Product Listing:  WAT052890 - AccQ-Tag Eluent A   to   186000327DV - Deactivated Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 1.5 mL Volume, 100/pkg

Sorted by Popularity
  Product    
info

WAT052890 - AccQ-Tag Eluent A

Part Number: WAT052890

Amino Acid Analysis (AAA) is required for many applications. AccQ-Tag Eluent A Concentrate is available to purchase separetely in a 1 X 1L format.

WAT052890 - AccQ-Tag Eluent A
Part Number: WAT052890
Brand: AccQ-Tag

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Eluent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

WAT094226 - Oasis HLB 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk

Part Number: WAT094226

The 3 cc Oasis HLB cartridges contain the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent that was developed for the extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT094226 - Oasis HLB 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk
Part Number: WAT094226
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry HLB
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 60 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

WAT015209 - Sugar-Pak I Guard-Pak Insert, 10 µm, 10/pkg

Part Number: WAT015209

The Sugar-Pak I Guard-Pak Insert is used to extend and prolong the lifetime for the Sugar Pak I Column by removing chemical and particulate contaminants from the mobile phase stream.

WAT015209 - Sugar-Pak I Guard-Pak Insert, 10 µm, 10/pkg
Part Number: WAT015209
Brand: Sugar-Pak I

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Format Guard-Pak Insert
Particle Size (dp) 10 µm
USP Classification L19
Units in Package 10/pkg

info

186000132 - Oasis HLB Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk

Part Number: 186000132

Oasis HLB Plus Short cartridges contain the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent for extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These versatile Plus-short cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.

186000132 - Oasis HLB Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk
Part Number: 186000132
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry HLB
Format/Type Plus Short Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 225 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

WAT037525 - End Connector Kit

Part Number: WAT037525
WAT037525 - End Connector Kit
Part Number: WAT037525
Products > Chromatography Consumables & Columns > Accessories > Fittings

info

186000252 - Oasis MCX 1 cc Vac Cartridge, 30 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk

Part Number: 186000252

The 1 cc Oasis MCX cartridges contain the Oasis MCX, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. Since the Oasis MCX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186000252 - Oasis MCX 1 cc Vac Cartridge, 30 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk
Part Number: 186000252
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry MCX
Format/Type Vac Cartridge
Ion Exch. Capacity 1 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 30 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

186000115 - Oasis HLB 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk

Part Number: 186000115

The 6 cc Oasis HLB cartridges contain the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent that was developed for the extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186000115 - Oasis HLB 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk
Part Number: 186000115
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry HLB
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

WAT054225 - Symmetry C18 Sentry Guard Cartridge, 100Å, 5 µm, 3.9 mm X 20 mm, 2/pkg

Part Number: WAT054225

Symmetry C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results.

WAT054225 - Symmetry C18 Sentry Guard Cartridge, 100Å, 5 µm, 3.9 mm X 20 mm, 2/pkg
Part Number: WAT054225
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 19.1
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Sentry Guard Cartridge
ID 3.9 mm
Length (mm) 20 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L1
Units in Package 2/pkg
pH Range 2 - 8

info

WAT042881 - UV Detector Linearity Standards Kit

Part Number: WAT042881

Kit contains standards appropriate for assessment of UV. 7 Ampules (10 ml standard solutions contains): Ampule 1 100% Methanol Ampule 2 5.0 mg/L Propyl Paraben (+/-1%) Ampule 3 10.0 mg/L Propyl Paraben (+/-1%) Ampule 4 15.0 mg/L Propyl Paraben (+/-1%) Ampule 5 20.0 mg/L Propyl Paraben (+/-1%) Ampule 6 25.0 mg/L Propyl Paraben (+/-1%) Ampule 7 30.0 mg/L Propyl Paraben (+/-1%) Propyl Paraben Purity (? 99%). All standards are in 100% HPLC Grade Methanol. Certificate of Analysis

WAT042881 - UV Detector Linearity Standards Kit
Part Number: WAT042881
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector UV
Product Type Standard
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

WAT051910 - Sep-Pak C18 Classic Cartridge, 360 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT051910

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT051910 - Sep-Pak C18 Classic Cartridge, 360 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT051910
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry C18
Endcap End Capped
Format/Type Classic Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info WAT097958 - 2.1x10mm Holder Kit for Cartridges and Guard Columns
Part Number: WAT097958
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

info

WAT054975 - Sep-Pak Cyanopropyl (CN) 1 cc Vac Cartridge, 50 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk

Part Number: WAT054975

Silica-based polar bonded phase; can be used as less polar alternative to silica in normal-phase applications or as less hydrophobic alternative to C18 or C8 in reversed-phase applications; typical applications include drug metabolites and pesticides.

WAT054975 - Sep-Pak Cyanopropyl (CN) 1 cc Vac Cartridge, 50 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk
Part Number: WAT054975
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Cyanopropyl (CN)
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 50 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186002684 - SunFire C18 Sentry Guard Cartridge, 100Å, 5 µm, 4.6 mm X 20 mm, 2/pkg

Part Number: 186002684

SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

186002684 - SunFire C18 Sentry Guard Cartridge, 100Å, 5 µm, 4.6 mm X 20 mm, 2/pkg
Part Number: 186002684
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 16
Chemistry C18
Endcapped Yes
Format Sentry Guard Cartridge
ID 4.6 mm
Length (mm) 20 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 340
System HPLC
USP Classification L1
Units in Package 2/pkg
pH Range 2 - 8

info

WAT200512 - Acrodisc, Syringe Filter, PVDF, 13 mm, 0.45 µm, Protein, 100/pkg

Part Number: WAT200512

This PVDF membrane works well with both aqueous and organic solvents

WAT200512 - Acrodisc, Syringe Filter, PVDF, 13 mm, 0.45 µm, Protein, 100/pkg
Part Number: WAT200512
Brand: Acrodisc

Products > Chromatography Consumables & Columns > Laboratory Filters
Diameter 13 mm
Format Syringe Filter
Hold-up Volume < 30 µL
Housing Polypropylene
Pore Size 0.45 µm
Sample Volume < 10 mL
Separation Mode Protein
Solvent/Sample Compatible PVDF
Units in Package 100/pkg

info

186001861 - RapiGest SF, 1 mg , 5/pk

Part Number: 186001861

RapiGest™ SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. RapiGest™ SF is available in a variety of formats. This part contains five, 1mg vials that contain enough material for 1-50 digestions. Add RapiGest™ SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. US Patent No: 8,580,533

186001861 - RapiGest SF, 1 mg , 5/pk
Part Number: 186001861
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Pharmaceutical and Life Science Standards & Kits > Peptide Standards & Kits > RapiGest SF Surfactant
Applications Life Science
Detector Mass Spec
Product Type Standard
Shipping Formulation Solid
Storage Room temp
System LC/MS

info

186003064 - XBridge BEH C18 Sentry Guard Cartridge, 130Å, 5 µm, 4.6 mm X 20 mm, 2/pkg

Part Number: 186003064

As a workhorse for HPLC method development, XBridge BEH C18 sorbent can be used over an entire range of mobile phase pH (1-12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed.

186003064 - XBridge BEH C18 Sentry Guard Cartridge, 130Å, 5 µm, 4.6 mm X 20 mm, 2/pkg
Part Number: 186003064
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 18
Chemistry C18
Endcapped Yes
Format Sentry Guard Cartridge
ID 4.6 mm
Length (mm) 20 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Low
Surface Area 185
System HPLC
Technology BEH
USP Classification L1
Units in Package 2/pkg
pH Range 1 - 12

info

WAT020515 - Sep-Pak C18 Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT020515

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT020515 - Sep-Pak C18 Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT020515
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry C18
Endcap End Capped
Format/Type Plus Short Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186002493 - Oasis WAX 6 cc Vac Cartridge, 150 mg Sorbent per Cartridge, 30 µm Particle Size, 30/pk

Part Number: 186002493

The 6 cc Oasis WAX cartridges contain the Oasis WAX sorbent, which is a polymeric reversed-phase, weak anion exchange mixed-mode sorbent that has been optimized for fast, simple, and highly selective sample preparation of strong acidic compounds. Since the Oasis WAX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading.

186002493 - Oasis WAX 6 cc Vac Cartridge, 150 mg Sorbent per Cartridge, 30 µm Particle Size, 30/pk
Part Number: 186002493
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry WAX
Format/Type Vac Cartridge
Ion Exch. Capacity 0.6 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 150 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

WAT058957 - 96-well Sample collection plate 1mL 50/pkg

Part Number: WAT058957

Waters offers a selection of 96-and 384-well sample/collection plates along with cap mats and heat seals.

WAT058957 - 96-well Sample collection plate 1mL 50/pkg
Part Number: WAT058957
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2795
Certified Not Certified
Format 96 Well Plates
Units in Package 50/pkg
Volume Capacity 1 mL

info

WAT020550 - Sep-Pak Accell Plus CM Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT020550

Sep-Pak Accell Plus CM Plus Short cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These cartridges are provided in the short-body configurations for easily attachment to pumps and syringes. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.

WAT020550 - Sep-Pak Accell Plus CM Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT020550
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus CM
Format/Type Plus Short Cartridge
Ion Exch. Capacity 370 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT084189 - PIC A Low UV Reagent

Part Number: WAT084189

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC A Low UV is 5 vials/pkg of tertrabutylammonium hydrogen sulfate in a workable UV range in mobile phase 200+ nm.

WAT084189 - PIC A Low UV Reagent
Part Number: WAT084189
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

186000116 - Oasis HLB 12 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 20/pk

Part Number: 186000116

The 12 cc Oasis HLB cartridges contain the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent that was developed for the extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186000116 - Oasis HLB 12 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 20/pk
Part Number: 186000116
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 12 cc
Chemistry HLB
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 500 mg
Units In Package 20/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

600000671CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 1 mL Volume, 100/pkg

Part Number: 600000671CV

All Waters LCMS Certified vials are produced following tightly controlled manufacturing processes and handling procedures. They are tested with mass spectrometers and come packaged with a certificate of analysis showing the reference and vial scan for the manufacturing lot.

600000671CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Total Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 1 mL Volume, 100/pkg
Part Number: 600000671CV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2695
Certified LCMS Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Total Recovery Vial
GlassType Clear Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 1 mL

info

WAT020510 - Sep-Pak Alumina N Plus Long Cartridge, 1710 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk

Part Number: WAT020510

Sep-Pak Alumina N Plus Long cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. These versatile Plus Long cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.

WAT020510 - Sep-Pak Alumina N Plus Long Cartridge, 1710 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk
Part Number: WAT020510
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Alumina N
Format/Type Plus Long Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 1710 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

600000670CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 600000670CV

All Waters LCMS Certified vials are produced following tightly controlled manufacturing processes and handling procedures. They are tested with mass spectrometers and come packaged with a certificate of analysis showing the reference and vial scan for the manufacturing lot.

600000670CV - LCMS Certified Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 600000670CV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
LDC
Perkin-Elmer
Spectra-Physics
Varian
Waters 2695
Waters 2795
Waters Acquity
Certified LCMS Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Max Recovery Vial
GlassType Clear Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL

info

WAT020525 - Sep-Pak Florisil Plus Long Cartridge, 910 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk

Part Number: WAT020525

Polar, highly active, weakly basic sorbent for adsorption of low to moderate polarity species from nonaqueous solutions.

WAT020525 - Sep-Pak Florisil Plus Long Cartridge, 910 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk
Part Number: WAT020525
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Florisil
Format/Type Plus Long Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 910 mg
Units In Package 50/pkg
Water Wettable Water Wettable

info

WAT036810 - Sep-Pak tC18 Plus Short Cartridge, 400 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT036810

Silica-based bonded phase with strong hydrophobicity; trifunctional bonding chemistry gives it an increased hydrolytic stabilty; applications similar to C18.

WAT036810 - Sep-Pak tC18 Plus Short Cartridge, 400 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT036810
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry TC18
Endcap End Capped
Format/Type Plus Short Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 400 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT084282 - PIC B7 Low UV Reagent

Part Number: WAT084282

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC B7 Low UV is a 5 vial/pkg of heptane sulfonic acid in a workable UV range in mobile phase 200+ nm.

WAT084282 - PIC B7 Low UV Reagent
Part Number: WAT084282
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Standard
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

186000256 - Oasis MCX 6 cc Vac Cartridge, 150 mg Sorbent per Cartridge, 30 µm Particle Size, 30/pk

Part Number: 186000256

The 6 cc Oasis MCX cartridges contain the Oasis MCX, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. Since the Oasis MCX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading.

186000256 - Oasis MCX 6 cc Vac Cartridge, 150 mg Sorbent per Cartridge, 30 µm Particle Size, 30/pk
Part Number: 186000256
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry MCX
Format/Type Vac Cartridge
Ion Exch. Capacity 1 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 150 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

186000327DV - Deactivated Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 1.5 mL Volume, 100/pkg

Part Number: 186000327DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

186000327DV - Deactivated Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, with Cap and Preslit PTFE/Silicone Septa, 1.5 mL Volume, 100/pkg
Part Number: 186000327DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
LDC
Perkin-Elmer
Spectra-Physics
Varian
Waters 2795
Waters Acquity
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Max Recovery Vial
GlassType Deactivated Clear Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 1.5 mL