Product Listing:  700004216 - Cone Gas Nozzle   to   186003519 - Oasis WAX Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk

Sorted by Popularity
  Product    
info

700004216 - Cone Gas Nozzle

Part Number: 700004216

This spare part is a Waters Quality part

700004216 - Cone Gas Nozzle
Part Number: 700004216
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
SPECVALUE134881948
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

186002643 - 96-well Sample Collection Plate, Round well, Polypropylene 350µL 100/pkg

Part Number: 186002643

Waters offers a selection of 96-and 384-well sample/collection plates along with cap mats and heat seals.

186002643 - 96-well Sample Collection Plate, Round well, Polypropylene 350µL 100/pkg
Part Number: 186002643
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2795
Waters Acquity
Certified Not Certified
Format 96 Well Plates
Units in Package 100/pkg
Volume Capacity 350 µL

info

WAT270926 - Seal Wash Pump Solenoid

Part Number: WAT270926

This spare part is a Waters Quality part

WAT270926 - Seal Wash Pump Solenoid
Part Number: WAT270926
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
ACQUITY H-Class Quaternary Solvent Manager
Replacement Schedule As Needed

info

700005350 - Sample Cone - 0.8mm

Part Number: 700005350

This spare part is a genuine Waters Quality Part

700005350 - Sample Cone - 0.8mm
Part Number: 700005350
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SYNAPT G2 MS System
Xevo TQ-S MS
Replacement Schedule As Needed

info

WAT054240 - Symmetry C8 Cartridge, 100Å, 5 µm, 3.9 mm X 50 mm, 1/pkg

Part Number: WAT054240

Symmetry C8 columns feature monofunctionally bonded C8 ligands on a high purity base-deactived silica. Symmetry columns have the tightest column specifications in the industry giving resulting highly reproducible chromatographic results. This product needs to be used in conjunction with other parts. Please see the section below on related parts for more information.

WAT054240 - Symmetry C8 Cartridge, 100Å, 5 µm, 3.9 mm X 50 mm, 1/pkg
Part Number: WAT054240
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 11.7
Chemistry C8
Endcapped Yes
Format Cartridge
ID 3.9 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 8

info

430002242 - Tubing, Capillary w/ Frit 25µ x 18in.

Part Number: 430002242

This Capillary Tubing connects the BSM to the inject valve of the nanoACQUITY UPLC in the Direct Injection Configuration and the Single Pump Trapping Configuration. It also connects the Trap Valve with the MM union on the nanoACQUITY UPLC in the Dual Pump Trapping Configuration and the 2D Configuration. To see the Fluidic Configurations for the nanoACQUITY UPLC, go to the Url Link below, under Systems select nanoACQUITY, click on the Waters Graphical Part Locator, and then choose Fluidic Configurations on the right side of the page. There will be the six different configurations of the nanoACQUITY that you can click on individually to see a larger image. There will also be a parts list for that specific configuration on the right side of the page. This part number was originally p/n 430001564and then was changed to the new part number, p/n 430002242.

430002242 - Tubing, Capillary w/ Frit 25µ x 18in.
Part Number: 430002242
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category nanoACQUITY
Products High Pressure nanoACQUITY UPLC Sample Manager
nanoACQUITY UPLC with 2D Technology
Replacement Schedule As Needed

info

700001237 - ZQ/ Quattro Micro Sample Cone

Part Number: 700001237

This spare part is a Waters Quality part

700001237 - ZQ/ Quattro Micro Sample Cone
Part Number: 700001237
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
Quattro micro Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule No
sparepartsystemscategory LCMS

info

700003105 - SQD Set Up Solution

Part Number: 700003105

Mass Spectrometry (SQD) standards kit for system assessment. 1 x 10ml Set-up Solution QP: PPG 1000 2.5 ng/ul, Triacetyl-B-cyclodextrin 5.0 ng/ul, verapamil 100.0 pg/ul, ammonium acetate 0.31 mg/ml, Leucine Enkaphalin 1 ng/ul all in Acetonitrile/Water(1:1v/v)in brown Nalgene bottle Certificate of Analysis

700003105 - SQD Set Up Solution
Part Number: 700003105
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid
Storage Room temp
System LC/MS

info

186002051 - Oasis MCX 2.1 X 20 mm Online Cartridge Column, 30 µm Particle Size, 1/pk

Part Number: 186002051

The Oasis MCX on-line cartridge column is designed for rugged, reproducible, and ultra-fast on-line SPE. This cartridge column contains the Oasis MCX sorbent, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. This on-line cartridge column is designed to be used with the appropriate Waters narrow-bore analytical column, such as XSelect, XBridge, SunFire, Atlantis, XTerra, or Symmetry column. The Oasis MCX on-line cartridge column fits into a Sentry holder that features a finger-tight fitting for fast, convenient replacement.

186002051 - Oasis MCX 2.1 X 20 mm Online Cartridge Column, 30 µm Particle Size, 1/pk
Part Number: 186002051
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry MCX
Format/Type Online Cartridge Column
Ion Exch. Capacity 1 meq/gram
Length 20 mm
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Units In Package 1/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

WAT200535 - Solvent Filter, PTFE, 47 mm, 0.2 µm, Non polar, 100/pkg

Part Number: WAT200535

This PTFE membrane is a good choice for use with aggresive organic solvents

WAT200535 - Solvent Filter, PTFE, 47 mm, 0.2 µm, Non polar, 100/pkg
Part Number: WAT200535
Products > Chromatography Consumables & Columns > Laboratory Filters
Diameter 47 mm
Format Solvent Filter
Pore Size 0.2 µm
Separation Mode Non polar
Solvent/Sample Compatible PTFE
Units in Package 100/pkg

info

WAT200534 - Solvent Filter, PTFE, 47 mm, 0.45 µm, Non polar, 100/pkg

Part Number: WAT200534

This PTFE membrane is a good choice for use with aggresive organic solvents

WAT200534 - Solvent Filter, PTFE, 47 mm, 0.45 µm, Non polar, 100/pkg
Part Number: WAT200534
Products > Chromatography Consumables & Columns > Laboratory Filters
Diameter 47 mm
Format Solvent Filter
Pore Size 0.45 µm
Separation Mode Non polar
Solvent/Sample Compatible PTFE
Units in Package 100/pkg

info

WAT022384 - 1/16in. OD S.S. Tubing Cutter w/3 Blades

Part Number: WAT022384

The tubing cutter scores the outer diameter of 1/16 inch OD stainless steel tubing, making it easier to break apart the tubing. A straight, clean cut is of utmost importance when cutting stainless steel tubing. If the tubing is jagged or bent, it makes it difficult to fit the ferrule onto the tubing and will result in either bandspreading or dead volume.

WAT022384 - 1/16in. OD S.S. Tubing Cutter w/3 Blades
Part Number: WAT022384
Products > Chromatography Consumables & Columns > Accessories > Tubing

The tubing cutter scores the outer diameter of 1/16 inch OD stainless steel tubing, making it easier to break apart the tubing. A straight, clean cut is of utmost importance when cutting stainless steel tubing. If the tubing is jagged or bent, it makes it difficult to fit the ferrule onto the tubing and will result in either bandspreading or dead volume.

info

700009087 - Sample Cone, Xevo G2 (-S/XS)

Part Number: 700009087

Sample Cone, aperture diameter 0.67mm, St. Stl.

700009087 - Sample Cone, Xevo G2 (-S/XS)
Part Number: 700009087
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SPECVALUE134881948
Xevo G2-S
Replacement Schedule As Needed

info

WAT010740 - AccellPlus CM 100 G

Part Number: WAT010740

Accell Plus ion exchange packings are 40µm, 300 angstrom polymer-coated silica-based materials and are available in strong anion and weak cation exchangers. These packings, for all preparative isolations based on ionic interactions, particularly proteins, enzymes and immunoglobulins and be packed into our Advanced Purification (AP) glass columns.

WAT010740 - AccellPlus CM 100 G
Part Number: WAT010740
Brand: AccellPlus

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > AccellPlus Ion Exchange Packings
Application Protein
Chemistry Cation-exchange
Format Bulk 100gm
Mode Ion-Exchange
Molecular Weight Range 10K - 500K
Particle Shape Spherical
Particle Size (dp) 40 µm
Particle Substrate Silica
Pore Size 300Å
Units in Package 1/pkg
pH Range 2 - 9

info

186004835 - Graphitized Carbon Black, 25g Bottle

Part Number: 186004835

Graphitized carbon black effectively removes pigments and can be added to the clean-up tube with PSA and MgSO4 during the d-SPE cleanup step.

186004835 - Graphitized Carbon Black, 25g Bottle
Part Number: 186004835
Brand: DisQuE

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Dispersive
Mass Spec Compatibility Mass Spec Compatible
Units In Package 1/pkg

info

700000337 - ESI Probe Tip Assy

Part Number: 700000337

This spare part is a Waters Quality part

700000337 - ESI Probe Tip Assy
Part Number: 700000337
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products 3100 Mass Detector
EMD 1000 Mass Spectrometer
LCT Mass Spectrometer
LCT Premier
LCT Premier XE
Q-Tof II Mass Spectrometer
Q-Tof 1 Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof Premier Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro Mass Spectrometer
SYNAPT™ MS
Single Quad Detector
Synapt High Definition MS System™
Tandem Quadrupole Detector
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed

info

700000565 - 2790/2795 Syringe, 500µL (std)

Part Number: 700000565

The 2790 Separations Module is equipped with a standard 500µL syringe. This syringe, coupled with the standard 50µL sample loop and 128µL holding loop provides good accuracy and repeatability performance in a short amount of time for typical chromatographic sample volumes (5 to 50µL).

700000565 - 2790/2795 Syringe, 500µL (std)
Part Number: 700000565
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
2796 Bioseparations Module
Replacement Schedule As Needed

info

WAT271019 - Seal Pack Rebuild Kit w/Needle

Part Number: WAT271019

The Seal Pack Rebuild Kit includes all of the parts necessary to replace seals in the seal body, including the high pressure seals. Replacement of these seals requires use of HPMV Tool Kit (WAT045427). The Rebuild Kit includes: one Teflon washer, one needlewash filter, one upper spacer, one lower spacer, one alignment tube, one wash tube seal, one needle, two high pressure seals, one compression screw, and one ferrule.

WAT271019 - Seal Pack Rebuild Kit w/Needle
Part Number: WAT271019
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

700002596 - UPLC Primary Check Valve Assy., 2/pkg

Part Number: 700002596

The UPLC Primary Check Valve fits into the ACQUITY UPLC ACQUITY I-Class and the nanoACQUITY UPLC. The original part number was 700002704 and it was changed to p/n 700002596. This is a spring-loaded check valve.

700002596 - UPLC Primary Check Valve Assy., 2/pkg
Part Number: 700002596
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category ACQUITY
nanoACQUITY
Products ACQUITY I-Class BSM
ACQUITY UPLC Binary Solvent Manager
High Pressure nanoACQUITY UPLC Binary Solvent Manager/Auxillary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

WAT088070 - µBondapak C18 Guard-Pak Insert, 125Å, 10 µm, 10/pkg

Part Number: WAT088070

µBondapak C18 columns are general purpose, silica-based, reversed-phase C18 columns that are based on 10 µm particle technology. As a starting point for preparative chromatography, no other column can provide the balance between resolution, throughput and cost.

WAT088070 - µBondapak C18 Guard-Pak Insert, 125Å, 10 µm, 10/pkg
Part Number: WAT088070
Brand: µBondapak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry C18
Format Guard-Pak Insert
Mode Reversed-Phase
Particle Size (dp) 10 µm
Pore Size 125Å
Units in Package 10/pkg

info

186001880 - Oasis HLB 3 cc Flangeless Vac Cartridge, 60 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk

Part Number: 186001880

The 3 cc flangeless Oasis HLB cartridges contain the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent that was developed for the extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The flangeless configuration allows the cartridges to be closely packed for processing in specialized automated SPE systems.

186001880 - Oasis HLB 3 cc Flangeless Vac Cartridge, 60 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk
Part Number: 186001880
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry HLB
Format/Type Flangeless Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 60 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

430002183 - Tubing, Capillary 25µm x 10in.

Part Number: 430002183

This capillary tubing is used for the in and out connections on the first dimension column in the nanoACQUITY UPLC 2D with Dilution Configuration. To see the Fluidic Configurations for the nanoACQUITY UPLC, go to the Url Link below, under Systems select nanoACQUITY, click on the Waters Graphical Part Locator, and then choose Fluidic Configurations on the right side of the page. There will be the six different configurations of the nanoACQUITY that you can click on individually to see a larger image. There will also be a parts list for that specific configuration on the right side of the page.

430002183 - Tubing, Capillary 25µm x 10in.
Part Number: 430002183
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category nanoACQUITY
Products nanoACQUITY UPLC with 2D Technology
Replacement Schedule As Needed

info

700008842 - TOF G2-S Sample Kit -1

Part Number: 700008842

Standards Kit for the verification of system performance for Tof G2-S Contains: Standard 1: 2 vials of 3 mg Leucine Enkephalin, Standard 2: 2 vials of 0.1 mg [Glu1]-Fibrinopeptide B, Standard 3: 1 vial of 1 nmole MassPREP™ Digestion Standard, Alcohol Dehydrogenase, Standard 4: 1 vial of 1 nmole MassPREP™ Digestion Standard, Enolase

700008842 - TOF G2-S Sample Kit -1
Part Number: 700008842
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid & Solid
Storage Frozen -20 C
System LC/MS

info

WAT015220 - Nova-Pak C18 Guard-Pak Insert, 60Å, 4 µm, 10/pkg

Part Number: WAT015220

Nova-Pak C18 columns are general purpose, silica-based, reversed-phase C18 columns that are based on 4 µm particle technology. Compared to a 5 µm column, Nova-Pak columns offer higher resolution, more efficient separations, and faster chromatography.

WAT015220 - Nova-Pak C18 Guard-Pak Insert, 60Å, 4 µm, 10/pkg
Part Number: WAT015220
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry C18
Format Guard-Pak Insert
Particle Size (dp) 4 µm
Pore Size 60Å
System HPLC
Units in Package 10/pkg

info

205000362 - Needle, Stainless Steel, 30µL

Part Number: 205000362

This spare part is a Waters Quality part

205000362 - Needle, Stainless Steel, 30µL
Part Number: 205000362
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
nanoACQUITY
Products ACQUITY UPLC Sample Manager
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

186001728 - Insert, polypropylene, 200uL with polyspring for 8x40 vial, 1000pk

Part Number: 186001728

Vial inserts are a solution in applications where there is limited sample volume. Choose the appropriate volume insert for your sample volume and vial size.

186001728 - Insert, polypropylene, 200uL with polyspring for 8x40 vial, 1000pk
Part Number: 186001728
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 700 Series
Certified Not Certified
Format Low Volume Inserts and Springs
Units in Package 1000/pkg
Volume Capacity 200 µL

info

WAT022999 - Peek Tubing and Fitting Kit

Part Number: WAT022999

The PEEK Tubing and Fitting Kit includes the following: 12 PEEK ferrules, 6 compression screws 10-32 long, 6 compression screws 10-32 short, one PEEK tubing .005in. x 1/16in. x 60in., one PEEK tubing .010in. x 1/16in. x 60in., and 12 compression screw knobs

WAT022999 - Peek Tubing and Fitting Kit
Part Number: WAT022999
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK Tubing
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

700003798 - 2998 Analytical Flowcell Rebuild Kit

Part Number: 700003798

This spare part is a Waters Quality part

700003798 - 2998 Analytical Flowcell Rebuild Kit
Part Number: 700003798
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2998 Photodiode Array Detector
Replacement Schedule As Needed

info

700001229 - V3, Solenoid Valve Assembly

Part Number: 700001229

The Waste Valve, V3 is a two-way solenoid valve, similar, but not identical to the V3 solenoid valve used in the 717 Autosampler. The major difference in the 2690 waste valve is a change in the direction of flow through the valve to improve valve performance.

700001229 - V3, Solenoid Valve Assembly
Part Number: 700001229
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

186003519 - Oasis WAX Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk

Part Number: 186003519

The 1 cc Oasis WAX cartridges contain the Oasis WAX sorbent, which is a polymeric reversed-phase, weak anion exchange mixed-mode sorbent that has been optimized for fast, simple, and highly selective sample preparation of strong acidic compounds. Since the Oasis WAX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186003519 - Oasis WAX Plus Short Cartridge, 225 mg Sorbent per Cartridge, 60 µm Particle Size, 50/pk
Part Number: 186003519
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry WAX
Format/Type Plus Short Cartridge
Ion Exch. Capacity 0.6 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 225 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH