Product Listing:  700001916 - Sample Loop, SS, 10µL   to   430001210 - ASSY, TUBE, VENT VALVE P4 TO WASTE

Sorted by Popularity
  Product    
info

700001916 - Sample Loop, SS, 10µL

Part Number: 700001916

This spare part is a Waters Quality part

700001916 - Sample Loop, SS, 10µL
Part Number: 700001916
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category Capillary LC
Products CapLC System
CapLC XE System
Replacement Schedule As Needed

info

700001986 - 2mL Holding Loop

Part Number: 700001986

This spare part is a Waters Quality part

700001986 - 2mL Holding Loop
Part Number: 700001986
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Holding Loop
Product Category Injectors
Products 2767/2747 Sample Manager
Replacement Schedule As Needed

info

700002843 - Union, Capillary

Part Number: 700002843

This spare part is part of the NanoLockspray Option.

700002843 - Union, Capillary
Part Number: 700002843
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products Q-Tof Premier Mass Spectrometer
SYNAPT G2 HDMS System
SYNAPT G2 MS System
SYNAPT™ MS
Synapt High Definition MS System™
Xevo Q-Tof Mass Spec
Replacement Schedule As Needed

info

700003211 - Mounting Rail, Analytical Column

Part Number: 700003211

This spare part is a Waters Quality part

700003211 - Mounting Rail, Analytical Column
Part Number: 700003211
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Pumps
Products System Fluidics Organizer
Replacement Schedule As Needed

info

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026973

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026973
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.009 in. (0.23 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

186007033 - GlycoWorks Control Standard

Part Number: 186007033

The GlycoWorks Control Standard is an undigested, unlabeled, Human IgG standard that is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. When purchasing the 176 kit part numbers this standard is included but can also be purchased separately. Each vial contains 100 µg lyophilized material (solid). (It’s digested and labeled compliment is the Glycan Performance Test standard PN 186006349 (2-AB)). Each vial contains 100 µg lyophilized material (solid).

186007033 - GlycoWorks Control Standard
Part Number: 186007033
Brand: GlycoWorks

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Life Science
Column Chemistry HILIC
Detector Fluorescence (FLR)
Packaging 1/pkg
Product Type Standard
Shipping Formulation Solid
Storage Refrigerator 2 to 8 C
System LC/MS

info

186006693 - Ammonium Acetate 1M pH 5

Part Number: 186006693

For use with the pesticide screening application. Contains: 2, 10 mL ampules of Ammonium Acetate, 1M pH 5.0

186006693 - Ammonium Acetate 1M pH 5
Part Number: 186006693
Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Applications Environment
Detector Mass Spec
Product Type Reagent
Shipping Formulation Liquid
Storage Room temp
System LC/MS

info

430001243 - Tube Assy, Mixer- Ref. Valve

Part Number: 430001243

The tubing assembly that connects the mixer to the reference valve was originally part number 700002244. This part number has been changed to p/n 430001243.

430001243 - Tube Assy, Mixer- Ref. Valve
Part Number: 430001243
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Pumps
Products 1525 Micro HPLC Pump
Replacement Schedule As Needed

info

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE

Part Number: WAT026808

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE
Part Number: WAT026808
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 25 ft (7.6 m)
Material of Construction PTFE
Outside Diameter 0.125 in. (3.17 mm)

info

WAT037097 - High Flow Dropper Assembly

Part Number: WAT037097

This spare part is a Waters Quality part

WAT037097 - High Flow Dropper Assembly
Part Number: WAT037097
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Systems Components
Products Waters Fraction Collector III
Replacement Schedule As Needed

info

430002400 - Tube Assy, Mixer Manifold to I2V

Part Number: 430002400

ACQUITY H-Class QSM Mixer Manifold to I2V Tube assembly

430002400 - Tube Assy, Mixer Manifold to I2V
Part Number: 430002400
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
Products ACQUITY H-Class Quaternary Solvent Manager
Replacement Schedule As Needed

info

WAS081333 - Cuvette Holder Assembly

Part Number: WAS081333

The 2487/2489 detectors use a standard 10mm path length spectophotometric cell (quartz cuvette). The cuvette is inserted with the frosted sides facing up and down in the cuvette holder when placing it into the detector flow cell assembly. Fingerprints on the clear quartz sides interfere with the light path and compromise the integrity of the cuvette scanning operations. Since the cuvette scan is aquired by measuring the absorbances from a light path that includes both the flow cell and the cuvette, the solvent conditions in the flow cell should be identical for both the zero scan and the sample scan

WAS081333 - Cuvette Holder Assembly
Part Number: WAS081333
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Detectors
Products 2487 Dual Wavelength Absorbance Detector
2489 UV/Visible Detector

info

700002217 - 1000µL Plunger, (1/pkg)

Part Number: 700002217

This spare part is a Waters Quality part

700002217 - 1000µL Plunger, (1/pkg)
Part Number: 700002217
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2777 Compact Sample Manager
2777 Sample Manager
Replacement Schedule As Needed

info

M802004AD1-S - Insulator, AutoSpec Source Heater

Part Number: M802004AD1-S

This part is used to insulate the source heater from the ion block.

M802004AD1-S - Insulator, AutoSpec Source Heater
Part Number: M802004AD1-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Mass Spectrometry
Products AutoSpec Premier Mass Spectrometer
Replacement Schedule As Needed

info

M802217AD1-S - Shield, AutoSpec Outer Source

Part Number: M802217AD1-S

This is the shield protecting the outer source from the heater on the EI/CI outer source

M802217AD1-S - Shield, AutoSpec Outer Source
Part Number: M802217AD1-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products AutoSpec Premier Mass Spectrometer
Replacement Schedule As Needed

info

M945973AD1 - Thumb Nut

Part Number: M945973AD1

This spare part is a Waters Quality part

M945973AD1 - Thumb Nut
Part Number: M945973AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products Quattro micro GC Mass Spectrometer
Replacement Schedule As Needed

info

M945980AD1 - Thumb Nut, Focus Plate Assembly

Part Number: M945980AD1

This spare part is a Waters Quality part

M945980AD1 - Thumb Nut, Focus Plate Assembly
Part Number: M945980AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products Quattro micro GC Mass Spectrometer
Replacement Schedule As Needed

info

M960170BD1 - Spring Contact, Outer Source

Part Number: M960170BD1

This spare part is a Waters Quality part

M960170BD1 - Spring Contact, Outer Source
Part Number: M960170BD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products AutoSpec Premier Mass Spectrometer
GCT Mass Spectrometer
GCT Premier Mass Spectrometer
Quattro micro GC Mass Spectrometer
Replacement Schedule As Needed

info

M960171BD1 - Spring Contact, Outer Source

Part Number: M960171BD1

Spring Contact for Contact Support Plate Assembly in the Outer Source Assembly, St. Stl. (Quattro Micro GC, GCT/GCT Premier, Autospec NT/Premier)

M960171BD1 - Spring Contact, Outer Source
Part Number: M960171BD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products AutoSpec Premier Mass Spectrometer
GCT Mass Spectrometer
GCT Premier Mass Spectrometer
Replacement Schedule As Needed

info

M960387AD1-S - Ion Exit Plate (EI)

Part Number: M960387AD1-S

Ion Exit Plate for Inner Source Assembly (EI), St. Stl.

M960387AD1-S - Ion Exit Plate (EI)
Part Number: M960387AD1-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products GCT Mass Spectrometer
GCT Premier Mass Spectrometer
Replacement Schedule As Needed

info

M960542BD1-S - Z Half Plate

Part Number: M960542BD1-S

Z Half Plate for Outer Source Assembly, St. Stl.

M960542BD1-S - Z Half Plate
Part Number: M960542BD1-S
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products GCT Premier Mass Spectrometer
Replacement Schedule As Needed

info

M970666AD1 - Capillary Tube, Ref. Probe

Part Number: M970666AD1

Capillary Tube, Ref. Probe, St. Stl., length 130 mm

M970666AD1 - Capillary Tube, Ref. Probe
Part Number: M970666AD1
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products LCT Premier
LCT Premier XE
Replacement Schedule As Needed

info

PSL613607 - Solvent Inlet Filter 10µm 1/16in OD

Part Number: PSL613607

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

PSL613607 - Solvent Inlet Filter 10µm 1/16in OD
Part Number: PSL613607
Products > Chromatography Consumables & Columns > Accessories > Mobile Phase Filters

It is good practice to always filter your solvents to prevent system damage. Filters should be changed periodically depending on usage and mobile phase.

info

WAT005138 - Collet & Nut Assembly, 1/8in,, 10/Pkg

Part Number: WAT005138

This spare part is a Waters Quality part

WAT005138 - Collet & Nut Assembly, 1/8in,, 10/Pkg
Part Number: WAT005138
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Pumps
Products PrepLC 2000
PrepLC 4000
Replacement Schedule As Needed

info

WAT026810 - Tubing, 1/4 in. (6.4mm) O.D. X 0.19 in. (4.83 mm) I.D. X 10 ft (3.0 m) Length , PTFE

Part Number: WAT026810

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026810 - Tubing, 1/4 in. (6.4mm) O.D. X 0.19 in. (4.83 mm) I.D. X 10 ft (3.0 m) Length , PTFE
Part Number: WAT026810
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.19 in. (4.83 mm)
Length 10 ft (3.0 m)
Material of Construction PTFE
Outside Diameter 1/4 in. - (6.4 mm)

info

WAT052113 - Retainer, Seal

Part Number: WAT052113

This spare part is a Waters Quality part

WAT052113 - Retainer, Seal
Part Number: WAT052113
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Pumps
Products PrepLC 2000

info

186000846DV - Deactivated Amber Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 2 mL Volume, 100/pkg

Part Number: 186000846DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

186000846DV - Deactivated Amber Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE/silicone Septum , 2 mL Volume, 100/pkg
Part Number: 186000846DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Agilent
Beckman
Dynatech
Finnigan
Fisons
Gilson
Hitachi
LDC
Perkin-Elmer
Spectra-Physics
Varian
Waters 2695
Waters 2795
Certified Not Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Deactivated Amber Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 2 mL

info

430000785 - 2796, Sample Loop, 2mL, PEEK

Part Number: 430000785

This spare part is a Waters Quality part

430000785 - 2796, Sample Loop, 2mL, PEEK
Part Number: 430000785
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Sample Loop
Product Category Separations Module
Products 2796 Bioseparations Module
Replacement Schedule As Needed

info

430001209 - ASSY, TUBE, VENT VALVE P1 TO WASTE

Part Number: 430001209

This spare part is a Waters Quality part

430001209 - ASSY, TUBE, VENT VALVE P1 TO WASTE
Part Number: 430001209
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
nanoACQUITY
Products ACQUITY M-Class µASM
ACQUITY M-Class µBSM
ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed

info

430001210 - ASSY, TUBE, VENT VALVE P4 TO WASTE

Part Number: 430001210

This spare part is a Waters Quality part

430001210 - ASSY, TUBE, VENT VALVE P4 TO WASTE
Part Number: 430001210
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category ACQUITY
nanoACQUITY
Products ACQUITY M-Class µASM
ACQUITY M-Class µBSM
ACQUITY UPLC Binary Solvent Manager
nanoACQUITY UPLC Binary Solvent Manager/Auxiliary Solvent Manager
Replacement Schedule As Needed