Product Listing:  WAT036925 - Sep-Pak C18 20 cc Vac Cartridge, 5 g Sorbent per Cartridge, 55-105 µm Particle Size, 20/pk   to   WAT027060 - Porapak Q 80-100 mesh, 26 grams

Sorted by Popularity
  Product    
info

WAT036925 - Sep-Pak C18 20 cc Vac Cartridge, 5 g Sorbent per Cartridge, 55-105 µm Particle Size, 20/pk

Part Number: WAT036925

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT036925 - Sep-Pak C18 20 cc Vac Cartridge, 5 g Sorbent per Cartridge, 55-105 µm Particle Size, 20/pk
Part Number: WAT036925
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 20 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 5 g
Units In Package 20/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT025656 - Sapphire Plunger

Part Number: WAT025656

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances minimize the wear of the plunger seal. Careful concentric alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts. Included with the plunger is a pre-mounted C-Clip, which eliminates the need to remount this component.

WAT025656 - Sapphire Plunger
Part Number: WAT025656
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category Pumps
Systems
Products 510 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1

info

WAS073703 - Sample Loop, 5mL, SS

Part Number: WAS073703

This spare part is part of the Preparative Chromatography Rack for the 25X5 series of pumps.

WAS073703 - Sample Loop, 5mL, SS
Part Number: WAS073703
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category Injectors
Pumps
Products 2545 Quaternary Gradient Pump
FlexInject Manual Dual Injector Module
PrepLC 4000
Replacement Schedule As Needed

info

700002275 - Performance PLUS Check Valve, 2/pkg

Part Number: 700002275

The PerformancePLUS™ Check Valve Cartridges are used with pumps that have the PerformancePLUS Cartridge Check Valve System installed. The PerformancePLUS Cartridge Check Valve System can be used as either an inlet or outlet valve. The check valve materials have been carefully specified for solvent compatibility with all HPLC mobile phases. The housing features a two-piece design that allows it to be removed so that the cartridge can be changed without disturbing the fitting on the housing.

700002275 - Performance PLUS Check Valve, 2/pkg
Part Number: 700002275
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 1525 Micro HPLC Pump
Replacement Schedule As Needed

info

700004729 - [Glu1]-Fibrinopeptide B Standard

Part Number: 700004729

Mass Spectrometry standard for system assessment. 1 x 0.1mg [Glu1]-Fibrinopeptide B 0.1 mg ±0.01 mg Solid 4 mL Amber Screw top Vial Certificate of Analysis

700004729 - [Glu1]-Fibrinopeptide B Standard
Part Number: 700004729
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System LC/MS

info

WAS207069 - Assembly, Plunger

Part Number: WAS207069

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances minimize the wear of the plunger seal, while alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts while safeguarding pump flow rates and system retention times.

WAS207069 - Assembly, Plunger
Part Number: WAS207069
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
Replacement Schedule Annually

info

700002570 - SYRINGE, 100 ul, HP

Part Number: 700002570

This spare part is a Waters Quality part

700002570 - SYRINGE, 100 ul, HP
Part Number: 700002570
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
ACQUITY M-Class µSM-FL
ACQUITY UPLC Sample Manager
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

700002742 - High Pressure Filter Assembly

Part Number: 700002742

Located behind the front panel, the high pressure filter assembly (pulse dampner) reduces the pressure pulsations in the HPLC pump. The original part number was WAS207072 and it has changed to p/n 700002742.

700002742 - High Pressure Filter Assembly
Part Number: 700002742
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Pumps
Products 1515 HPLC Pump
1525 EF HPLC Pump
1525 HPLC Pump
1525 Micro HPLC Pump
515 HPLC Pump

info

700001550 - Inline Filter Assembly

Part Number: 700001550

The In-Line Filter prevents particles from entering the system.

700001550 - Inline Filter Assembly
Part Number: 700001550
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Product Category Pumps
Products 2525 Binary Gradient Module
2545 Binary Gradient Module
Replacement Schedule As Needed

info

186006336 - Adhesive Seal for 96 and 384 well plates, 100/pkg

Part Number: 186006336

Adhesive Seal is a polyolefin film with a synthetic rubber adhesive. This seal is ideal for protein and peptide customers with samples in buffers. The adhesive is resistant small percentages acetonitrile and alcohol in buffers. The film can be used between -80 to 80 °C, and requires no heat sealing equipment to apply.

186006336 - Adhesive Seal for 96 and 384 well plates, 100/pkg
Part Number: 186006336
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Format Cap Mat
Units in Package 100/pkg

info

700002208 - Needle Seal, Gauge 22, 10/pkg

Part Number: 700002208

The Needle Seal is a short length of Teflon tubing which forms the seal around the syringe needle. A stainless steel ferrule is tightened around the Teflon sleeve to ensure a leak-proof fit.The valve needle seal must be replaced every 1500 to 2000 penetrations.

700002208 - Needle Seal, Gauge 22, 10/pkg
Part Number: 700002208
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Injectors
Products 2777 Compact Sample Manager
2777 Sample Manager
Replacement Schedule As Needed

info

700004206 - Capillary Tube

Part Number: 700004206

This spare part is a Waters Quality part

700004206 - Capillary Tube
Part Number: 700004206
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Xevo™ TQ MS
Replacement Schedule As Needed

info

205000365 - Column Stabilizer Kit, 150mm Column

Part Number: 205000365

Column Stablizer Kit, 150mm (original column heater)

205000365 - Column Stabilizer Kit, 150mm Column
Part Number: 205000365
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category ACQUITY
Products ACQUITY UPLC Column Heater Module
ACQUITY UPLC Column Heater/Cooler
Replacement Schedule As Needed

info

186004540 - Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 46 mg Sorbent per Cartridge, 40 µm Particle Size, 50/pk

Part Number: 186004540

Sep-Pak Accell Plus QMA Carbonate Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with a large pore size (300Å) and a carbonate counter-ion. These cartridges are used for extraction of anionic analytes in aqueous and non-aqueous solutions when the chloride counter-ion in the standard Sep-Pak Accell Plus QMA cartridges interferes with the analysis. These Light-style cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

186004540 - Sep-Pak Accell Plus QMA Carbonate Plus Light Cartridge, 46 mg Sorbent per Cartridge, 40 µm Particle Size, 50/pk
Part Number: 186004540
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus QMA Carbonate
Format/Type Plus Light Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 40 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 46 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 2 - 8 pH

info

WAT022946 - Clear-100™ Plunger Seals, 4/Pkg

Part Number: WAT022946

Made from a proprietary material, the Clear-100™ Plunger Seals feature an internal spring that provides the correct pressure on the plunger, increasing the life of the sapphire and the seal itself. The Clear-100™ Seal features an exclusive ringed or ribbed design on the inside of the seal, which helps to maintain a snug fit and increases the seal’s durability. The Clear-100™ Seal is best suited to most applications for Waters® Solvent Delivery Systems. It is included in Performance Maintenance Kits.

WAT022946 - Clear-100™ Plunger Seals, 4/Pkg
Part Number: WAT022946
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Systems
Products 1515 HPLC Pump
1525 HPLC Pump
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1
Replacement Schedule Annually

info

700005183 - Micro Filter 2µm

Part Number: 700005183

Micro Filter 2?m

700005183 - Micro Filter 2µm
Part Number: 700005183
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Filters
Product Category Mass Spectrometry
Products SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

WAT010551 - IC-Pak Anion-exchange Guard-Pak Insert, 10 µm, 5/pkg

Part Number: WAT010551

Waters offers an array of products for ion chromatography . IC-Pak resin based columns allow you to analyze a full range of ions from numerous sample matrices, both simple and complex. They offer an exceptional linear loading range of less than 1.0 ppb to greater than 400 ppm without dilution and without pH limitation on eluent or sample. The flexibility exists for accurate and reproducible anion and cation analyses at all concentration levels.

WAT010551 - IC-Pak Anion-exchange Guard-Pak Insert, 10 µm, 5/pkg
Part Number: WAT010551
Brand: IC-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Anion-exchange
Format Guard-Pak Insert
Particle Size (dp) 10 µm
Units in Package 5/pkg

info

WAT045424 - High Pressure Motorized Valve Rebuild Kit

Part Number: WAT045424

The high pressure valve rebuild kit contains all of the Waters Quality Parts® required to fully rebuild the valves of the Waters® 717/717 Plus Autosampler, 2690/2695 Separations Modules, 2690D/2695D Separations Modules and LC Module 1 system. The spool is crafted to precise hardness, smoothness, and alignment specifications. The high-pressure valve seals are made of proprietary materials and then packed in anti-static bags to further minimize the chance of particulate contamination. The rebuild kit contains a PTFE O-ring, seal, spool, high pressure seals, and comprehensive instructions.

WAT045424 - High Pressure Motorized Valve Rebuild Kit
Part Number: WAT045424
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Injectors
Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
717/717 Plus Autosampler
LC Module 1
Replacement Schedule As Needed

info

WAT060495 - Inlet Check Valve Rebuild Kit

Part Number: WAT060495

Assemble and replace valves yourself at significant cost savings over pre-assembled check valves with this easy-to-use kit. Valve rebuild kits contain all the necessary parts and instructions for replacing worn valves. The ball and seat inlet check valve rebuild kit contains a ball and seat cartridge, gaskets, and comprehensive instructions.

WAT060495 - Inlet Check Valve Rebuild Kit
Part Number: WAT060495
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Systems
Products 510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
LC Module 1
Replacement Schedule As Needed

info

WAT271082 - Solvent Bottle Tray

Part Number: WAT271082

The Solvent Bottle Tray holds four 1-Liter bottles. The solvents should be placed above the gradient proportioning valve.

WAT271082 - Solvent Bottle Tray
Part Number: WAT271082
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

700002600 - PLUNGER, .0787 DIA X 1.415, PKG 2

Part Number: 700002600

This spare part is a Waters Quality part

700002600 - PLUNGER, .0787 DIA X 1.415, PKG 2
Part Number: 700002600
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Bio Quaternary Solvent Manager
ACQUITY H-Class Quaternary Solvent Manager
ACQUITY I-Class BSM
ACQUITY M-Class µASM
ACQUITY M-Class µBSM
ACQUITY UPLC I2V Binary Solvent Manager
ACQUITY UPLC Binary Solvent Manager
ACQUTY Isocratic Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

205000642 - Certified Container Cap Kit

Part Number: 205000642

Certified Container Cap Kit included in the Certified Container Kit and sold separately. Caps are provided in set of seven different colors to help visually identify your solvent. Cap Kit contains 7 solid caps and 7 open caps with Liners and plugs.

205000642 - Certified Container Cap Kit
Part Number: 205000642
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Certified Certified
Format Container Cap Kit

info

700004082 - Vial Holder Tray, 12 pos. 10ml

Part Number: 700004082

Vial Holder Tray, 12 position. 10ml for a 2707 Autosampler.

700004082 - Vial Holder Tray, 12 pos. 10ml
Part Number: 700004082
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Injectors
Products 2707 Autosampler
Replacement Schedule As Needed

info

WAT027059 - Porapak Q 50-80 mesh, 26 grams

Part Number: WAT027059

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027059 - Porapak Q 50-80 mesh, 26 grams
Part Number: WAT027059
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

WAT200675 - Symmetry Shield RP 8 Sentry Guard Cartridge, 100Å, 5 µm, 3.9 mm X 20 mm, 2/pkg

Part Number: WAT200675

These reversed-phase columns contain Waters patented embedded polar group technology that “shields” the silica’ residual silanol surface from highly basic analytes. The reduced silanol activity for the SymmetryShield RP8 column significantly improves peak shape and resolution.

WAT200675 - Symmetry Shield RP 8 Sentry Guard Cartridge, 100Å, 5 µm, 3.9 mm X 20 mm, 2/pkg
Part Number: WAT200675
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15
Chemistry C8
Endcapped Yes
Format Sentry Guard Cartridge
ID 3.9 mm
Length (mm) 20 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L7
Units in Package 2/pkg
pH Range 2 - 8

info

186004032 - MassPREP Micro Desalting Column

Part Number: 186004032

"The MassPREP on-line desalting column can effectively desalt proteins prior to LC-MS analyses. Because non-volatile salts (e.g., NaCl) cansuppress ionization of intact proteins leading to poor detection sensitivity, it is important to remove or significantly minimize the introduction ofthese compounds into the mass analyzer. The reversed-phase phenyl material contained in MassPREP on-line column successfully “traps” proteins,allowing the salts to be washed to waste prior to protein elution into the mass spectrometer. With an optimized LC-MS method, cycle times as lowas 4 minutes (for intact antibody) and 10 minutes (for reduced antibody) are achievable."

186004032 - MassPREP Micro Desalting Column
Part Number: 186004032
Brand: MassPrep

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Chemistry Phenyl
Endfitting Type Direct-Connect
Format Direct Connect Column
ID 2.1 mm
Length (mm) 5 mm
Mode Reversed-Phase
Molecular Weight Range 10K - 1M
Particle Shape Spherical
Particle Size (dp) 20 µm
Particle Substrate Polymethacrylate
Pore Size 1000Å
Units in Package 1/pkg
pH Range 2 - 12

info

WAT036991 - CIAPak MBT Solution

Part Number: WAT036991

For Capillary Ion Analysis: Electro-Osmotic Flow modifier for working electrlyte

WAT036991 - CIAPak MBT Solution
Part Number: WAT036991
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Environment
Product Type Additives
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

700002754 - Capillary Tube, 300µm Column Inlet

Part Number: 700002754

The 300µm column inlet capillary tube fits into the 5000psi and 10,000psi nanoACQUITY system.

700002754 - Capillary Tube, 300µm Column Inlet
Part Number: 700002754
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category nanoACQUITY
Products High Pressure nanoACQUITY UPLC Sample Manager
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

WAT073109 - Syringe, 250µL (Standard)

Part Number: WAT073109

This autosampler syringe is manufactured with tight specifications in barrel size, shape, and wall smoothness for maximum accuracy and consistency in injection volume. The syringe features a plunger seal that is designed specifically for the Waters autosampler, and a top seal made of a unique material that ensures a reliable seal in the manifold and a leak-free connection. This syringe is used in Waters 717 Autosampler and in the 2690/2695, 2690D/2695D Separations Module, as well as the LC Module 1 system.

WAT073109 - Syringe, 250µL (Standard)
Part Number: WAT073109
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
LC Module 1

info

WAT027060 - Porapak Q 80-100 mesh, 26 grams

Part Number: WAT027060

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027060 - Porapak Q 80-100 mesh, 26 grams
Part Number: WAT027060
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings