Product Listing:  186003196 - MassPREP E. Coli Digest Standard   to   PSS832712 - Spherisorb SAX Column, 80Å, 5 µm, 4.6 mm X 100 mm, 1/pkg

Sorted by Best Sellers
  Product    
info

186003196 - MassPREP E. Coli Digest Standard

Part Number: 186003196

The MassPREP E.coli digestion standard (MPDS E.coli) is intended to provide a complex biological matrix for producing samples used to train new users of the Waters Protein Expression System. MPDS E. coli was prepared by digesting a purified E. coli cytosolic protein fraction with sequencing grade trypsin. The MPDS mixture is purified, and does not contain undigested protein, trypsin, or very hydrophilic components such as salts.

186003196 - MassPREP E. Coli Digest Standard
Part Number: 186003196
Brand: MassPrep

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents > Pharmaceutical and Life Science Standards & Kits > Peptide Standards & Kits > Peptide Standards and Kits
Applications Life Science
Detector Mass Spec
Product Type Standard
Shipping Formulation Solid
Storage Room temp
System LC/MS

info

430001784 - Inlet Tube Assembly

Part Number: 430001784

The original part number was p/n 430001226 and has been changed to p/n 430001784.

430001784 - Inlet Tube Assembly
Part Number: 430001784
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY UPLC PDA Detector
ACQUITY UPLC eLAmbda PDA Detector
Replacement Schedule As Needed

info

186003417 - SunFire C18 Column, 100Å, 2.5 µm, 4.6 mm X 50 mm, 1/pkg

Part Number: 186003417

SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

186003417 - SunFire C18 Column, 100Å, 2.5 µm, 4.6 mm X 50 mm, 1/pkg
Part Number: 186003417
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 16
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 340
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT200448 - RS-232 Cable

Part Number: WAT200448

This spare part is a Waters Quality part.

WAT200448 - RS-232 Cable
Part Number: WAT200448
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Cables
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
Replacement Schedule No

info

WAT062079 - Steel Column Heater 600

Part Number: WAT062079

The optional stainless steel column heater fits into the slide-out drawer of the 600 fluid handling unit and accomodates a single column up to 30cm in length.

WAT062079 - Steel Column Heater 600
Part Number: WAT062079
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Product Category Pumps
Products 600 MultiSolvent Delivery System
Replacement Schedule As Needed

info

WAT025604 - Compression Screws and Ferrules, 5/Pkg

Part Number: WAT025604

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which could damage valves and block columns.

WAT025604 - Compression Screws and Ferrules, 5/Pkg
Part Number: WAT025604
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

JJAN11565 - Ultrahydrogel Guard Column, 200Å, 6 µm, 6 mm X 40 mm, Water , 1/pkg

Part Number: JJAN11565

Ideal for the analysis of aqueous-soluble samples, such as; oligomers; oligosaccharides; polysaccharides; and cationic, anionic and amphoteric polymers.

JJAN11565 - Ultrahydrogel Guard Column, 200Å, 6 µm, 6 mm X 40 mm, Water , 1/pkg
Part Number: JJAN11565
Brand: Ultrahydrogel
Ultrahydrogel®

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Endfitting Type Parker-style
Format Guard Column
ID 6 mm
Length (mm) 40 mm
Mode SEC/GPC
Particle Shape Spherical
Particle Size (dp) 6 µm
Particle Substrate Polymer
Pore Size 200Å
Solvent Water
USP Classification L25
Units in Package 1/pkg
pH Range 2 - 12

info

186006939 - ACQUITY UPLC Peptide CSH C18 VanGuard Pre-column, 130Å, 1.7 µm, 2.1 mm X 5 mm, 3/pkg

Part Number: 186006939

Waters ACQUITY UPLC CSH130 C18 1.7 µm particles contain a low and carefully-defined concentration of positive charges that yield comparatively excellent peak shape for peptides using either FA- or TFA-containing mobile phases. The fact that the performance of a CSH130 C18 column exhibits little dependence on strong ion pairing agents makes it ideal for LC or LC-MS applications. The VanGuard pre-column connects directly to the inlet of an eXtended Performance column which minimizes extra columns volumes and reduces leaking by eliminating additional connections.

186006939 - ACQUITY UPLC Peptide CSH C18 VanGuard Pre-column, 130Å, 1.7 µm, 2.1 mm X 5 mm, 3/pkg
Part Number: 186006939
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 15
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format VanGuard Pre-column
ID 2.1 mm
Length (mm) 5 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
QC Tested Peptide
Silanol Activity Low
Surface Area 185
System UPLC/UHPLC
Technology CSH
USP Classification L1
Units in Package 3/pkg
pH Range 1 - 11

info

205000119 - Fraction Collector 28mm Rack Kit

Part Number: 205000119

The 28mm Fraction Collector Rack allows for the collection of samples into 28mm OD scintillation vials.

205000119 - Fraction Collector 28mm Rack Kit
Part Number: 205000119
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Injectors
Products 2757 Sample Manager
2767/2747 Sample Manager
Replacement Schedule As Needed

info

205000291 - Column Stabilizer Kit, 50/100mm

Part Number: 205000291

Column Stabilizer Kit, 50-100mm (original column heater)

205000291 - Column Stabilizer Kit, 50/100mm
Part Number: 205000291
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category ACQUITY
Products ACQUITY UPLC Column Heater Module
ACQUITY UPLC Column Heater/Cooler
Replacement Schedule As Needed

info

430001749 - ASSY, TUBE INLET .0025 ID LT PEEK NUT

Part Number: 430001749

The Inlet Tube Assembly fits on ACQUITY UPLC TUV Detectors with serial numbers through K05UPT699N and with serial numbers from K05UPT700N and later. This part number used to be 430001214.

430001749 - ASSY, TUBE INLET .0025 ID LT PEEK NUT
Part Number: 430001749
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY PDA (Taperslit) Detectors
ACQUITY UPLC TUV Detector
Replacement Schedule As Needed

info

205000362 - Needle, Stainless Steel, 30µL

Part Number: 205000362

This spare part is a Waters Quality part.

205000362 - Needle, Stainless Steel, 30µL
Part Number: 205000362
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
nanoACQUITY
Products ACQUITY UPLC Sample Manager
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

700002332 - PerformancePLUS Check Valve Housing

Part Number: 700002332

This spare part is a Waters Quality part.

700002332 - PerformancePLUS Check Valve Housing
Part Number: 700002332
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Separations Module
Products 2695 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

700002660 - Vent Valve/Trap Valve Cartridge

Part Number: 700002660

This spare part is a Waters Quality part.

700002660 - Vent Valve/Trap Valve Cartridge
Part Number: 700002660
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

186003535 - ACQUITY UPLC HSS T3 Column, 100Å, 1.8 µm, 1 mm X 50 mm, 1/pkg

Part Number: 186003535

The universal, silica-based bonded phase used for the ACQUITY HSS T3 sorbents is compatible with 100% aqueous mobile phase and should be your first choice when developing separations for polar and non-polar compounds. The ACQUITY HSS T3 UPLC columns exhibit ultra-low MS bleed and are fully scalable and transferable to HPLC separations.

186003535 - ACQUITY UPLC HSS T3 Column, 100Å, 1.8 µm, 1 mm X 50 mm, 1/pkg
Part Number: 186003535
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 11
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 1 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.8 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 230
System UPLC/UHPLC
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186008304 - ProteinWorks uElution SPE Clean-up Kit

Part Number: 186008304

The ProteinWorks uElution SPE Clean-up Kit is designed for post-digestion peptide clean-up in LC-MS protein quantification via the surrogate peptide approach. This kit includes an optimized SPE protocol and Oasis uElution technology delivering maximum peptide recovery and the removal of digest reagents and other matrix interferences. The uElution Clean-up kit enhances assay sensitivity and improves LC-MS system robustness.

186008304 - ProteinWorks uElution SPE Clean-up Kit
Part Number: 186008304
Brand: ProteinWorks

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector Mass Spec
Packaging 1/pkg
Product Type Kit
Shipping Formulation Solid

info

WAT200500 - Acrodisc, Syringe Filter, PTFE, 25 mm, 0.45 µm, Non polar, 50/pkg

Part Number: WAT200500

This PTFE membrane is a good choice for use with aggresive organic solvents

WAT200500 - Acrodisc, Syringe Filter, PTFE, 25 mm, 0.45 µm, Non polar, 50/pkg
Part Number: WAT200500
Brand: Acrodisc

Products > Chromatography Consumables & Columns > Laboratory Filters
Diameter 25 mm
Format Syringe Filter
Hold-up Volume < 100 µL
Housing Polypropylene
Pore Size 0.45 µm
Sample Volume < 100 mL
Separation Mode Non polar
Solvent/Sample Compatible PTFE
Units in Package 50/pkg

info

M702810AD1 - Inner Source Trap

Part Number: M702810AD1

This spare part is a Waters Quality part.

M702810AD1 - Inner Source Trap
Part Number: M702810AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products AutoSpec Premier Mass Spectrometer
GCT Mass Spectrometer
GCT Premier Mass Spectrometer
Quattro micro GC Mass Spectrometer
Replacement Schedule As Needed

info

186004620 - Certified Sep-Pak tC18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37-55 µm Particle Size, 30/pkg

Part Number: 186004620

Certified Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. Certified Sep-Pak C18 cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004620 - Certified Sep-Pak tC18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37-55 µm Particle Size, 30/pkg
Part Number: 186004620
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry TC18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186000302DV - Deactivated Clear Glass 12 x 32mm Snap Neck Total Recovery Vial, 1 mL Volume, 100/pkg

Part Number: 186000302DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

186000302DV - Deactivated Clear Glass 12 x 32mm Snap Neck Total Recovery Vial, 1 mL Volume, 100/pkg
Part Number: 186000302DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2695
Certified Not Certified
Closure Type Snap Neck
Dimensions 12 x 32mm
Format Total Recovery Vial
GlassType Deactivated Clear Glass
Units in Package 100/pkg
Volume Capacity 1 mL

info

201000174 - ACQUITY SAMPLE MANAGER PERFORMANCE MAINTENANCE KIT

Part Number: 201000174

The Waters® Performance Maintenance Kit for the ACQUITY Sample Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: air chassis filter, injector outlet tubes, needle, system outlet tubes, inject valve pod, wash syringe, injector syringe, sample loop and o-ring.

201000174 - ACQUITY SAMPLE MANAGER PERFORMANCE MAINTENANCE KIT
Part Number: 201000174
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Products ACQUITY UPLC Sample Manager
Replacement Schedule Annually

info

WAT021906 - AP-1 Glass Column, 10x600 mm, 1/pkg

Part Number: WAT021906

Waters Advanced Purification (AP) glass columns are constructed of biocompatible glass and polymeric materials for use with silica, polymer, or soft gel packings.

WAT021906 - AP-1 Glass Column, 10x600 mm, 1/pkg
Part Number: WAT021906
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 10 mm
Length (mm) 600 mm
Units in Package 1/pkg

info

6435001-S1 - PVC Tubing 19mm OD x 12mm ID, 1m

Part Number: 6435001-S1

This spare part is a Waters Quality part.

6435001-S1 - PVC Tubing 19mm OD x 12mm ID, 1m
Part Number: 6435001-S1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products AutoSpec Premier Mass Spectrometer
GCT Mass Spectrometer
LCT Premier
LCT Premier XE
Q-Tof API US Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Replacement Schedule As Needed

info

600000370 - Filter, 0.5µm, 24/pkg

Part Number: 600000370

This spare part is a Waters Quality part.

600000370 - Filter, 0.5µm, 24/pkg
Part Number: 600000370
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Filters
Product Category Systems
Replacement Schedule As Needed

info

176003596 - XBridge Protein BEH SEC Column, 200Å, 3.5 µm, 7.8 mm X 300 mm, and BEH 200Å Protein Standard Mix

Part Number: 176003596

This column and standard kit includes the BEH200 SEC Protein Standard Mix (P/N 186006518 ) and an Xbridge Protein BEH SEC 200A Column ideally suited for HPLC-based SEC separations.

176003596 - XBridge Protein BEH SEC Column, 200Å, 3.5 µm, 7.8 mm X 300 mm, and BEH 200Å Protein Standard Mix
Part Number: 176003596
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns > XBridge Columns
% Carbon Load 12
Application Protein
Chemistry SEC
Endcapped No
Endfitting Type Waters
Format Column
ID 7.8 mm
Length (mm) 300 mm
Mode SEC/GPC
Molecular Weight Range 10K - 500K
Particle Shape Spherical
Particle Size (dp) 3.5 µm
Particle Substrate Hybrid
Pore Size 200Å
QC Tested Protein
Silanol Activity Low
Surface Area 220
System HPLC
Technology BEH
USP Classification L33
Units in Package 1/pkg
pH Range 1 - 8

info

205000705 - TFA Mixer Assembly, 380 µL, Zirconia

Part Number: 205000705

ACQUITY TFA Mixer Assembly, 380 µL, Zirconia

205000705 - TFA Mixer Assembly, 380 µL, Zirconia
Part Number: 205000705
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY H-Class Bio Quaternary Solvent Manager
ACQUITY UPLC Binary Solvent Manager
Replacement Schedule As Needed

info

405008854 - Needle Guide

Part Number: 405008854

ACQUITY Sample Needle Guide

405008854 - Needle Guide
Part Number: 405008854
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Spacers
Product Category ACQUITY
Products ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

PSS832713 - Spherisorb SAX Column, 80Å, 5 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: PSS832713

Spherisorb SAX columns contain a silica-based quaternary ammonium bonded sorbent. The column is listed as USP L14 and is used for anion-exchange separations.

PSS832713 - Spherisorb SAX Column, 80Å, 5 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: PSS832713
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4
Chemistry SAX
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Ion-Exchange
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L14
Units in Package 1/pkg
pH Range 2 - 8

info

5314046-S - Screw, CH Head, M1.6 x 20, (20PK)

Part Number: 5314046-S

This spare part is a Waters Quality part.

5314046-S - Screw, CH Head, M1.6 x 20, (20PK)
Part Number: 5314046-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Nuts/bolts/screws
Product Category Mass Spectrometry
Products AutoSpec Premier Mass Spectrometer
Replacement Schedule As Needed

info

PSS832712 - Spherisorb SAX Column, 80Å, 5 µm, 4.6 mm X 100 mm, 1/pkg

Part Number: PSS832712

Spherisorb SAX columns contain a silica-based quaternary ammonium bonded sorbent. The column is listed as USP L14 and is used for anion-exchange separations.

PSS832712 - Spherisorb SAX Column, 80Å, 5 µm, 4.6 mm X 100 mm, 1/pkg
Part Number: PSS832712
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 4
Chemistry SAX
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 100 mm
Mode Ion-Exchange
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L14
Units in Package 1/pkg
pH Range 2 - 8