Product Listing:  186001839 - Symmetry Shield RP18 Prep Column, 100Å, 7 µm, 19 mm X 150 mm, 1/pkg   to   700000288 - Hexapole Assy

Sorted by Popularity
  Product    
info

186001839 - Symmetry Shield RP18 Prep Column, 100Å, 7 µm, 19 mm X 150 mm, 1/pkg

Part Number: 186001839

These reversed-phase columns contain Waters patented embedded polar group technology that “shields” the silica’ residual silanol surface from highly basic analytes. The reduced silanol activity for the SymmetryShield RP18 column significantly improves peak shape and resolution.

186001839 - Symmetry Shield RP18 Prep Column, 100Å, 7 µm, 19 mm X 150 mm, 1/pkg
Part Number: 186001839
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 17
Bonding Technology Shield RP18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Prep Column
ID 19 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 7 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186001844 - Symmetry Shield RP 8 Prep Column, 100Å, 5 µm, 19 mm X 150 mm, 1/pkg

Part Number: 186001844

These reversed-phase columns contain Waters patented embedded polar group technology that “shields” the silica’ residual silanol surface from highly basic analytes. The reduced silanol activity for the SymmetryShield RP8 column significantly improves peak shape and resolution.

186001844 - Symmetry Shield RP 8 Prep Column, 100Å, 5 µm, 19 mm X 150 mm, 1/pkg
Part Number: 186001844
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 17
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format Prep Column
ID 19 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186001845 - Symmetry Shield RP 8 Prep Column, 100Å, 7 µm, 19 mm X 150 mm, 1/pkg

Part Number: 186001845

These reversed-phase columns contain Waters patented embedded polar group technology that “shields” the silica’ residual silanol surface from highly basic analytes. The reduced silanol activity for the SymmetryShield RP8 column significantly improves peak shape and resolution.

186001845 - Symmetry Shield RP 8 Prep Column, 100Å, 7 µm, 19 mm X 150 mm, 1/pkg
Part Number: 186001845
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 17
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format Prep Column
ID 19 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 7 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 335
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

201000215 - QUATTRO PREMIER/XE (SCROLL) PERFORMANCE MAINTENANCE KIT

Part Number: 201000215

The Waters® Performance Maintenance Kit for the Quattro Premier/XE (scroll) Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit for the Quattro Premier/XE (scroll) Mass Spectrometer includes the following parts: Source components, ESI probe components and vacuum pump components. The original part number was 201000180. This particular part number does not deliver a chemical kit which is required to complete the performance testing. The part number for a Waters® Performance Maintenance Kit and a chemical kit is 176002054.

201000215 - QUATTRO PREMIER/XE (SCROLL) PERFORMANCE MAINTENANCE KIT
Part Number: 201000215
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Replacement Schedule Annually

info

186002669 - SunFire C18 OBD Prep Column, 100Å, 10 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186002669

SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

186002669 - SunFire C18 OBD Prep Column, 100Å, 10 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186002669
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 16
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 340
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186002764 - SunFire C8 OBD Prep Column, 100Å, 10 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186002764

SunFire C8 columns are used for general purpose method development at low pH. The C8 ligand is preferred for some assays because it is less hydrophobic and therefore less retentive compared to SunFire C18.

186002764 - SunFire C8 OBD Prep Column, 100Å, 10 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186002764
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 12
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 340
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 8

info

186004027 - SunFire C18 OBD Prep Column, 100Å, 5 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186004027

SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.

186004027 - SunFire C18 OBD Prep Column, 100Å, 5 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186004027
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 16
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 340
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186004028 - SunFire C8 OBD Prep Column, 100Å, 5 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186004028

SunFire C8 columns are used for general purpose method development at low pH. The C8 ligand is preferred for some assays because it is less hydrophobic and therefore less retentive compared to SunFire C18.

186004028 - SunFire C8 OBD Prep Column, 100Å, 5 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186004028
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 12
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Low
Surface Area 340
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186004029 - SunFire Silica OBD Prep Column, 100Å, 5 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186004029

SunFire Prep OBD Silica columns are preparative columns used under normal phase conditions. The Optimum Bed Density (OBD) hardware format ensures superior column lifetime under a wide variety of operating conditions.

186004029 - SunFire Silica OBD Prep Column, 100Å, 5 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186004029
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Silica
Endcapped No
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Normal-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity High
Surface Area 340
System HPLC
USP Classification L3
Units in Package 1/pkg
pH Range 2 - 8

info

186001850 - Symmetry C18 Prep Column, 300Å, 5 µm, 19 mm X 150 mm, 1/pkg

Part Number: 186001850

Symmetry columns continues to set the standard for HPLC drug assays, giving you confidence in the long-term compliance of your HPLC methods. No need to compromise on peak shape, selectivity, column-to-column and batch-to-batch reproducibility, or other critical performance characteristics. Available in a variety of particle sizes, chemistries and dimensions.

186001850 - Symmetry C18 Prep Column, 300Å, 5 µm, 19 mm X 150 mm, 1/pkg
Part Number: 186001850
Brand: Symmetry

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Symmetry300 Columns
% Carbon Load 17
Application Peptide
Chemistry C18
Endcapped Yes
Format Prep Column
ID 19 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 300Å
Silanol Activity Low
Surface Area 110
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

176002059 - XEVO TQ (SCROLL) PERFORMAMCE MAINTENANCE KIT WITH CHEMICAL KIT

Part Number: 176002059

The Waters® Performance Maintenance Kit for the XEVO TQ (scroll) Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source components, ESI probe components and vacuum pump components. The original part number was 201000202 and it has been changed to part number 176002059. This particular part number also delivers a chemical kit which is required to complete the performance testing.

176002059 - XEVO TQ (SCROLL) PERFORMAMCE MAINTENANCE KIT WITH CHEMICAL KIT
Part Number: 176002059
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Replacement Schedule Annually

info

M946438CC1 - Source T-Wave

Part Number: M946438CC1

This spare part is a Waters Quality part

M946438CC1 - Source T-Wave
Part Number: M946438CC1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Electrical
Replacement Schedule As Needed

info

201000232 - LCT MK II PERFORMANCE MAINTENANCE KIT

Part Number: 201000232

The Waters® Performance Maintenance Kit for the LCT MKII Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source component, ESI probe components and vacuum pump components. The original part number was 201000166. This particular part number does not deliver a chemical kit which is required to complete the performance testing. The part number for a Waters® Performance Maintenance Kit and a chemical kit is 176002063.

201000232 - LCT MK II PERFORMANCE MAINTENANCE KIT
Part Number: 201000232
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products LCT Mass Spectrometer
Replacement Schedule Annually

info

700001198 - ZQ/ Quattro Micro Ion Block Assembly

Part Number: 700001198

Ion Block Assembly containing the sample cone, cone gas cone, extraction lens and o-ring.

700001198 - ZQ/ Quattro Micro Ion Block Assembly
Part Number: 700001198
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
Quattro micro Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule No
sparepartsystemscategory LCMS

info

201000229 - SYNAPT G2 LS PERFORMANCE MAINTENANCE KIT

Part Number: 201000229

The Waters® Performance Maintenance Kit for the Synapt G2 Mass Spectrometer with Lockspray Source option contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source component, ESI probe components, and vacuum pump components.

201000229 - SYNAPT G2 LS PERFORMANCE MAINTENANCE KIT
Part Number: 201000229
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products SYNAPT G2 HDMS System
SYNAPT G2 MS System
Replacement Schedule Annually

info

700000432 - 3 Column Select Valve

Part Number: 700000432

The 3-Column Selection Valve is an 8-port, 3-position valve that allows selection among 3 column positions. The tubing for the 3-column selection valve is installed at the factory. The 3-column selection valve can switch between columns, bypass to the detector using a small restrictor, or bypass to waste.

700000432 - 3 Column Select Valve
Part Number: 700000432
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Pumps
Separations Module
Products 2790 Separations Module
2795 Separations Module
System Fluidics Organizer
Replacement Schedule No

info

201000221 - LCT PERFORMANCE MAINTENANCE KIT

Part Number: 201000221

The Waters® Performance Maintenance Kit for the LCT Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source component, ESI probe components and vacuum pump components. The original part number was 201000166. This particular part number does not deliver a chemical kit which is required to complete the performance testing. The part number for a Waters® Performance Maintenance Kit and a chemical kit is 176002062.

201000221 - LCT PERFORMANCE MAINTENANCE KIT
Part Number: 201000221
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products LCT Mass Spectrometer
Replacement Schedule Annually

info

186001940 - XTerra Shield RP18 OBD Prep Column, 125Å, 5 µm, 30 mm X 50 mm, 1/pkg

Part Number: 186001940

XTerra Preparative RP18 columns are hybrid-based, reversed-phase C18 columns that incorporate Waters patented embedded polar group technology to improve peak shape performance for highly basic compounds. These first generation columns provide superior pH stability compared to a silica-based column.

186001940 - XTerra Shield RP18 OBD Prep Column, 125Å, 5 µm, 30 mm X 50 mm, 1/pkg
Part Number: 186001940
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 15
Bonding Technology Shield RP18
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format OBD Prep Column
ID 30 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 12

info

186001941 - XTerra RP 8 OBD Prep Column, 125Å, 5 µm, 30 mm X 50 mm, 1/pkg

Part Number: 186001941

XTerra Preparative RP8 columns are hybrid-based, reversed-phase C8 columns that incorporate Waters patented embedded polar group technology to improve peak shape performance for highly basic compounds. These first generation columns provide superior pH stability compared to a silica-based column.

186001941 - XTerra RP 8 OBD Prep Column, 125Å, 5 µm, 30 mm X 50 mm, 1/pkg
Part Number: 186001941
Brand: XTerra

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 13.5
Bonding Technology RP 8
Chemistry C8
Endcapped Yes
Endfitting Type Waters
Format OBD Prep Column
ID 30 mm
Length (mm) 50 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 125Å
Silanol Activity Low
Surface Area 175
System HPLC
USP Classification L7
Units in Package 1/pkg
pH Range 2 - 12

info

415000411 - Stack for 6 Deepwell Plates

Part Number: 415000411

This is the PAL System Stack for 6 Deepwell plates or 6 PAL standard 2mL trays.

415000411 - Stack for 6 Deepwell Plates
Part Number: 415000411
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Injectors
Products 2777 Compact Sample Manager
2777 Sample Manager
Replacement Schedule As Needed

info

176003361 - Low pH MS Methods Kit

Part Number: 176003361

This kit contains a suit of columns that have been chosen for method development using MS detection. All the columns in this kit exhibit low MS bleed for maximum sensitivity. The 4.5mm x 100mm, 3.5 µm columns included in this kit are XBridge BEH C18, Bridge BEH Phenyl, XSelect HSS C18, XSelect HSS Cyano, and XSelect HSS T3.

176003361 - Low pH MS Methods Kit
Part Number: 176003361
Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Format Method Development Kit
ID 4.6 mm
Length (mm) 100 mm
Particle Size (dp) 3.5 µm

info

176002053 - QUATTRO PREMIER/XE (ROTARY) PERFORMANCE MAINTENANCE KIT WITH CHEMICAL KIT

Part Number: 176002053

The Waters® Performance Maintenance Kit for the Quattro Premier/XE (rotary) Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source components, ESI probe components and vacuum pump components. The original part number was 201000167 and it has been changed to part number 176002053. This particular part number also delivers a chemical kit which is required to complete the performance testing..

176002053 - QUATTRO PREMIER/XE (ROTARY) PERFORMANCE MAINTENANCE KIT WITH CHEMICAL KIT
Part Number: 176002053
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Replacement Schedule Annually

info

201000219 - QToF-I/II/API-US/Micro PERFORMANCE MAINTENANCE KIT

Part Number: 201000219

The Waters® Performance Maintenance Kit for the Q-Tof I, Q-Tof II, Q-Tof API-US, and the Q-Tof micro Mass Spectrometers contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source components, ESI probe components and vacuum pump components. The original part number was 201000139. This particular part number does not deliver a chemical kit which is required to complete the performance testing. Performance Maintenance Kit with Chemical Kit part number is 176002075.

201000219 - QToF-I/II/API-US/Micro PERFORMANCE MAINTENANCE KIT
Part Number: 201000219
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products Q-Tof II Mass Spectrometer
Q-Tof 1 Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof micro Mass Spectrometer
Replacement Schedule Annually

info

176002052 - ZMD MKII PERFORMANCE MAINTENANCE KIT WITH CHEMICAL KIT

Part Number: 176002052

The Waters® Performance Maintenance Kit for the ZMD MKII contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: oil mist filter element, Rheodyne needle port, ESI Probe Kit, powder-free gloves, inner API source kit, outer API source kit, sample cone, heater cartridge and lapping film. The old part number was 201000109 has now been changed to 176002052. This particular part number also delivers a chemical kit which is required to complete the performance testing.

176002052 - ZMD MKII PERFORMANCE MAINTENANCE KIT WITH CHEMICAL KIT
Part Number: 176002052
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products ZMD Mass Spectrometer
Replacement Schedule Annually

info

186004726 - XBridge BEH HILIC OBD Prep Column, 130Å, 5 µm, 19 mm X 150 mm, 1/pkg

Part Number: 186004726

XBridge BEH HILIC columns contain unbonded BEH substrate and are designed to retain and separate very polar compounds. These unique columns are optimized and tested to produce efficient, reproducible separations under HPLC HILIC conditions. More rugged than silica based HILIC phases, the BEH particle’s chemical stability results in long column lifetimes.

186004726 - XBridge BEH HILIC OBD Prep Column, 130Å, 5 µm, 19 mm X 150 mm, 1/pkg
Part Number: 186004726
Brand: XBridge

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry HILIC
Endcapped No
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 150 mm
Mode Hydrophilic Interaction (HILIC)
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Hybrid
Pore Size 130Å
Silanol Activity Medium
Surface Area 185
System HPLC
Technology BEH
USP Classification L3
Units in Package 1/pkg
pH Range 1 - 9

info

186004026 - Atlantis T3 OBD Prep Column, 100Å, 5 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186004026

Atlantis T3 columns are universal, silica-based, reversed-phase C18 columns that provide balanced retention of polar and hydrophobic molecules and should be your first choice when developing separations of polar and non-polar compounds.

186004026 - Atlantis T3 OBD Prep Column, 100Å, 5 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186004026
Brand: Atlantis

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 14
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 330
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

186003447 - SunFire Silica OBD Prep Column, 100Å, 10 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186003447

SunFire Prep OBD Silica columns are preparative columns used under normal phase conditions. The Optimum Bed Density (OBD) hardware format ensures superior column lifetime under a wide variety of operating conditions.

186003447 - SunFire Silica OBD Prep Column, 100Å, 10 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186003447
Brand: SunFire

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Silica
Endcapped No
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Normal-Phase
Particle Shape Spherical
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity High
Surface Area 340
System HPLC
USP Classification L3
Units in Package 1/pkg
pH Range 2 - 8

info

186003709 - Atlantis T3 OBD Prep Column, 100Å, 10 µm, 19 mm X 250 mm, 1/pkg

Part Number: 186003709

Atlantis T3 columns are universal, silica-based, reversed-phase C18 columns that provide balanced retention of polar and hydrophobic molecules and should be your first choice when developing separations of polar and non-polar compounds.

186003709 - Atlantis T3 OBD Prep Column, 100Å, 10 µm, 19 mm X 250 mm, 1/pkg
Part Number: 186003709
Brand: Atlantis

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 14
Bonding Technology T3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format OBD Prep Column
ID 19 mm
Length (mm) 250 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 100Å
Silanol Activity Medium
Surface Area 330
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

201000224 - QTOF ULTIMA PERFORMANCE MAINTENANCE KIT

Part Number: 201000224

The Waters® Performance Maintenance Kit for the Q-Tof Ultima Mass Spectrometer contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: Source component, ESI probe components and vacuum pump components. This particular part number does not deliver a chemical kit which is required to complete the performance testing. Performance Maintenance Kit with Chemical Kit part number is 176002076.

201000224 - QTOF ULTIMA PERFORMANCE MAINTENANCE KIT
Part Number: 201000224
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Mass Spectrometry
Products Q-Tof Ultima API Mass Spectrometer
Replacement Schedule Annually

info

700000288 - Hexapole Assy

Part Number: 700000288

This spare part is a Waters Quality part

700000288 - Hexapole Assy
Part Number: 700000288
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products Q-Tof 1 Mass Spectrometer
ZMD Mass Spectrometer