Product Listing:  WAT270927 - 2690 GPV Assembly   to   186004108 - Clear Glass Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 20 mL Volume, 100/pkg

Sorted by Best Sellers
  Product    
info

WAT270927 - 2690 GPV Assembly

Part Number: WAT270927

This spare part is a Waters Quality part

WAT270927 - 2690 GPV Assembly
Part Number: WAT270927
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Valves
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

JJAN27324 - µBondapak C18 Column, 125Å, 10 µm, 3.9 mm X 300 mm, 1/pkg

Part Number: JJAN27324

µBondapak C18 columns are general purpose, silica-based, reversed-phase C18 columns that are based on 10 µm particle technology. As a starting point for preparative chromatography, no other column can provide the balance between resolution, throughput and cost.

JJAN27324 - µBondapak C18 Column, 125Å, 10 µm, 3.9 mm X 300 mm, 1/pkg
Part Number: JJAN27324
Brand: µBondapak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 9.8
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 3.9 mm
Length (mm) 300 mm
Mode Reversed-Phase
Particle Shape Irregular
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 125Å
Silanol Activity High
Surface Area 330
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

700005054 - O-Ring Removal Tool

Part Number: 700005054

Brass O-Ring Removal Tool

700005054 - O-Ring Removal Tool
Part Number: 700005054
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category Mass Spectrometry
Products 3100 Mass Detector
Single Quad Detector
Tandem Quadrupole Detector
SPECVALUE134881948
Xevo G2 Q-Tof Mass Spec
Xevo Q-Tof Mass Spec
Xevo TQ-S MS
Replacement Schedule As Needed

info

700002598 - Seal Wash Housing Seal, 2/pkg

Part Number: 700002598

This spare part is a Waters Quality part

700002598 - Seal Wash Housing Seal, 2/pkg
Part Number: 700002598
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
ACQUITY UPLC I2V Binary Solvent Manager
ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

700002597 - Seal Wash Housing

Part Number: 700002597

This spare part is a Waters Quality part

700002597 - Seal Wash Housing
Part Number: 700002597
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

700004588 - LockSpray Ref Probe Assy

Part Number: 700004588

This spare part is a Waters Quality part

700004588 - LockSpray Ref Probe Assy
Part Number: 700004588
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

WAT062479 - Bottle Caps, 1L, 4/Pkg

Part Number: WAT062479

The one liter Solvent Bottle Cap is a polyethylene cap that prevents free exchange of atmospheric gasses with helium, but will not sustain an internal pressure build-up.The three-holed cap can accomodate a helium inlet line, helium exhaust line, and a solvent inlet line.

WAT062479 - Bottle Caps, 1L, 4/Pkg
Part Number: WAT062479
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Pumps
Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
510 HPLC Pump
515 HPLC Pump
600 MultiSolvent Delivery System
610 PowerLine™ Isocratic Pump
626 LC System

info

700001237 - ZQ/ Quattro Micro Sample Cone

Part Number: 700001237

This spare part is a Waters Quality part

700001237 - ZQ/ Quattro Micro Sample Cone
Part Number: 700001237
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
Quattro micro Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule No
sparepartsystemscategory LCMS

info

186007484 - ACQUITY UPLC M-Class Peptide BEH C18 Column, 130Å, 1.7 µm, 75 µm X 250 mm, 1/pkg

Part Number: 186007484

ACQUITY UPLC M-Class Columns are designed for optimal performance for nano- to micro scale liquid chromatographic separation, offering the highest possible sensitivity, resolution and reproducibility for biomarker discovery and protein identification and characterization. The 300µm ID columns are built utilizing a ultra low dispersion column design and offer the same simplicity of use as more traditional columns. Like all M-Class columns they withstand 15kpsi operating pressure and handle pressure fluctuations during injection extremely well and thus provide superior longevity. In order to achieve maximum performance, it is important to ensure that proper connections are made to minimize peak tailing and poor efficiency. This specific offering contains Waters patented BEH Technology 130A pore, C18, 1.7um particles. Each batch is specifically QC tested using a gradient separation of a tryptic digest of cytochrome c to before being QC accepted as a Peptide separation column.

186007484 - ACQUITY UPLC M-Class Peptide BEH C18 Column, 130Å, 1.7 µm, 75 µm X 250 mm, 1/pkg
Part Number: 186007484
Brand: ACQUITY UPLC M-Class

Products > Chromatography Consumables & Columns > Columns
% Carbon Load 18
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type 10-32 for 1/16" male /360um open
Format Column
ID 75 µm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
QC Tested Peptide
Surface Area 185
System Nano/Micro
Technology BEH
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 10

info

289002576 - nano-Tee , M-M-M detail

Part Number: 289002576

The nano-tee without gauge pin fits into the 10,000psi nanoACQUITY system. This nanoTee is used on the following configurations: 2D with Dilution, Direct Injection, Single Pump, and Vented Dual Pump Trapping. To see the Fluidic Configurations for the nanoACQUITY UPLC, go to the Url Link below, under Systems select nanoACQUITY, click on the Waters Graphical Part Locator, and then choose Fluidic Configurations on the right side of the page. There will be the six different configurations of the nanoACQUITY that you can click on individually to see a larger image. There will also be a parts list for that specific configuration on the right side of the page.

289002576 - nano-Tee , M-M-M detail
Part Number: 289002576
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category nanoACQUITY
Products High Pressure nanoACQUITY UPLC Sample Manager
nanoACQUITY UPLC with 2D Technology
Replacement Schedule As Needed

info

WAS207006 - Assembly, Pump Head (w/check valves)

Part Number: WAS207006

An integral part of the Waters 1515 and 500 series pumps, the Pump Head Assembly is made from the highest quality stainless steel and comes complete with the inlet/outlet check valve and the Clear-100 Plunger Seal already installed. The Pump Head is rigorously tested for supperior performance.

WAS207006 - Assembly, Pump Head (w/check valves)
Part Number: WAS207006
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
Replacement Schedule As Needed

info

WAT036805 - Sep-Pak tC18 Plus Light Cartridge, 145 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT036805

Silica-based bonded phase with strong hydrophobicity; trifunctional bonding chemistry gives it an increased hydrolytic stabilty; applications similar to C18.

WAT036805 - Sep-Pak tC18 Plus Light Cartridge, 145 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT036805
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry TC18
Endcap End Capped
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 145 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

700002634 - 1/4in. Short Comp. Screw (Gold-plated)

Part Number: 700002634

There are 10 Gold-plated compression screws in one package.

700002634 - 1/4in. Short Comp. Screw (Gold-plated)
Part Number: 700002634
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Bio Quaternary Solvent Manager
ACQUITY I-Class BSM
ACQUITY UPLC Binary Solvent Manager
Open Architecture UPLC
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

WAT080733 - Analytical Flow Cell, 10mm

Part Number: WAT080733

The Analytical Flow Cell Assembly for the 486 detector has a 10mm path length and a pressure limit of 1000psi.

WAT080733 - Analytical Flow Cell, 10mm
Part Number: WAT080733
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 486 Tunable UV/Visible Absorbance Detector

info

205015016 - ACQUITY UPLC ID Cell TUV, Analytical

Part Number: 205015016

The ACQUITY UPLC Analytical Flowcell with Intelligent Chip Technology can be used in older detectors but the chip technology feature will not work with those older modules. Newer ACQUITY TUV models with serial number A10TUV001N or A10TUV001A will have the chip technology feature working in the detectors. This is the standard analytical flow cell in the ACQUITY TUV detectors.

205015016 - ACQUITY UPLC ID Cell TUV, Analytical
Part Number: 205015016
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category ACQUITY
Products ACQUITY UPLC TUV Detector
Replacement Schedule As Needed

info

186001265 - Waters PAH C18 Column, 120Å, 5 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: 186001265

Polyaromatic hydrocarbons (PAHs) are among the most frequently monitored environmental contaminants. Standard and official methods for the analysis of PAHs are found in compendia for air, drinking water, wastewater, solid waste, and food analysis. Many of these methods specify HPLC, usually with UV and fluorescence detection, as the recommended analytical procedure. Introducing, from Waters Corporation, world leaders in HPLC and LCMS, the best column for HPLC analysis of PAHs, Waters PAH Column.

186001265 - Waters PAH C18 Column, 120Å, 5 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: 186001265
Brand: Waters PAH

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry C18
Endfitting Type Waters
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 120Å
Units in Package 1/pkg
pH Range 2 - 8

info

186003535 - ACQUITY UPLC HSS T3 Column, 100Å, 1.8 µm, 1 mm X 50 mm, 1/pkg

Part Number: 186003535

The universal, silica-based bonded phase used for the ACQUITY HSS T3 sorbents is compatible with 100% aqueous mobile phase and should be your first choice when developing separations for polar and non-polar compounds. The ACQUITY HSS T3 UPLC columns exhibit ultra-low MS bleed and are fully scalable and transferable to HPLC separations.

186003535 - ACQUITY UPLC HSS T3 Column, 100Å, 1.8 µm, 1 mm X 50 mm, 1/pkg
Part Number: 186003535
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 11
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 1 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.8 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 230
System UPLC/UHPLC
Technology HSS
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

6070283-S1 - TUBE FEP 12 DIA 1M

Part Number: 6070283-S1

This spare part is a Waters Quality part

6070283-S1 - TUBE FEP 12 DIA 1M
Part Number: 6070283-S1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products Tandem Quadrupole Detector
SPECVALUE134881948
SPECVALUE134881949
Replacement Schedule As Needed

info

405008854 - Needle Guide

Part Number: 405008854

ACQUITY Sample Needle Guide

405008854 - Needle Guide
Part Number: 405008854
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Spacers
Product Category ACQUITY
Products ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

PSS832315 - Spherisorb Amino (NH2) Column, 80Å, 3 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: PSS832315

Spherisorb NH2 (Amino) columns contain a silica-based aminopropyl bonded sorbent. The column is listed as USP L8 and is used for anion-exchange, normal-phase and HILIC separations.

PSS832315 - Spherisorb Amino (NH2) Column, 80Å, 3 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: PSS832315
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 1.9
Chemistry Amino (NH2)
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 3 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L8
Units in Package 1/pkg
pH Range 2 - 8

info

PSL404231 - Aluminum, Crimp Cap and PTFE/silicone/PTFE Septum, 100/pkg

Part Number: PSL404231

For more information on the complete line of Waters vials, please download Waters latest brochure on vials and accessories.

PSL404231 - Aluminum, Crimp Cap and PTFE/silicone/PTFE Septum, 100/pkg
Part Number: PSL404231
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Certified Not Certified
Closure Type Crimp
Color Aluminum
Format Cap and PTFE/silicone/PTFE Septum
Units in Package 100/pkg

info

186006518 - BEH200 SEC Protein Standard Mix

Part Number: 186006518

The BEH200 SEC Protein Standard Mix is a 5 component protein mixture (Thyroglobulin, IgG, BSA, Myoglobin, Uracil) used to benchmark ACQUITY UPLC BEH200 SEC, 1.7 µm Columns. It is recommended that this standard be used on a regular basis for benchmarking column and system performance, similar to the QCRM product line.

186006518 - BEH200 SEC Protein Standard Mix
Part Number: 186006518
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Packaging 1/pkg
Product Type Column Performances
Shipping Formulation Solid
Storage Frozen -20 C
System UPLC

info

700000152 - Piston Seal Kit

Part Number: 700000152

Designed specifically for the Reagent Manager, the Piston Seal Kit features an internal spring that provides the correct pressure on the plunger, increasing the life of the piston. Each replacement seal kit contains one piston seal, one backup washer, one seal wash diaphragm, one seal insertion/removal tool, and a scouring pad to clean the piston when changing the seal.

700000152 - Piston Seal Kit
Part Number: 700000152
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Products Reagent Manager
Replacement Schedule Annually

info

EEE000142 - Shodex IC SI-90 4E (PEEK)

Part Number: EEE000142

Waters is the leader of the European distributors for Shodex products from Showa Denko K.K.. The Shodex products represent a complete range of polymeric columns for various applications such as ions, sugar, organic acids, affinity, proteins and peptides as well as pesticides, herbicides etc. Aqueous and organic gel filtration columns as well as GPC standards are also available. Please use the product finder to search for your appropriate application. For more detailed product information and applications, see www.sdk.co.jp/shodex/

EEE000142 - Shodex IC SI-90 4E (PEEK)
Part Number: EEE000142
Brand: Shodex
Shodex

Products > Chromatography Consumables & Columns > GPC & SEC Columns > GPC & SEC Columns
Endfitting Type Shodex
Format Column
ID 4 mm
Length (mm) 250 mm
Particle Substrate Polymer
Units in Package 1/pkg

info

WAT271066 - Plunger Seals Replacement Kit (Black) 2/Pkg

Part Number: WAT271066

These optional (black) plunger seals for Waters® Alliance Solvent Management Systems are good alternatives if the standard seal (P/N WAT270938) does not perform well for your specific application.

WAT271066 - Plunger Seals Replacement Kit (Black) 2/Pkg
Part Number: WAT271066
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Replacement Schedule Annually

info

WAT085466 - PIC Reagent D4

Part Number: WAT085466

Paired -Ion Chromatography (PIC® Reagents) provide an easy solution for analyzing samples containing ionic species. These reagents allow ionic compounds to be separated by reverse-phase chromatography, saving time by allowing simultaneous assay of acids, bases, amphoteric and neutral compounds. PIC D4 is a 5 vial/pkg of dibutylammonium phosphate in a workable UV range in mobile phase 215+ nm.

WAT085466 - PIC Reagent D4
Part Number: WAT085466
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Detector UV
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System HPLC -UV

info

6416004-S1 - Tube, PTFE, 1.6 x 0.12 x 1m

Part Number: 6416004-S1

This spare part is part of the NanoLockspray Option.

6416004-S1 - Tube, PTFE, 1.6 x 0.12 x 1m
Part Number: 6416004-S1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products Q-Tof Premier Mass Spectrometer
SYNAPT™ MS
Synapt High Definition MS System™
Replacement Schedule As Needed

info

186002051 - Oasis MCX 2.1 X 20 mm Online Cartridge Column, 30 µm Particle Size, 1/pk

Part Number: 186002051

The Oasis MCX on-line cartridge column is designed for rugged, reproducible, and ultra-fast on-line SPE. This cartridge column contains the Oasis MCX sorbent, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. This on-line cartridge column is designed to be used with the appropriate Waters narrow-bore analytical column, such as XSelect, XBridge, SunFire, Atlantis, XTerra, or Symmetry column. The Oasis MCX on-line cartridge column fits into a Sentry holder that features a finger-tight fitting for fast, convenient replacement.

186002051 - Oasis MCX 2.1 X 20 mm Online Cartridge Column, 30 µm Particle Size, 1/pk
Part Number: 186002051
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry MCX
Format/Type Online Cartridge Column
Ion Exch. Capacity 1 meq/gram
Length 20 mm
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Units In Package 1/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

WAT036945 - Sep-Pak C18 3 cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT036945

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT036945 - Sep-Pak C18 3 cc Vac RC Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT036945
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry C18
Endcap End Capped
Format/Type Vac RC Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186004108 - Clear Glass Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 20 mL Volume, 100/pkg

Part Number: 186004108

These vials are produced to tight dimensional tolerance for use in autosamplers.

186004108 - Clear Glass Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 20 mL Volume, 100/pkg
Part Number: 186004108
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Closure Type Screw Neck
Format Vial
GlassType Clear Glass
Septa Type Cap and Preslit PTFE/Silicone Septa
Units in Package 100/pkg
Volume Capacity 20 mL