Product Listing:  700008977 - Assy Needle 15µL w/guide and seat 18KPSI   to   186002542 - SunFire C18 Column, 100Å, 3.5 µm, 3 mm X 50 mm, 1/pkg

Sorted by Popularity
  Product    
info

700008977 - Assy Needle 15µL w/guide and seat 18KPSI

Part Number: 700008977

ACQUITY I-Class FTN Needle Assembly, 15µL w/guide and seat 18KPSI

700008977 - Assy Needle 15µL w/guide and seat 18KPSI
Part Number: 700008977
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Needles
Product Category ACQUITY
Products ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

186004498 - XBridge Protein BEH C4 Column, 300Å, 3.5 µm, 2.1 mm X 50 mm, 10K - 500K, 1/pkg

Part Number: 186004498

Waters Protein Separation Technology (PrST) columns are QC tested and optimized to separate proteins based on size, hydrophobicity and isoelectric point. If you compare traditional to C18 phases, the C4 ligand is less retentive and will minimize protein carryover, increase protein recovery and improve peak capacity.

186004498 - XBridge Protein BEH C4 Column, 300Å, 3.5 µm, 2.1 mm X 50 mm, 10K - 500K, 1/pkg
Part Number: 186004498
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns > XBridge Columns
Application Protein
Chemistry C4
Endcapped No
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 50 mm
Mode Reversed-Phase
Molecular Weight Range 10K - 500K
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 300Å
QC Tested Protein
Silanol Activity Low
System HPLC
Technology BEH
USP Classification L26
Units in Package 1/pkg
pH Range 2 - 12

info

WAT011794 - DeltaPak C4 Column, 300Å, 5 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: WAT011794

Delta-Pak packings, ideal for the separation of peptides, proteins, and natural products, are based on a highly stable, bonded, endcapped 5µm or 15µm spherical silica. Delta-Pak is available in two different pore sizes (100Å and 300Å) with either C4 or C18 bonded phase. Delta-Pak packings are available in different cartridge and column configurations, providing consistent and predictable scale-up capabilities for milligram-to-gram scale purification. Also, by having the same chemistry available on a high-efficiency 5µm particle, you can easily check the purity of your fractions.

WAT011794 - DeltaPak C4 Column, 300Å, 5 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT011794
Brand: DeltaPak

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Peptide Separations > Delta-Pak Columns
% Carbon Load 2.6
Application Protein
Chemistry C4
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 300Å
Surface Area 125
USP Classification L26
Units in Package 1/pkg
pH Range 2 - 8

info WAT011795 - DeltaPak C18 Column, 100Å, 5 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT011795
Brand: DeltaPak

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Peptide Separations > Delta-Pak Columns
% Carbon Load 17
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

700003530 - Solvent Filter, Titanium, 7/pkg

Part Number: 700003530

The Titanium Solvent Bottle Filters are optional for use where mobile phases contain acids.

700003530 - Solvent Filter, Titanium, 7/pkg
Part Number: 700003530
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Product Category ACQUITY
Products ACQUITY I-Class BSM
ACQUITY UPLC Binary Solvent Manager
Replacement Schedule As Needed

info

186007473 - ACQUITY UPLC M-Class HSS T3 Column, 1.8 µm, 75 µm X 150 mm, 1/pkg

Part Number: 186007473

ACQUITY UPLC M-Class Columns are designed for optimal performance for nano- to micro scale liquid chromatographic separation, offering the highest possible sensitivity, resolution and reproducibility for biomarker discovery and protein identification and characterization. The 300µm ID columns are built utilizing a ultra low dispersion column design and offer the same simplicity of use as more traditional columns. Like all M-Class columns they withstand 15kpsi operating pressure and handle pressure fluctuations during injection extremely well and thus provide superior longevity. In order to achieve maximum performance, it is important to ensure that proper connections are made to minimize peak tailing and poor efficiency. This specific offering contains Waters patented BEH Technology 130A pore, C18, 1.7um particles. Each batch is specifically QC tested using a gradient separation of a tryptic digest of cytochrome c to before being QC accepted as a Peptide separation column.

186007473 - ACQUITY UPLC M-Class HSS T3 Column, 1.8 µm, 75 µm X 150 mm, 1/pkg
Part Number: 186007473
Brand: ACQUITY UPLC M-Class

Products > Chromatography Consumables & Columns > Columns
% Carbon Load 11
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type 10-32 for 1/16" male /360um open
Format Column
ID 75 µm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.8 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 230
System Nano/Micro
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

700003276 - Q-Tof Qualification Standards Kit

Part Number: 700003276

Mass Spectrometry (QToF) standards kit for system assessment. 11 Components: 1. 2 x Vials Leucine Enkephalin 3 mg ±0.15 mg 12 mL Amber Screw top Vial 2. 1 x 25mL Sodium Iodide 25mL 2 µg/µL in 50:50 2-Propanol: Water 30 mL Clear Nalgene Bottle 3. 1 x 12mL Bovine Insulin 3 mg ±0.15 mg 12 mL Amber Screw-top Vial 4. 2 x 15mL Horse Heart Myoglobin 2.5 mg ±0.125 mg 15 mL Clear Nalgene Bottle 5. 2 x 15mL D(+)-Raffinose 2.5 mg ±0.125 mg 15 mL Clear Nalgene Bottle 6. 2 x 4mL [Glu1]-Fibrinopeptide B 0.1 mg ±0.01 mg 4 mL Amber Screw top Vial 7. 1 x 4mL Sodium Hydroxide 2mL 0.1M in Water 4 mL Clear Nalgene Bottle 8. 1x 15mL Haemoglobin (Human) 2.52 mg ±0.125 mg 15 mL Clear Nalgene Bottle 9. 5 x Vials ? - Cyano-4-hydroxycinnamic acid* 10 mg ±0.1 mg Each vial in a sealed foil bag Matrix 10. 1 x 2mL PEG Mix** 2mL 50:50 Acetonitrile: Water +0.2 % Formic 2mL Amber Flame-sealed Ampule w/ cracker PEG Ready Mixed Solution 11. 1 x 2mL PEG Maldi*** 10 mg/mL 50:50 Acetonitrile: Water 2mL Amber Flame-sealed Ampule w/ cracker PEG Maldi Ready Mixed Solution Certificate of Analysis

700003276 - Q-Tof Qualification Standards Kit
Part Number: 700003276
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Instrument Performance
Detector Mass Spec
Product Type Standard
Shipping Formulation Liquid
Storage Frozen -20 C
System LC/MS

info

700000336 - ESI Probe Spares Kit

Part Number: 700000336

This kit contains the parts required to perform regular maintenance on the ESI probe

700000336 - ESI Probe Spares Kit
Part Number: 700000336
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products LCT Mass Spectrometer
Q-Tof II Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Tandem Quadrupole Detector
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule Annually

info

186002632 - 384-well Sample Collection Plate, Square well, Polypropylene 250µL 50/pkg

Part Number: 186002632

Waters offers a selection of 96-and 384-well sample/collection plates along with cap mats and heat seals.

186002632 - 384-well Sample Collection Plate, Square well, Polypropylene 250µL 50/pkg
Part Number: 186002632
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2795
Waters Acquity
Certified Not Certified
Format 384 Well Plates
Units in Package 50/pkg
Volume Capacity 250 µL

info

PSS832315 - Spherisorb Amino (NH2) Column, 80Å, 3 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: PSS832315

Spherisorb NH2 (Amino) columns contain a silica-based aminopropyl bonded sorbent. The column is listed as USP L8 and is used for anion-exchange, normal-phase and HILIC separations.

PSS832315 - Spherisorb Amino (NH2) Column, 80Å, 3 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: PSS832315
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 1.9
Chemistry Amino (NH2)
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L8
Units in Package 1/pkg
pH Range 2 - 8

info

186007273 - XBridge Glycan BEH Amide Column, 130Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg

Part Number: 186007273

Waters BEH-based Glycan chemistry offerings are available in three highly scalable particle sizes that address UPLC (i.e, 1.7 µm) and HPLC-based (2.5 µm XP and 3.5 µm) application needs. Each batch of BEH Glycan material is specifically quality control tested with the 2-AB labeled, Waters Glycan Performance standard to help ensure batch to batch consistency as well as highly similar separated glycan profiles. To help ensure highly similar results, chromatographers can now choose the most appropriate LC-based technology to address their specific released glycan analysis application needs and laboratory instrumentation.

186007273 - XBridge Glycan BEH Amide Column, 130Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg
Part Number: 186007273
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns > XBridge Columns
% Carbon Load 12
Application Glycan
Chemistry Amide
Endcapped No
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Hydrophilic Interaction (HILIC)
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 130Å
QC Tested Glycan
Silanol Activity Low
Surface Area 185
System HPLC
Technology BEH
Units in Package 1/pkg
pH Range 2 - 11

info

WAT270966 - Pressure Transducer

Part Number: WAT270966

The strain gauge transducer is the most advanced and reliable pressure-detection device in the industry today. As compared with the Bourdon tube transducer, it offers enhanced accuracy and linearity and contains no light bulbs or moving parts to fail. This strain gauge transducer is used in the 515 HPLC Pump as well as the 2690, 2690D, and 2790 Separations Modules.

WAT270966 - Pressure Transducer
Part Number: WAT270966
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Pumps
Separations Module
Products 1515 HPLC Pump
1525 HPLC Pump
2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
515 HPLC Pump
Replacement Schedule As Needed

info

WAT200523 - Acrodisc, Syringe Filter, Nylon, 25 mm, 0.2 µm, Aqueous, 200/case

Part Number: WAT200523

This nylon membrane works well with both aqueous and organic solvents.

WAT200523 - Acrodisc, Syringe Filter, Nylon, 25 mm, 0.2 µm, Aqueous, 200/case
Part Number: WAT200523
Brand: Acrodisc

Products > Chromatography Consumables & Columns > Laboratory Filters
Diameter 25 mm
Format Syringe Filter
Hold-up Volume < 100 µL
Housing Polypropylene
Pore Size 0.2 µm
Sample Volume < 100 mL
Separation Mode Aqueous
Solvent/Sample Compatible Nylon
Units in Package 200/case

info

PSS832213 - Spherisorb C8 Column, 80Å, 3 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: PSS832213

Spherisorb C8 columns are general purpose, silica-based reversed-phase columns that contain an Octyl ligand. These USP L7 columns are used when you require a less retentive sorbent compared to the Spheriorb ODS columns.

PSS832213 - Spherisorb C8 Column, 80Å, 3 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: PSS832213
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 5.8
Chemistry C8
Endcapped Yes
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3 µm
Particle Substrate Silica
Pore Size 80Å
Silanol Activity Medium
Surface Area 220
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 8

info

WAS081346 - 10 mm Flow Cell Rebuild Kit

Part Number: WAS081346

The 10mm Flow Cell Rebuild Kit contains the following parts: two lens screws, one entrance lens washer, one entrance lens (curved), ten gaskets, one exit window (flat), one exit lens washer, one cuvette lens screw, one cuvette lens, and one cuvette lens holder.

WAS081346 - 10 mm Flow Cell Rebuild Kit
Part Number: WAS081346
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector
Replacement Schedule As Needed

info

700006045 - TRANSDUCER, PRESSURE

Part Number: 700006045

This spare part is a Waters Quality part.

700006045 - TRANSDUCER, PRESSURE
Part Number: 700006045
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
nanoACQUITY
Products ACQUITY APC pISM
ACQUITY I-Class BSM
ACQUITY M-Class µASM
ACQUITY M-Class µBSM
ACQUTY Isocratic Solvent Manager
Replacement Schedule As Needed

info

WAT010025 - Nova-Pak Silica Column, 60Å, 4 µm, 3.9 mm X 150 mm, 1/pkg

Part Number: WAT010025

Nova-Pak Silica columns are general purpose, normal-phase columns that are based on 4 µm particle technology. Compared to a 5 µm column, Nova-Pak columns offer higher resolution, more efficient separations, and faster chromatography.

WAT010025 - Nova-Pak Silica Column, 60Å, 4 µm, 3.9 mm X 150 mm, 1/pkg
Part Number: WAT010025
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Silica
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 150 mm
Mode Normal-Phase
Particle Shape Spherical
Particle Size (dp) 4 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity High
Surface Area 120
System HPLC
USP Classification L3
Units in Package 1/pkg
pH Range 2 - 8

info

6061146-S - TIP SEAL KIT XDS35i / XDS100B

Part Number: 6061146-S

The Tip Seal Kit is part of the vacuum components on the Scroll Pump XDS35i.

6061146-S - TIP SEAL KIT XDS35i / XDS100B
Part Number: 6061146-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Vacuum fittings/components
Product Category Mass Spectrometry
Products LCT Premier XE
Q-Tof Premier Mass Spectrometer
Quattro Premier Mass Spectrometer
Synapt High Definition MS System™
Replacement Schedule As Needed

info JJAN21018 - Puresil C18, 4.6x250mm column
Part Number: JJAN21018
Products > Chromatography Consumables & Columns > Accessories

info

WAS207006 - Assembly, Pump Head (w/check valves)

Part Number: WAS207006

An integral part of the Waters 1515 and 500 series pumps, the Pump Head Assembly is made from the highest quality stainless steel and comes complete with the inlet/outlet check valve and the Clear-100 Plunger Seal already installed. The Pump Head is rigorously tested for supperior performance.

WAS207006 - Assembly, Pump Head (w/check valves)
Part Number: WAS207006
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
Replacement Schedule As Needed

info

186000432 - XTerra MS C18 Column, 125Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg

Part Number: 186000432

XTerra MS C18 columns are general purpose, hybrid-based, reversed-phase C18 columns that are designed to be compatible with mass spectrometry applications. These first generation columns provide superior pH stability compared to a silica-based column.

186000432 - XTerra MS C18 Column, 125Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg
Part Number: 186000432
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15.5
Bonding Technology MS C18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

186000435 - XTerra RP 8 Column, 125Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg

Part Number: 186000435

XTerra RP8 columns are general purpose, hybrid-based, reversed-phase C8 columns that incorporate Waters patented embedded polar group technology to improve peak shape performance for highly basic compounds. These first generation columns provide superior pH stability compared to a silica-based column.

186000435 - XTerra RP 8 Column, 125Å, 3.5 µm, 4.6 mm X 50 mm, 1/pkg
Part Number: 186000435
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 13.5
Bonding Technology RP 8
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 12

info

700000310 - Z Spray Sample Cone

Part Number: 700000310

This spare part is a Waters Quality part.

700000310 - Z Spray Sample Cone
Part Number: 700000310
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products LCT Mass Spectrometer
Q-Tof II Mass Spectrometer
Q-Tof 1 Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
ZMD Mass Spectrometer
Replacement Schedule As Needed

info

WAT044375 - Nova-Pak C18 Column, 60Å, 4 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: WAT044375

Nova-Pak C18 columns are general purpose, silica-based, reversed-phase C18 columns that are based on 4 µm particle technology. Compared to a 5 µm column, Nova-Pak columns offer higher resolution, more efficient separations, and faster chromatography.

WAT044375 - Nova-Pak C18 Column, 60Å, 4 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: WAT044375
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 7.3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 4 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity Medium
Surface Area 120
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT085650 - DEXTRO-PAK 8MM X 10

Part Number: WAT085650
WAT085650 - DEXTRO-PAK 8MM X 10
Part Number: WAT085650
Products > Chromatography Consumables & Columns > Accessories

info

186007080 - GlycoWorks HILIC 1cc Cartridge, 20/pkg

Part Number: 186007080

The GlycoWorks HILIC 1cc Cartridge Pack contains 20 1cc cartridges for a total of 10 reactions for low sample volume environments. The cartridges are dual purpose; they can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each cartridge is packed with 10 mg of Waters HILIC Solid Phase Extraction (SPE).

186007080 - GlycoWorks HILIC 1cc Cartridge, 20/pkg
Part Number: 186007080
Brand: GlycoWorks

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Column Chemistry HILIC
Detector Fluorescence (FLR)
Packaging 20/pkg
Product Type Kit
Shipping Formulation Liquid & Solid
Storage Room temp
System LC/MS

info

700000253 - PerformancePLUS™ Cartridge Check Valve System

Part Number: 700000253

The PerformancePLUS Cartridge Check Valve System can be used as either an inlet or outlet valve in the Waters 1515, 1525, 515, and 600, and 610 HPLC pumps. The check valve materials have been carefully specified for solvent compatibility with all HPLC mobile phases. The housing features a two-piece design that allows it to be removed so that the cartridge can be changed without disturbing the fitting on the housing. The PerformancePLUS Cartridge Check Valve System is sold in a package of two valve cartridges and two housings Replacement cartridges are available in pairs [Part Number 700000254]. The housing part number is 700001108 and is also sold in pairs.

700000253 - PerformancePLUS™ Cartridge Check Valve System
Part Number: 700000253
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
Replacement Schedule Annually

info

700005347 - Cartridge Heater for Ceramic Block

Part Number: 700005347

Cartridge heater for ion block.

700005347 - Cartridge Heater for Ceramic Block
Part Number: 700005347
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Mass Spectrometry
Products SYNAPT G2-S
SPECVALUE134881948
Xevo TQ-S MS
Replacement Schedule As Needed

info

186002508 - Oasis WAX 2.1 X 20 mm Online Column, 30 µm Particle Size, 1/pk

Part Number: 186002508

The Oasis WAX on-line column is designed for rugged, reproducible, and ultra-fast on-line SPE. This column contains the Oasis WAX sorbent, which is a polymeric reversed-phase, weak anion exchange mixed-mode sorbent that has been optimized for fast, simple, and highly selective sample preparation of strong acidic compounds. This on-line column is designed to be used with the appropriate Waters narrow-bore analytical column, such as XSelect, XBridge, SunFire, Atlantis, XTerra, or Symmetry column. The column features traditional HPLC column fittings and hardware.

186002508 - Oasis WAX 2.1 X 20 mm Online Column, 30 µm Particle Size, 1/pk
Part Number: 186002508
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry WAX
Format/Type Online Column
Ion Exch. Capacity 0.6 meq/gram
Length 20 mm
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Units In Package 1/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

186002542 - SunFire C18 Column, 100Å, 3.5 µm, 3 mm X 50 mm, 1/pkg

Part Number: 186002542

SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

186002542 - SunFire C18 Column, 100Å, 3.5 µm, 3 mm X 50 mm, 1/pkg
Part Number: 186002542
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 16
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 340
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8