Product Listing:  WAT271082 - Solvent Bottle Tray   to   WAT085144 - PIC Reagent Sample Kit (PIC A, B5, B6, B7, B8)

Sorted by Popularity
  Product    
info

WAT271082 - Solvent Bottle Tray

Part Number: WAT271082

The Solvent Bottle Tray holds four 1-Liter bottles. The solvents should be placed above the gradient proportioning valve.

WAT271082 - Solvent Bottle Tray
Part Number: WAT271082
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

186004051 - Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: 186004051

Sep-Pak Accell Plus QMA Carbonate Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with a large pore size (300Å) and a carbonate counter-ion. These cartridges are used for extraction of anionic analytes in aqueous and non-aqueous solutions when the chloride counter-ion in the standard Sep-Pak Accell Plus QMA cartridges interferes with the analysis. These Light-style cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

186004051 - Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: 186004051
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus QMA Carbonate
Format/Type Plus Light Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 2 - 8 pH

info

186007272 - XBridge Glycan BEH Amide Sentry Guard Cartridge, 130Å, 3.5 µm, 4.6 mm X 20 mm, 2/pkg

Part Number: 186007272

Waters BEH-based Glycan chemistry offerings are available in three highly scalable particle sizes that address UPLC (i.e, 1.7 µm) and HPLC-based (2.5 µm XP and 3.5 µm) application needs. Each batch of BEH Glycan material is specifically quality control tested with the 2-AB labeled, Waters Glycan Performance standard to help ensure batch to batch consistency as well as highly similar separated glycan profiles. To help ensure highly similar results, chromatographers can now choose the most appropriate LC-based technology to address their specific released glycan analysis application needs and laboratory instrumentation.

186007272 - XBridge Glycan BEH Amide Sentry Guard Cartridge, 130Å, 3.5 µm, 4.6 mm X 20 mm, 2/pkg
Part Number: 186007272
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns > XBridge Columns
% Carbon Load 12
Application Glycan
Chemistry Amide
Endcapped No
Format Sentry Guard Cartridge
ID 4.6 mm
Length (mm) 20 mm
Mode Hydrophilic Interaction (HILIC)
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 130Å
QC Tested Glycan
Silanol Activity Low
Surface Area 185
System HPLC
Technology BEH
Units in Package 2/pkg
pH Range 2 - 11

info

186004540 - Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 46 mg Sorbent per Cartridge, 40 µm Particle Size, 50/pk

Part Number: 186004540

Sep-Pak Accell Plus QMA Carbonate Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with a large pore size (300Å) and a carbonate counter-ion. These cartridges are used for extraction of anionic analytes in aqueous and non-aqueous solutions when the chloride counter-ion in the standard Sep-Pak Accell Plus QMA cartridges interferes with the analysis. These Light-style cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

186004540 - Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 46 mg Sorbent per Cartridge, 40 µm Particle Size, 50/pk
Part Number: 186004540
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus QMA Carbonate
Format/Type Plus Light Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 40 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 46 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 2 - 8 pH

info

WAT027059 - Porapak Q 50-80 mesh, 26 grams

Part Number: WAT027059

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027059 - Porapak Q 50-80 mesh, 26 grams
Part Number: WAT027059
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

WAT027060 - Porapak Q 80-100 mesh, 26 grams

Part Number: WAT027060

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027060 - Porapak Q 80-100 mesh, 26 grams
Part Number: WAT027060
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

WAT010835 - Sep-Pak Accell Plus QMA Classic Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT010835

Sep-Pak Accell Plus QMA Classic cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of larger molecules such as anionic proteins such as immunoglobulins and enzymes. Other applications include isolation of phenolic compounds and removal of acidic pigments in wine, fruit juices, and food extracts. These Classic-style cartridges are designed for use with positive displacement by a Luer-tip syringe and can also attach easily to vacuum-assisted flow devices using a male/male adaptor.

WAT010835 - Sep-Pak Accell Plus QMA Classic Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT010835
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus QMA
Format/Type Classic Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT010910 - Sep-Pak Accell Plus CM Classic Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT010910

Sep-Pak Accell Plus CM Classic cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These Classic-style cartridges are designed for use with positive displacement by a Luer-tip syringe and can also attach easily to vacuum-assisted flow devices using a male/male adaptor.

WAT010910 - Sep-Pak Accell Plus CM Classic Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT010910
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus CM
Format/Type Classic Cartridge
Ion Exch. Capacity 370 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT020545 - Sep-Pak Accell Plus QMA Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT020545

Sep-Pak Accell Plus QMA Plus Short cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of larger molecules such as anionic proteins such as immunoglobulins and enzymes. Other applications include isolation of phenolic compounds and removal of acidic pigments in wine, fruit juices, and food extracts. These versatile cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.

WAT020545 - Sep-Pak Accell Plus QMA Plus Short Cartridge, 360 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT020545
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus QMA
Format/Type Plus Short Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT027048 - Porapak N 80-100 mesh, 29 grams

Part Number: WAT027048

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027048 - Porapak N 80-100 mesh, 29 grams
Part Number: WAT027048
Products > Chromatography Consumables & Columns > Accessories
Category All Gas Packings

info

700004206 - Capillary Tube

Part Number: 700004206

This spare part is a Waters Quality part

700004206 - Capillary Tube
Part Number: 700004206
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Xevo™ TQ MS
Replacement Schedule As Needed

info

WAT027061 - Porapak Q 100-120 mesh, 26 grams

Part Number: WAT027061

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027061 - Porapak Q 100-120 mesh, 26 grams
Part Number: WAT027061
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

WAT043345 - Sep-Pak C18 35 cc Vac Cartridge, 10 g Sorbent per Cartridge, 55-105 µm Particle Size, 10/pk

Part Number: WAT043345

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT043345 - Sep-Pak C18 35 cc Vac Cartridge, 10 g Sorbent per Cartridge, 55-105 µm Particle Size, 10/pk
Part Number: WAT043345
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 35 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 10 g
Units In Package 10/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT051810 - Sep-Pak Alumina N Classic Cartridge, 1850 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk

Part Number: WAT051810

Sep-Pak Alumina N Classic cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. These Classic-style cartridges are designed for use with positive displacement by a Luer-tip syringe and can also attach easily to vacuum-assisted flow devices using a male/male adaptor.

WAT051810 - Sep-Pak Alumina N Classic Cartridge, 1850 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk
Part Number: WAT051810
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Alumina N
Format/Type Classic Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 1850 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186000632 - XTerra MS C18 Sentry Guard Cartridge, 125Å, 3.5 µm, 2.1 mm X 10 mm, 2/pkg

Part Number: 186000632

XTerra MS C18 columns are general purpose, hybrid-based, reversed-phase C18 columns that are designed to be compatible with mass spectrometry applications. These first generation columns provide superior pH stability compared to a silica-based column.

186000632 - XTerra MS C18 Sentry Guard Cartridge, 125Å, 3.5 µm, 2.1 mm X 10 mm, 2/pkg
Part Number: 186000632
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15.5
Bonding Technology MS C18
Chemistry C18
Endcapped Yes
Format Sentry Guard Cartridge
ID 2.1 mm
Length (mm) 10 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 2/pkg
pH Range 1 - 12

info

186004865 - XBridge BEH Amide Sentry Guard Cartridge, 130Å, 3.5 µm, 4.6 mm X 20 mm, 2/pkg

Part Number: 186004865

XBridge BEH Amide columns retain extremely polar compounds, including carbohydrates and sugars. XBridge Amide columns offer you a chemically stable, trifunctionally bonded amide phase that is stable from pH 2 to 12 to enable the separation of polar analytes spanning a wide range of polarity, structural moiety and pKa.

186004865 - XBridge BEH Amide Sentry Guard Cartridge, 130Å, 3.5 µm, 4.6 mm X 20 mm, 2/pkg
Part Number: 186004865
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 12
Chemistry Amide
Endcapped No
Endfitting Type Waters
Format Sentry Guard Cartridge
ID 4.6 mm
Length (mm) 20 mm
Mode Hydrophilic Interaction (HILIC)
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 130Å
Surface Area 185
System HPLC
Technology BEH
Units in Package 2/pkg
pH Range 2 - 11

info

700003055 - Sample Cone 0.5 Diam.

Part Number: 700003055

This spare part is a Waters Quality part

700003055 - Sample Cone 0.5 Diam.
Part Number: 700003055
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products 3100 Mass Detector
Single Quad Detector
Tandem Quadrupole Detector
Replacement Schedule As Needed

info

6436005-S10 - Tube PEEK 1/16in x .005in, 10m Red

Part Number: 6436005-S10

This spare part is a Waters Quality part

6436005-S10 - Tube PEEK 1/16in x .005in, 10m Red
Part Number: 6436005-S10
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products LCT Premier
Q-Tof micro Mass Spectrometer
Quattro Premier Mass Spectrometer
Quattro micro Mass Spectrometer
SYNAPT™ MS
Synapt High Definition MS System™
Replacement Schedule As Needed

info

186006841 - 2-AB Dextran Calibration Ladder

Part Number: 186006841

In order to take full advantage of the BEH glycan column, Waters created the 2-aminobenzamide labeled 2-AB Dextran Calibration Ladder Standard to assist glycan profiling. Glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the 2AB-labeled dextran ladder and assigned with glucose unit (GU) values. Waters 2-AB labeled Dextran Calibration Ladder is different than the existing commercial offerings. The average molecular weight of the glucose homopolymer is higher (~4,500 Dalton), therefore, the workable GU value range is twice as much as the other dextran ladder standards; the observed GU goes from 2 to 30. This feature improves the large glycan retention time assignment.

186006841 - 2-AB Dextran Calibration Ladder
Part Number: 186006841
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Packaging 1/pkg
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System LC/MS

info

405011492 - Needle Seat

Part Number: 405011492

The needle seat is a spare part used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sm-FTN. The original part number was 405008397 and the new replacement part number is 405011492.

405011492 - Needle Seat
Part Number: 405011492
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

PSS830053 - Spherisorb ODS2 Guard Cartridge, 80Å, 5 µm, 4.6 mm X 10 mm, 3/pkg

Part Number: PSS830053

Spherisorb ODS2 columns are general purpose, silica-based, reversed-phase C18 columns. The ODS2 packing features intermediate ligand density with a specified carbon load of 11.5%.

PSS830053 - Spherisorb ODS2 Guard Cartridge, 80Å, 5 µm, 4.6 mm X 10 mm, 3/pkg
Part Number: PSS830053
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 11.5
Bonding Technology ODS2
Chemistry C18
Endcapped Yes
Format Guard Cartridge
ID 4.6 mm
Length (mm) 10 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Silanol Activity High
Surface Area 220
System HPLC
USP Classification L1
Units in Package 3/pkg
pH Range 2 - 8

info

186006348 - 20 Pesticide Mix Standard

Part Number: 186006348

10ug/mL of each: atrazin, atrazin-desethyl, cyanazin, sebuthylazin, simazin, terbuthylazin, hexazinone, chlortoluron, diuron, linuron, metobromuron, metoxuron, monolinuron, metolachlor, Methamidophos, Acephate, Methomyl, Dicrotophos, Buprofenzin, Fenpropimorph in Acetonitrile

186006348 - 20 Pesticide Mix Standard
Part Number: 186006348
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Environment
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid
Storage Refrigerator 2 to 8 C
System LC/MS

info

PSS830077 - Spherisorb Cyano (CN) Guard Cartridge, 80Å, 5 µm, 4.6 mm X 10 mm, 3/pkg

Part Number: PSS830077

Spherisorb ODS1 columns are general purpose, silica-based, reversed-phase C18 columns. The ODS1 packing features low ligand density with a specified carbon load of 6.2%.

PSS830077 - Spherisorb Cyano (CN) Guard Cartridge, 80Å, 5 µm, 4.6 mm X 10 mm, 3/pkg
Part Number: PSS830077
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 3.1
Chemistry Cyano (CN)
Endcapped No
Format Guard Cartridge
ID 4.6 mm
Length (mm) 10 mm
Mode Normal-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L10
Units in Package 3/pkg
pH Range 2 - 8

info

700004344 - Captive Screw, M3 x 10

Part Number: 700004344

Captive Screw, M3 x 10 (Gold Plated)

700004344 - Captive Screw, M3 x 10
Part Number: 700004344
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Nuts/bolts/screws
Product Category Mass Spectrometry
Products SQ Detector 2
SYNAPT G2 HDMS System
SYNAPT G2 MS System
SYNAPT G2-S
SPECVALUE134881948
Xevo G2 Q-Tof Mass Spec
Xevo G2 TOF Mass Spec
Xevo G2-S
Xevo G2-S QTof
Xevo G2-S Tof
Xevo Q-Tof Mass Spec
Xevo TQ-S MS
Xevo TQD
Xevo™ TQ MS
Replacement Schedule As Needed

info

WAT020535 - Sep-Pak Aminopropyl (NH2) Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT020535

Sep-Pak Amino Propyl (NH2) Plus Short cartridges contain a moderately polar, silica-based bonded phase with weakly basic surface. The sorbent can be used as a polar sorbent with different selectivity for acidic/basic analytes or as a weak anion exchanges in aqueous medium below pH 8. Applications include extraction of phenols and phenolic pigments, petroleum fractionation, saccharides and drugs and metabolites. These versatile cartridges can attach easily to pumps and syringes for reliable, positive-pressure flow to speed up the sample processing time. They can also be fitted with removable reservoirs and used on vacuum-assisted flow devices and certain automated systems.

WAT020535 - Sep-Pak Aminopropyl (NH2) Plus Short Cartridge, 360 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT020535
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Aminopropyl (NH2)
Endcap End Capped
Format/Type Plus Short Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 360 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT084199 - PIC B6 Low UV Reagent

Part Number: WAT084199

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC B6 Low UV is a 5 vial/pkg of hexane sulfonic acid in a workable UV range in mobile phase 200+ nm.

WAT084199 - PIC B6 Low UV Reagent
Part Number: WAT084199
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

WAT084283 - PIC B8 Low UV Reagent

Part Number: WAT084283

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC B8 low UV is a 5 vial/pkg of octane sulfonic acid in a workable UV range in mobile phase 200+ nm.

WAT084283 - PIC B8 Low UV Reagent
Part Number: WAT084283
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

WAT084198 - PIC B5 Low UV Reagent

Part Number: WAT084198

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC B5 Low UV is a 5 vial/pkg of pentane sulfonic acid in a workable UV range in mobile phase 200+ nm.

WAT084198 - PIC B5 Low UV Reagent
Part Number: WAT084198
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

700002310 - Conductivity Detector OQ/PQ Mobile Phase

Part Number: 700002310

This is the Mobile Phase used when running the Conductivity OQ/PQ procedure.

700002310 - Conductivity Detector OQ/PQ Mobile Phase
Part Number: 700002310
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Qualification/Calibration Kits
Product Category Detectors
Products 432 Conductivity Detector
Replacement Schedule As Needed

info

WAT085144 - PIC Reagent Sample Kit (PIC A, B5, B6, B7, B8)

Part Number: WAT085144

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC Sample Kit is one vial each of : WAT085101 PIC A, WAT085110 B5, WAT085140 B6, WAT085103 B7, and WAT085142 B8.

WAT085144 - PIC Reagent Sample Kit (PIC A, B5, B6, B7, B8)
Part Number: WAT085144
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV