Product Listing:  205000343 - ACQUITY UPLC Col. In-Line Filter Kit   to   700002676 - Backpressure Regulator, 250psi

Sorted by Best Sellers
  Product    
info

205000343 - ACQUITY UPLC Col. In-Line Filter Kit

Part Number: 205000343

Waters recommends you filter buffers and samples using a 0.2µm filter prior to using ACQUITY UPLC™ BEH columns. Filtration protects the columns and instrument components from a build-up of particulate matter, improving column lifetime and minimizing system downtime. The ACQUITY UPLC™ column In-line filter kit comes complete with the holder and five 0.2µm stainless steel replacement filters. You can order a a package of five replacement filters using Part Number 700002775 which will work with the in-line filter kit.

205000343 - ACQUITY UPLC Col. In-Line Filter Kit
Part Number: 205000343
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY UPLC High Temperature Column Heater
ACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

201000281 - ACQUITY PDA/TUV 2489/2998 PERFORMANCE MAINTENANCE KIT

Part Number: 201000281

The Waters® Performance Maintenance Kit for the ACQUITY UPLC TUV/PDA contains all of the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. It is used in ACQUITY UPLC PDA Detectors, ACQUITY eLambda PDA Detector, ACQUITY UPLC TUV Detectors, 2489 Dual Wavelength UV Detector and the 2998 PDA Detector. The old part number was 201000186. The Waters® Performance Maintenance Kit includes the following parts: PerformancePLUS™ Long Life Lamp which is warranted for a lifetime of 2000 hours or 1 year, whichever comes first.

201000281 - ACQUITY PDA/TUV 2489/2998 PERFORMANCE MAINTENANCE KIT
Part Number: 201000281
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Detectors
Products 2489 UV/Visible Detector
2998 Photodiode Array Detector
ACQUITY UPLC PDA Detector
ACQUITY UPLC TUV Detector
ACQUITY UPLC eLAmbda PDA Detector
Replacement Schedule Annually

info 186008714 - PEEK One Piece Fingertight Fitting
Part Number: 186008714
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAS081140 - Analytical Flow Cell

Part Number: WAS081140

The Waters®TaperSlit™ Flow Cell design used in the 2487/2489 detectors renders the detector baseline insensitive to change in mobile phase refractive index. Refractive index changes occur during gradient separations or result from temperature or pump-induced pressure fluctuations.The TaperSlit™ flow cell has a taper to the internal bore of the flow cell. In the Waters® Analytical TaperSlit™ FlowCell, the combination of the lens and TaperSlit bore geometry prevents light from hitting the cell walls. The analytical cell has a 10mm path length and a cell volume of 10µL.

WAS081140 - Analytical Flow Cell
Part Number: WAS081140
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Flow Cells
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector

info

PSS830915 - Spherisorb Cyano (CN) Column, Normal Phase, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: PSS830915

The Spherisorb CN chemistry is general purpose normal phase propyl cyano bonded ligand to a silica substrate. This column is conditioned and shipped with normal phase solvent.

PSS830915 - Spherisorb Cyano (CN) Column, Normal Phase, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: PSS830915
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 3.1
Chemistry Cyano (CN)
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Normal-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Surface Area 220
System HPLC
USP Classification L10
Units in Package 1/pkg
pH Range 2 - 8

info

WAT052874 - AccQ-Tag Method Manual

Part Number: WAT052874

Manual detailing Waters AccQ-Tag™ Precolumn derivatization method for amino acid analysis.

WAT052874 - AccQ-Tag Method Manual
Part Number: WAT052874
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

700011047 - Vial Holder, 48-well, 2mL vial

Part Number: 700011047

The original part number was 405003743 and it was changed to part number 700011047.

700011047 - Vial Holder, 48-well, 2mL vial
Part Number: 700011047
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category ACQUITY
nanoACQUITY
Products ACQUITY H-Class Bio Sample Manager-Flow Through Needle
ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
ACQUITY UPLC Sample Manager
ACQUITY UPLC Sample Organizer
nanoACQUITY UPLC Sample Manager
Replacement Schedule As Needed

info

700004206 - Capillary Tube

Part Number: 700004206

This spare part is a Waters Quality part

700004206 - Capillary Tube
Part Number: 700004206
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
Xevo Q-Tof Mass Spec
Xevo™ TQ MS
Replacement Schedule As Needed

info

PSS830615 - Spherisorb ODS1 Column, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg

Part Number: PSS830615

Spherisorb ODS1 columns are general purpose, silica-based, reversed-phase C18 columns. The ODS1 packing features low ligand density with a specified carbon load of ?6.2%.

PSS830615 - Spherisorb ODS1 Column, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pkg
Part Number: PSS830615
Brand: Spherisorb

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 6.2
Bonding Technology ODS1
Chemistry C18
Endcapped No
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 80Å
Silanol Activity High
Surface Area 220
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

700001218 - PerformancePLUS Vacuum Chamber

Part Number: 700001218

The PerformancePLUS Vacuum Chamber is a low volume (500µL internal volume) chamber used on the 2790/2795, 2690/2695 Separations Modules, and the stand-alone Vacuum Degasser. It uses a Teflon AF Membrane which allows for a lower internal volume and equivalent degassing efficiency, resulting in easier system priming and faster solvent changeover.

700001218 - PerformancePLUS Vacuum Chamber
Part Number: 700001218
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Systems Components
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
2796 Bioseparations Module
In-Line Degasser

info

186007378 - CORTECS C18 Column, 90Å, 2.7 µm, 4.6 mm X 150 mm, 1/pkg

Part Number: 186007378

CORTECS C18 Columns are general purpose, high-efficiency columns based on a solid-core particle that offer balanced retention of acids, bases and neutrals at low and mid-range pH.

186007378 - CORTECS C18 Column, 90Å, 2.7 µm, 4.6 mm X 150 mm, 1/pkg
Part Number: 186007378
Brand: CORTECS

Products > Chromatography Consumables & Columns
% Carbon Load 6.6
Chemistry C18
Endcapped Yes
Endfitting Type Parker-style
Format Column
ID 4.6 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 2.7 µm
Particle Substrate Solid-Core
Pore Size 90Å
Silanol Activity Low
Surface Area 100
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186008057 - Oasis PRiME HLB 6 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 30/pk

Part Number: 186008057

Oasis PRiME HLB sets the new performance standard for solid phase extraction cleanup in routine analysis. This sorbent will provide reversed-phase cleanup of acidic, basic and neutral compounds form complex sample matrices. Oasis PRiME HLB has been designed to simplify SPE with easy to follow protocols. It also produces cleaner samples by removing greater than 95% of common matrix interferences such as salts, proteins and phospholipids. Additionally, viscous samples can be processed with faster flows through the device and and less plugging. Based on the Oasis HLB sorbent technology, this water-wettable sorbent does not require conditioning and equilibration to provide excellent recoveries.

186008057 - Oasis PRiME HLB 6 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 30/pk
Part Number: 186008057
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry PRiME HLB
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Sorbent Weight 200 mg
Units In Package 30/pkg
Water Wettable Water Wettable

info

405000562 - Waters 48-position Vial Holder

Part Number: 405000562

The Waters® 48-position Rectangular Vial-Holder Plate can accomodate either 2mL autosampler vials or 0.65mL microcentrifuge tubes (Eppendorf® style) for use on the 2790/2795 Separations Module. There are two types of 48-position plates: 6 rows x 8 columns and 8 rows by 6 columns.

405000562 - Waters 48-position Vial Holder
Part Number: 405000562
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule No

info

667003974 - Empower 3 Personal System Suitability

Part Number: 667003974

Calculates all System Suitability parameters described in the different Pharmacopoeia USP, EP and JP. Performs statistical calculations on results as repeatability and summarizes the information in graphical or tabular formats. Allows you to specify the control limits or warning limits to flag out of specifications (OOS) values. Develop custom reports with trend plots and statistics, summary graphics to highloght OOS values.

667003974 - Empower 3 Personal System Suitability
Part Number: 667003974
Products > Chromatography Consumables & Columns > Accessories
Product Compatibility Empower 3 all versions
Quantity 1

info

WAT270941 - Check Valve Cartridge Replacement Kit 2/Pkg

Part Number: WAT270941

Integral to the 2690/2695 and 2790/2795 Separations Modules, these cartridges are critical to the overall performance of the Alliance® system, and ensure long life, low internal volume, and quick response to flow changes.

WAT270941 - Check Valve Cartridge Replacement Kit 2/Pkg
Part Number: WAT270941
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems
Replacement Schedule As Needed

info

WAT052586 - PDA DETECTOR PERFORMANCE MAINTENANCE KIT

Part Number: WAT052586

The Waters® Performance Maintenance Kit for the 996/2996/ACQUITY 2996 PDA Detector contains all of the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts:a PerformancePLUS™ Long Life Lamp which is warranted for a lifetime of 2000 hours or 1 year, whichever comes first, and an air filter.

WAT052586 - PDA DETECTOR PERFORMANCE MAINTENANCE KIT
Part Number: WAT052586
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category ACQUITY
Capillary LC
Detectors
Products 2996 Photodiode Array Detector
996 Photodiode Array Detector
ACQUITY UPLC 2996 PDA Detector
CapLC 2996
Replacement Schedule Annually

info

WAS207006 - Assembly, Pump Head (w/check valves)

Part Number: WAS207006

An integral part of the Waters 1515 and 500 series pumps, the Pump Head Assembly is made from the highest quality stainless steel and comes complete with the inlet/outlet check valve and the Clear-100 Plunger Seal already installed. The Pump Head is rigorously tested for supperior performance.

WAS207006 - Assembly, Pump Head (w/check valves)
Part Number: WAS207006
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Pumps
Products 1515 HPLC Pump
1525 HPLC Pump
515 HPLC Pump
Replacement Schedule As Needed

info

186006938 - ACQUITY UPLC Peptide CSH C18 Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: 186006938

Waters ACQUITY UPLC CSH130 C18 1.7 µm particles contain a low and carefully-defined concentration of positive charges that yield comparatively excellent peak shape for peptides using either FA- or TFA-containing mobile phases. The fact that the performance of a CSH130 C18 column exhibits little dependence on strong ion pairing agents makes it ideal for LC or LC-MS applications.

186006938 - ACQUITY UPLC Peptide CSH C18 Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: 186006938
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 15
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 130Å
QC Tested Peptide
Silanol Activity Low
Surface Area 185
System UPLC/UHPLC
Technology CSH
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 11

info

700002761 - Check Valve Cartridge, 2/pkg

Part Number: 700002761

This inlet check valve cartridge has both a ceramic ball and seat. This change will help alleviate sticking issues that sometimes occur and it has a low internal volume.

700002761 - Check Valve Cartridge, 2/pkg
Part Number: 700002761
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category Separations Module
Products 2695 Separations Module
2695D Dissolution Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

186008056 - Oasis PRiME HLB 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 100/pk

Part Number: 186008056

Oasis PRiME HLB sets the new performance standard for solid phase extraction cleanup in routine analysis. This sorbent will provide reversed-phase cleanup of acidic, basic and neutral compounds form complex sample matrices. Oasis PRiME HLB has been designed to simplify SPE with easy to follow protocols. It also produces cleaner samples by removing greater than 95% of common matrix interferences such as salts, proteins and phospholipids. Additionally, viscous samples can be processed with faster flows through the device and and less plugging. Based on the Oasis HLB sorbent technology, this water-wettable sorbent does not require conditioning and equilibration to provide excellent recoveries.

186008056 - Oasis PRiME HLB 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 100/pk
Part Number: 186008056
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry PRiME HLB
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Sorbent Weight 60 mg
Units In Package 100/pkg
Water Wettable Water Wettable

info

430002012 - ASSY, EXTENSION LOOP, 50uL

Part Number: 430002012

This is a 50µL Sample loop used on the ACQUITY H-Class Sample Manager-FTN and the ACQUITY I-Class Sample Manager-FTN modules.

430002012 - ASSY, EXTENSION LOOP, 50uL
Part Number: 430002012
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category ACQUITY
Products ACQUITY APC SM-pFTN
ACQUITY H-Class Sample Manager-Flow Through Needle
ACQUITY I-Class SM-FTN
Replacement Schedule As Needed

info

WAT270938 - Plunger Seals Replacement Kit (Std-Yellow) 2/Pkg

Part Number: WAT270938

Designed specifically for Waters® Alliance Solvent Management Systems, these standard plunger seals are made from a Waters proprietary material and are the best choice for most applications.

WAT270938 - Plunger Seals Replacement Kit (Std-Yellow) 2/Pkg
Part Number: WAT270938
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems
Replacement Schedule Annually

info

WAT023635 - Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT023635

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT023635 - Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT023635
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry C18
Endcap End Capped
Format/Type Plus Long Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 820 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026973

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026973
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.009 in. (0.23 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

700003530 - Solvent Filter, Titanium, 7/pkg

Part Number: 700003530

The Titanium Solvent Bottle Filters are optional for use where mobile phases contain acids.

700003530 - Solvent Filter, Titanium, 7/pkg
Part Number: 700003530
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Product Category ACQUITY
Products ACQUITY I-Class BSM
ACQUITY UPLC Binary Solvent Manager
Replacement Schedule As Needed

info

430001923 - Tubing, HPLC Stainless Steel Inlet

Part Number: 430001923

HPLC Stainless Steel Inlet Tubing, .005ID x 24 long for ACQUITY 30cm Collumn Heater/Cooler

430001923 - Tubing, HPLC Stainless Steel Inlet
Part Number: 430001923
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY UPLC 30cm Column Heater
Replacement Schedule As Needed

info

186003685 - ACQUITY UPLC Peptide BEH C18 Column, 300Å, 1.7 µm, 2.1 mm X 50 mm, 1/pkg

Part Number: 186003685

The ACQUITY BEH300 C18 Peptide Separation Technology (PST) columns have been specially optimized and QC tested for peptide separations. The wide-pore (300Å) trifunctionally bonded BEH particle offers the widest usable pH range, superior low pH stability, and ultra-low column bleed to assay samples for proteomics, protein characterization, and peptide synthesis.

186003685 - ACQUITY UPLC Peptide BEH C18 Column, 300Å, 1.7 µm, 2.1 mm X 50 mm, 1/pkg
Part Number: 186003685
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 300Å
QC Tested Peptide
Silanol Activity Low
System UPLC/UHPLC
Technology BEH
USP Classification L1
Units in Package 1/pkg
pH Range 1 - 12

info

700005164 - Check Valve, Double Ball & Seat

Part Number: 700005164

ACQUITY H-Class QSM Double Ball & Seat Check Valve

700005164 - Check Valve, Double Ball & Seat
Part Number: 700005164
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Check Valves
Product Category ACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
Replacement Schedule As Needed

info

WAT027059 - Porapak Q 50-80 mesh, 26 grams

Part Number: WAT027059

Porapak GC column packing materials simplify the analysis of a wide variety of complex compounds from atmospheric gases to organics.

WAT027059 - Porapak Q 50-80 mesh, 26 grams
Part Number: WAT027059
Products > Chromatography Consumables & Columns > Accessories > Gas Chromatography Packings
Category All Gas Packings

info

700002676 - Backpressure Regulator, 250psi

Part Number: 700002676

Backpressure Regulator, 250psi, placed after detector if no MS

700002676 - Backpressure Regulator, 250psi
Part Number: 700002676
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Products ACQUITY UPLC PDA Detector
ACQUITY UPLC Fluorescence Detector
ACQUITY UPLC TUV Detector
ACQUITY UPLC eLAmbda PDA Detector
Replacement Schedule As Needed