Product Listing:  201000272 - UPC² Convergence Manager Peformance Maintence Kit   to   WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Sorted by Popularity
  Product    
info

201000272 - UPC² Convergence Manager Peformance Maintence Kit

Part Number: 201000272

The Waters® Performance Maintenance Kit for the UPC² Convergence Manager, contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: air chassis filter, inject valve pod, filters and valve cartridge.

201000272 - UPC² Convergence Manager Peformance Maintence Kit
Part Number: 201000272
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY UPC2 Convergence Mgr
Replacement Schedule Annually

info

201000301 - ACQUITY QDA (KAB) P PERFORM MAINT KIT

Part Number: 201000301

The Waters® Performance Maintenance Kit for the QDa (Performance) contains most of the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source components and vacuum pump components. It is also recommended that the ESI probe is also replaced at the same time, these are specific to your system configuration and should be ordered separately. This Waters® Performance Maintenance Kit is required for serial numbers KAB1052 or higher, if your serial number is an earlier unit you will also need to order 700010377 Ion Block Assy MKII if it hasn't already been fitted.

201000301 - ACQUITY QDA (KAB) P PERFORM MAINT KIT
Part Number: 201000301
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Replacement Schedule Annually

info

700005534 - Tube Assembly, Preheater to Column Assembly, Reusable, SS

Part Number: 700005534

Preheater to Column Tube Assembly, Reusable, SS

700005534 - Tube Assembly, Preheater to Column Assembly, Reusable, SS
Part Number: 700005534
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
ACQUITY I-Class BSM
ACQUITY UPC2 BSM
ACQUITY UPLC PDA Detector
Column Heater
Replacement Schedule As Needed

info

700005682 - Seat Port Assembly, .004 ID, Bio

Part Number: 700005682

ACQUITY H-Class Bio Seat Port Assembly, .004 ID

700005682 - Seat Port Assembly, .004 ID, Bio
Part Number: 700005682
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY H-Class Bio Sample Manager-Flow Through Needle
Replacement Schedule As Needed

info

700006069 - Injection Valve Cartridge, Full Loop (18 KPSI)

Part Number: 700006069

ACQUITY I-Class FL Injection Valve Cartridge, 18 KPSI

700006069 - Injection Valve Cartridge, Full Loop (18 KPSI)
Part Number: 700006069
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category ACQUITY
Products ACQUITY I-Class SM-FL
Replacement Schedule As Needed

info

700009576 - Syringe, 250 µL, HPLC PPS Tip

Part Number: 700009576

ACQUITY APC pFTN Syringe, 250 µL, HPLC PPS Tip

700009576 - Syringe, 250 µL, HPLC PPS Tip
Part Number: 700009576
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category ACQUITY
Products ACQUITY APC SM-pFTN
Replacement Schedule As Needed

info

700009964 - Tube, Cap, 75µm x 14 in, V-V, HP

Part Number: 700009964

This spare part is a Waters Quality part.

700009964 - Tube, Cap, 75µm x 14 in, V-V, HP
Part Number: 700009964
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category nanoACQUITY
Replacement Schedule As Needed

info

WAT011576 - Polyethylene Oxide Standard 40,000

Part Number: WAT011576

An individual GPC standard (Gel Permeation Chromatography standards) for molecular weight determination. Polyethylene Oxide Standard at 40,000 Da

WAT011576 - Polyethylene Oxide Standard 40,000
Part Number: WAT011576
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Chemical and Environmental Analysis Standards > GPC & GFC Standards
Applications Life Science
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System HPLC -UV

info

186006363 - Reversed-Phase QC Reference Material

Part Number: 186006363

The Quality Control Reference Materials portfolio is a unique collection of standards and mixtures. These products allow the user to evaluate and benchmark their chromatography system before analysis of critical material. The products in the portfolio are all specially formulated based on the expertise of Waters scientist. The Reversed-Phase QC Reference Material is a significantly complex reference material mixture in that it contains compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. It can be used with a variety of column chemistries and dimensions, and system hardware. The Reversed-Phase QC Reference Material contains 7 compounds including uracil, butyl paraben, naphthalene, propranolol, dipropylphthalate, acenaphthene, and amitriptyline at pH 7. This standard mix should be used to confirm the benchmark performance of your analytical HPLC or UPLC system. This particular QC Reference Material is a specially formulated mix that includes a void marker, neutral, acidic and basic compounds. These compounds were vigorously tested and evaluated and chosen because they provide the following advantages: – Excellent benchmark – Good peak shape on UV – Acceptable for use on a variety of column

186006363 - Reversed-Phase QC Reference Material
Part Number: 186006363
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Column Chemistry C18 RP
Detector UV
Packaging 1/pkg
Product Type Standard
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

700001008 - Tubing, 0.062in. x 0.0025in. x 6ft, PEEK

Part Number: 700001008

This spare part is a Waters Quality part.

700001008 - Tubing, 0.062in. x 0.0025in. x 6ft, PEEK
Part Number: 700001008
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Capillary LC
Products CapLC System
CapLC XE System
Replacement Schedule As Needed

info

WAT062479 - Bottle Caps, 1L, 4/Pkg

Part Number: WAT062479

The one liter Solvent Bottle Cap is a polyethylene cap that prevents free exchange of atmospheric gasses with helium, but will not sustain an internal pressure build-up.The three-holed cap can accomodate a helium inlet line, helium exhaust line, and a solvent inlet line.

WAT062479 - Bottle Caps, 1L, 4/Pkg
Part Number: WAT062479
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Pumps
Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
626 LC System

info

186000349DV - 96 well plate with deactivated 700uL glass inserts, 1pkg

Part Number: 186000349DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

186000349DV - 96 well plate with deactivated 700uL glass inserts, 1pkg
Part Number: 186000349DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2795
Certified Not Certified
Format 96 Well Plates
GlassType Deactivated
Units in Package 1/pkg
Volume Capacity 700 µL

info

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022995

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022995
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.005 in. (0.127 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE

Part Number: WAT026808

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE
Part Number: WAT026808
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 25 ft (7.6 m)
Material of Construction PTFE
Outside Diameter 0.125 in. (3.17 mm)

info

430001084 - Tube Assy. Inject Outlet, UPLC

Part Number: 430001084

ACQUITY SM Injector Outlet Tube Assembly, .005 ID x 11 inches long

430001084 - Tube Assy. Inject Outlet, UPLC
Part Number: 430001084
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

430001200 - Tube, Accum A Transducer to Vent Valve

Part Number: 430001200

This spare part is a Waters Quality part.

430001200 - Tube, Accum A Transducer to Vent Valve
Part Number: 430001200
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
nanoACQUITY
Products ACQUITY I-Class BSM
ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

186000847DV - Deactivated Amber Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg

Part Number: 186000847DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

186000847DV - Deactivated Amber Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Volume, 100/pkg
Part Number: 186000847DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
LDC
Perkin-Elmer
Spectra-Physics
Varian
Waters 2695
Waters 2795
Waters Acquity
Certified Not Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Deactivated Amber Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 2 mL

info

WAT026810 - Tubing, 1/4 in. (6.4mm) O.D. X 0.19 in. (4.83 mm) I.D. X 10 ft (3.0 m) Length , PTFE

Part Number: WAT026810

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026810 - Tubing, 1/4 in. (6.4mm) O.D. X 0.19 in. (4.83 mm) I.D. X 10 ft (3.0 m) Length , PTFE
Part Number: WAT026810
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.19 in. (4.83 mm)
Length 10 ft (3.0 m)
Material of Construction PTFE
Outside Diameter 1/4 in. - (6.4 mm)

info

186006518 - BEH200 SEC Protein Standard Mix

Part Number: 186006518

The BEH200 SEC Protein Standard Mix is a 5 component protein mixture (Thyroglobulin, IgG, BSA, Myoglobin, Uracil) used to benchmark ACQUITY UPLC BEH200 SEC, 1.7 µm Columns. It is recommended that this standard be used on a regular basis for benchmarking column and system performance, similar to the QCRM product line.

186006518 - BEH200 SEC Protein Standard Mix
Part Number: 186006518
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Packaging 1/pkg
Product Type Column Performances
Shipping Formulation Solid
Storage Frozen -20 C
System UPLC

info

186006846 - MS Cleaning Solution

Part Number: 186006846

For use in cleaning MS parts, 500mL MS cleaning solution

186006846 - MS Cleaning Solution
Part Number: 186006846
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid
Storage Room temp
System LC/MS

info

WAT025604 - Compression Screws and Ferrules, 5/Pkg

Part Number: WAT025604

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which could damage valves and block columns.

WAT025604 - Compression Screws and Ferrules, 5/Pkg
Part Number: WAT025604
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026973

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026973
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.009 in. (0.23 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT270946DV - Deactivated Clear Glass 12 x 32mm screw neck Vial with 10 mm Cap and PTFE/silicone Septum, 2 mL,100/pkg

Part Number: WAT270946DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

WAT270946DV - Deactivated Clear Glass 12 x 32mm screw neck Vial with 10 mm Cap and PTFE/silicone Septum, 2 mL,100/pkg
Part Number: WAT270946DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Beckman
Gilson
Hitachi
LDC
Perkin-Elmer
Shimadzu
Spark
Spectra-Physics
Varian
Waters 2695
Waters 2795
Certified Not Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Deactivated Clear Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 2 mL

info

WAT025531 - Solvent Reservoir Filter

Part Number: WAT025531

This 10-micron filter protects the system from particulate matter in the solvent bottle. All solvent filters are thoroughly cleaned at Waters® using a nitric acid wash to remove oils and other possible contaminants that can compromise results.

WAT025531 - Solvent Reservoir Filter
Part Number: WAT025531
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Filters
Product Category ACQUITY
Injectors
Pumps
Separations Module
Systems
Products 1515 HPLC Pump
1525 EF HPLC Pump
1525 HPLC Pump
1525 Micro HPLC Pump
2535 Quaternary Gradient Module
2545 Quaternary Gradient Pump
2555 Quaternary Gradient Module
2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2700 Sample Manager
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
ACQUITY UPLC Binary Solvent Manager
Alliance GPC/V 2000 Systems
LC Module 1
Replacement Schedule As Needed

info

M956358AD1 - Capillary Tube

Part Number: M956358AD1

This spare part is a Waters Quality part.

M956358AD1 - Capillary Tube
Part Number: M956358AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products LCT Premier
LCT Premier XE
Q-Tof Premier Mass Spectrometer
SYNAPT™ MS
Synapt High Definition MS System™
Replacement Schedule As Needed

info

700002456 - MS Leucine Enkephalin Kit

Part Number: 700002456

For use with Mass Spectrometers, 1 X 5mL 2ng/uL Leucine Enkephalin Solution in 50/50 Acetonitrile water amber flame sealed ampule 1 5mL 1% Acetic Acid Solution in 50/50 acetonitrile/water amber flame sealed ampule 1 empty 12mL screw thread amber vial with cap includes Certificate of Analysis

700002456 - MS Leucine Enkephalin Kit
Part Number: 700002456
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid
Storage Room temp
System LC/MS

info

700003115 - Collet, Reusable, HPFT, 2/pkg

Part Number: 700003115

ACQUITY Reusable Collet, HPFT, (2PK) used on Column Heaters

700003115 - Collet, Reusable, HPFT, 2/pkg
Part Number: 700003115
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category ACQUITY
Products ACQUITY UPLC High Temperature Column Heater
ACQUITY UPLC Column Heater Module
Replacement Schedule As Needed

info PSL613312 - PEEK Union with 2 PEEK Fingertight Nuts and Double Ferrules 1/16in.
Part Number: PSL613312
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

6070695-S - NW25 to NW10 Reducer

Part Number: 6070695-S

NW25 to NW10 Reducer, Aluminium

6070695-S - NW25 to NW10 Reducer
Part Number: 6070695-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Vacuum connections
Product Category Mass Spectrometry
Products GCT Mass Spectrometer
Replacement Schedule As Needed

info

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026805

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026805
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.040 in. (1.02 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)