Product Listing:  WAT200500 - Acrodisc, Syringe Filter, PTFE, 25 mm, 0.45 µm, Non polar, 50/pkg   to   430002231 - Tube, Anal. Inj. Vlv Port 3 to Col. in.

Sorted by Popularity
  Product    
info

WAT200500 - Acrodisc, Syringe Filter, PTFE, 25 mm, 0.45 µm, Non polar, 50/pkg

Part Number: WAT200500

This PTFE membrane is a good choice for use with aggresive organic solvents

WAT200500 - Acrodisc, Syringe Filter, PTFE, 25 mm, 0.45 µm, Non polar, 50/pkg
Part Number: WAT200500
Brand: Acrodisc

Products > Chromatography Consumables & Columns > Laboratory Filters
Diameter 25 mm
Format Syringe Filter
Hold-up Volume < 100 µL
Housing Polypropylene
Pore Size 0.45 µm
Sample Volume < 100 mL
Separation Mode Non polar
Solvent/Sample Compatible PTFE
Units in Package 50/pkg

info

700002747 - Pin Plug, 1/16in., High Pressure, 5/pkg

Part Number: 700002747

The pin plug is required in port 6 of the Trap Valve pod assembly in the following configurations for the nanoACQUITY: Direct Injection, Single Pump Trapping, Vented Dual Pump Trapping, , and 2D with Dilution. To see the Fluidic Configurations for the nanoACQUITY UPLC, go to the Url Link below, under Systems select nanoACQUITY, click on the Waters Graphical Part Locator, and then choose Fluidic Configurations on the right side of the page. There will be the six different configurations of the nanoACQUITY that you can click on individually to see a larger image. There will also be a parts list for that specific configuration on the right side of the page.

700002747 - Pin Plug, 1/16in., High Pressure, 5/pkg
Part Number: 700002747
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Bio Quaternary Solvent Manager
nanoACQUITY UPLC with 2D Technology
Replacement Schedule As Needed

info

700005164 - Check Valve, Double Ball & Seat

Part Number: 700005164

ACQUITY H-Class QSM Double Ball & Seat Check Valve

700005164 - Check Valve, Double Ball & Seat
Part Number: 700005164
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category ACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
Replacement Schedule As Needed

info

WAT023531 - Sep-Pak Accell Plus CM Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT023531

Sep-Pak Accell Plus CM Plus Light cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023531 - Sep-Pak Accell Plus CM Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT023531
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus CM
Format/Type Plus Light Cartridge
Ion Exch. Capacity 370 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT270939 - Face Seals Replacement Kit 4/Pkg

Part Number: WAT270939

The Face Seal is made from a proprietary material available only from Waters®. It is used on the 2690/2695, 2690D/2695D and 2790/2790 Separations Modules, and the GPC 2000 System

WAT270939 - Face Seals Replacement Kit 4/Pkg
Part Number: WAT270939
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems

info

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg

Part Number: WAT005137

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT005137 - PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Part Number: WAT005137
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

info

WAT270940 - Wash Tube Seal Replacement Kit, 4/Pkg

Part Number: WAT270940

These seals are integral to the solvent management system of your 2690 and 2790 Separations Modules. As part of the seal wash system, they help ensure that plunger seal life is maximized.

WAT270940 - Wash Tube Seal Replacement Kit, 4/Pkg
Part Number: WAT270940
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

700002646 - TQD/Q-Premier/XE/Q-Micro Qualification Standards Test Kit Kit

Part Number: 700002646

Mass Spectrometry standards kit for system assessment. 10 Component Kit 1. Set-up Solution QP PPG 10002.5 ng/uL, Triacetyl-B-cyclodextrin 5.0 ng/ul, Verapamil 100.0 pg/ul, Leucine Enkaphalin 1.0 ng/ul, Ammonium Acetate 0.31 mg/ml in 1:1 Aceto/water 15mL brown Nalgene 2. 1 x 10 ml ESI Resolution: PPG 2000 Solution 1.0 ug/ul Ammonium Acetate 10.2 mg/ml in Acetonitrile/Water (1:1 V/V) 15mL clear Nalgene 3. 3. 1 x 10ml ESI Mass Measurement Accuracy: PEG 1000 Solution 100.0 ng/ul Ammonium Acetate 0.17 mg/ml in Acetonitrile/Water (1:1 V/V) 15mL clear Nalgene 4. 1 x 5mg ESI Sensitivity Reserpine: 5mg solid resperpine in 4mL amber screw Top vial 5. 1 X 10mg ESI Sensitvitiy Raffinose: 10mg solid Raffinose in 4mL Screw Top Vial 6.1 x 10 mg Ion Sabre APCI Sensitivity: 10mg solid 7-alphahydroxyprogesterone in 4 ml Amber Screw Top Vial 7. 1 x 50 mg ESI Sensitivity Chloramphenicol: 50 mg solid Chloramphenicol Solid in 8mL amber screw Top Vial 8. 1 X 10mL API Calibration Solution: Sodium Iodide 2ug/uL, Cesium Iodide 50ng/uL in IPA/Water (1:1V/V) in 15 mL Clear Nalgene Bottle 9. 1 x 5mg ESCi Switch/Sensitivity: 5mg solid Sulfadimethoxine Solid in 4mL amber screw top vial 10. X 15mL API Set Up Solution Reserpine 2ng/uL, PPG 1000 25ug/uL, Triacetyl-B-cyclodextran 50ng/uL in Acetonitrile/4mM Ammonium Acetate (50:50) in 15mL Clear Nalgene Bottle 11. Solution Prep Document 715000966 Certificate of Analysis

700002646 - TQD/Q-Premier/XE/Q-Micro Qualification Standards Test Kit Kit
Part Number: 700002646
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid & Solid
Storage Room temp
System LC/MS

info

205000291 - Column Stabilizer Kit, 50/100mm

Part Number: 205000291

Column Stabilizer Kit, 50-100mm (original column heater)

205000291 - Column Stabilizer Kit, 50/100mm
Part Number: 205000291
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category ACQUITY
Products ACQUITY UPLC Column Heater Module
ACQUITY UPLC Column Heater/Cooler
Replacement Schedule As Needed

info

WAT036805 - Sep-Pak tC18 Plus Light Cartridge, 145 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT036805

Silica-based bonded phase with strong hydrophobicity; trifunctional bonding chemistry gives it an increased hydrolytic stabilty; applications similar to C18.

WAT036805 - Sep-Pak tC18 Plus Light Cartridge, 145 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT036805
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry TC18
Endcap End Capped
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 145 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

700002708 - Sample Needle, PEEK, 15µL

Part Number: 700002708

The 15µLsample needle fits into the 5000psi and 10,000psi nanoACQUITY system.

700002708 - Sample Needle, PEEK, 15µL
Part Number: 700002708
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category nanoACQUITY
Products High Pressure nanoACQUITY UPLC Sample Manager
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

WAT036945 - Sep-Pak C18 3 cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT036945

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT036945 - Sep-Pak C18 3 cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT036945
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry C18
Endcap End Capped
Format/Type Vac RC Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

700002715 - Fitting, 6-40, one piece PEEK, 10/pkg

Part Number: 700002715

The one piece PEEK fitting fits into the 5000psi nanoACQUITY system.

700002715 - Fitting, 6-40, one piece PEEK, 10/pkg
Part Number: 700002715
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category nanoACQUITY
Products nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

WAT085142 - PIC Reagent B8

Part Number: WAT085142

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC B8 is a 5 vials/pkg workable solution in UV range in mobile phase of 240+ nm.

WAT085142 - PIC Reagent B8
Part Number: WAT085142
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

WAT020840 - Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT020840

Sep-Pak Amino Propyl (NH2) Vac cartridges contain a moderately polar, silica-based bonded phase with weakly basic surface. The sorbent can be used as a polar sorbent with different selectivity for acidic/basic analytes or as a weak anion exchanges in aqueous medium below pH 8. Applications include extraction of phenols and phenolic pigments, petroleum fractionation, saccharides and drugs and metabolites. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT020840 - Sep-Pak Aminopropyl (NH2) 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT020840
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry Aminopropyl (NH2)
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info 186004631 - Assembled 12 x 32 mm Total Recovery Vial with PTFE/Silicone Septum 100 pack
Part Number: 186004631
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2690
Waters 2695
Waters Acquity
Certified Not Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Clear Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 1.1 mL

info

700004841 - one-piece Fitting, 10-32, 10/pkg

Part Number: 700004841

The original part number was p/n 410001905 and it was changed to p/n 700004841.

700004841 - one-piece Fitting, 10-32, 10/pkg
Part Number: 700004841
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category ACQUITY
Products ACQUITY UPLC High Temperature Column Heater
ACQUITY UPLC Column Heater/Cooler
ACQUITY UPLC Column Manager
Replacement Schedule As Needed

info

WAT270945 - Carousel Carrier, 5 Carousel Positions

Part Number: WAT270945

The Carousel Carrier has 5 positions for 5 different color-coded carousels in the 2690/2695 and 2690D/2695D Separations Modules.

WAT270945 - Carousel Carrier, 5 Carousel Positions
Part Number: WAT270945
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

186006963 - LCMS QC Reference Standard

Part Number: 186006963

The LCMS QC Reference Material is a 9 component mix of Acetaminophen, Caffeine, Sulfaguanidine, Sulfadimethoxine, Val,-Tyr-Val, Verapamil, Terfenadine, Leucine-Enkephalin and Reserpine packaged in a Waters vial. This standard provides a comprehensive reference for the use with LC/MS or MS instrumentation with a wide variety of conditions and methods.

186006963 - LCMS QC Reference Standard
Part Number: 186006963
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Packaging 1/pkg
Product Type Standard
Shipping Formulation Liquid
Storage Refrigerator 2 to 8 C
System LC/MS

info

405002117 - 2796 Filter Assemby, Inert

Part Number: 405002117

The 2796 contains a new titanium inline filter assembly with a 2µ PEEK filter.

405002117 - 2796 Filter Assemby, Inert
Part Number: 405002117
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2796 Bioseparations Module
Replacement Schedule As Needed

info

WAT088122 - Amino Acid Standard (AccQ-Tag, Pico-Tag, Accu-Tag Ultra)

Part Number: WAT088122

Amino Acid Analysis (AAA) is required for many applications. Amino acids are the constituents of proteins and are the intermediates in many metabolic pathways. Qualitative and quantitative AAA is used to determine the concentration of proteins, to identify proteins and to detect structural variants. Contains 10 1mL ampules of amino acid standards for use with AccQTag Ultra, AccQTag, or PICOTag

WAT088122 - Amino Acid Standard (AccQ-Tag, Pico-Tag, Accu-Tag Ultra)
Part Number: WAT088122
Brand: AccQ-Tag

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Standard
Shipping Formulation Solid
Storage Frozen -20 C
System HPLC -UV

info

186006519 - BEH125 Protein Standard Mix

Part Number: 186006519

The BEH125 SEC Protein Standard Mix is a 4 component protein mixture (Thyroglobulin, Ovalbumin, Ribonuclease A and Uracil) used to benchmark ACQUITY UPLC BEH125 SEC, 1.7 µm Columns. It is recommended that this standard be used on a regular basis for benchmarking column and system performance, similar to the QCRM product line.

186006519 - BEH125 Protein Standard Mix
Part Number: 186006519
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Packaging 1/pkg
Product Type Column Performances
Shipping Formulation Solid
Storage Frozen -20 C
System UPLC

info

700002599 - Head Plunger Seal

Part Number: 700002599

This spare part is a Waters Quality part

700002599 - Head Plunger Seal
Part Number: 700002599
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
ACQUITY UPLC I2V Binary Solvent Manager
ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

430002007 - ASSY, EXTENSION LOOP, 250uL

Part Number: 430002007

This is a 250µL Sample loop used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sample Manager-FTN modules.

430002007 - ASSY, EXTENSION LOOP, 250uL
Part Number: 430002007
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category ACQUITY
Products ACQUITY APC SM-pFTN
ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

700002529 - T7 Tubing Kit

Part Number: 700002529

This spare part is a Waters Quality part

700002529 - T7 Tubing Kit
Part Number: 700002529
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Injectors
Products 2767/2747 Sample Manager
Replacement Schedule As Needed

info

700002644 - Needle Assembly, PEEK

Part Number: 700002644

ACQUITY SM Needle Assembly, PEEK 30ul, standard

700002644 - Needle Assembly, PEEK
Part Number: 700002644
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

WAT010873 - SAM I Reagent

Part Number: WAT010873

Waters SAM Reagent 1 is designed to separate sugars and related compounds using Waters Silica-Pak chromatographic cartridges. This reagent provides fast separations of high loads of sugars and withstands crude sample applications which can soon poison other sugar separations columns. Recirculation of mobile phase allows efficient and economical use of Waters Sam Reagent. Waters Sam Reagent 1 is particularly recommended for the separations of the following mixtures of sugars: -Fructose, Glucose, Sucrose, Maltose, and Lactose. -Lactose and Lactulose -Isomaltose and Maltose -Xylose and Xylulose Enclosed are five-twenty milliliter bottles containing enough reagent to make five liters of mobile phase or 1/2 liter of pre-treatment solution.

WAT010873 - SAM I Reagent
Part Number: WAT010873
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

430002011 - ASSY, EXTENSION LOOP, 100uL

Part Number: 430002011

This is a 100µL Sample loop used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sample Manager-FTN modules.

430002011 - ASSY, EXTENSION LOOP, 100uL
Part Number: 430002011
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category ACQUITY
Products ACQUITY APC SM-pFTN
ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

WAT054615 - Sep-Pak C8 12 cc Vac Cartridge, 2 g Sorbent per Cartridge, 55-105 µm Particle Size, 20/pk

Part Number: WAT054615

Silica-based bonded phase with moderate hydrophobicity; use for methods requiring less retention than C18; typical applications include drugs and their metabolites in serum, plasma or urine, peptides in serum, plasma.

WAT054615 - Sep-Pak C8 12 cc Vac Cartridge, 2 g Sorbent per Cartridge, 55-105 µm Particle Size, 20/pk
Part Number: WAT054615
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 12 cc
Chemistry C8
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 2 g
Units In Package 20/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

430002231 - Tube, Anal. Inj. Vlv Port 3 to Col. in.

Part Number: 430002231

This spare part is part of the Preparative Chromatography Rack for the 25X5 series of pumps.

430002231 - Tube, Anal. Inj. Vlv Port 3 to Col. in.
Part Number: 430002231
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Pumps
Products 2545 Quaternary Gradient Pump
Replacement Schedule As Needed