyethylene Oxide Standard 40,000
Part Number: WAT011576
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Chemical and Environmental Analysis Standards > GPC & GFC Standards
Applications Life Science
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System HPLC -UV

info

WAT010873 - SAM I Reagent

Part Number: WAT010873

Waters SAM Reagent 1 is designed to separate sugars and related compounds using Waters Silica-Pak chromatographic cartridges. This reagent provides fast separations of high loads of sugars and withstands crude sample applications which can soon poison other sugar separations columns. Recirculation of mobile phase allows efficient and economical use of Waters Sam Reagent. Waters Sam Reagent 1 is particularly recommended for the separations of the following mixtures of sugars: -Fructose, Glucose, Sucrose, Maltose, and Lactose. -Lactose and Lactulose -Isomaltose and Maltose -Xylose and Xylulose Enclosed are five-twenty milliliter bottles containing enough reagent to make five liters of mobile phase or 1/2 liter of pre-treatment solution.

WAT010873 - SAM I Reagent
Part Number: WAT010873
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg

Part Number: WAT005137

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Part Number: WAT005137
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

info

PSL618021 - HANDILOK FITTING

Part Number: PSL618021
PSL618021 - HANDILOK FITTING
Part Number: PSL618021
Products > Chromatography Consumables & Columns > Accessories > Fittings

info

PSL613609 - Solvent Inlet Filter 10µm 1/8in OD

Part Number: PSL613609

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

PSL613609 - Solvent Inlet Filter 10µm 1/8in OD
Part Number: PSL613609
Products > Chromatography Consumables & Columns > Accessories > Mobile Phase Filters

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

info

PSL613608 - Solvent Inlet Filter 10µm 1/8in OD

Part Number: PSL613608

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

PSL613608 - Solvent Inlet Filter 10µm 1/8in OD
Part Number: PSL613608
Products > Chromatography Consumables & Columns > Accessories > Mobile Phase Filters

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

info

PSL613607 - Solvent Inlet Filter 10µm 1/16in OD

Part Number: PSL613607

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

PSL613607 - Solvent Inlet Filter 10µm 1/16in OD
Part Number: PSL613607
Products > Chromatography Consumables & Columns > Accessories > Mobile Phase Filters

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

info

PSL613570 - Solvent Inlet Filter 10µm 1/16in OD

Part Number: PSL613570

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

PSL613570 - Solvent Inlet Filter 10µm 1/16in OD
Part Number: PSL613570
Products > Chromatography Consumables & Columns > Accessories > Mobile Phase Filters

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

info PSL613324 - PEEK Fittings with Double Ferrules, 1/16in, 10-32 Thread 1/4in/0.605
Part Number: PSL613324
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info PSL613316 - PEEK Two piece Fingertight Fittings, 1/16in, 10-32 Thread 0.125in/0.235in
Part Number: PSL613316
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)