Product Listing:  WAT023543 - Sep-Pak Florisil Plus Light Cartridge, 145 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk   to   WAT025829 - µPorasil Silica Prep Column, 125Å, 10 µm, 19 mm X 300 mm, 1/pkg

Sorted by Category
  Product    
info

WAT023543 - Sep-Pak Florisil Plus Light Cartridge, 145 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk

Part Number: WAT023543

Polar, highly active, weakly basic sorbent for adsorption of low to moderate polarity species from nonaqueous solutions.

WAT023543 - Sep-Pak Florisil Plus Light Cartridge, 145 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk
Part Number: WAT023543
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Florisil
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 145 mg
Units In Package 50/pkg
Water Wettable Water Wettable

info

WAT023549 - Sep-Pak Alumina A Plus Light Cartridge, 280 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk

Part Number: WAT023549

Sep-Pak Alumina A Plus Light cartridges contain a highly active grade of alumina with an acidic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This acidic alumina is also low-capacity ion exchanger in aqueous media. Unlike polymer-based ion exhangers, this sorbent is unaffected by high-energy radioactivity and can be used for radioactive compound isolation. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023549 - Sep-Pak Alumina A Plus Light Cartridge, 280 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk
Part Number: WAT023549
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Alumina A
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 280 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023555 - Sep-Pak Alumina B Plus Light Cartridge, 280 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk

Part Number: WAT023555

Sep-Pak Alumina B Plus Light cartridges contain a highly active grade of alumina with a basic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This basic alumina is also low-capacity ion exchanger in aqueous media. Sep-Pak Alumina B Vac cartridges can be used to extract phospholipids, steroids, and catecholamines. Since Sep-Pak Alumina B is unaffected by high-energy radioactivity, these cartridges can be used for radioactive compound isolation. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023555 - Sep-Pak Alumina B Plus Light Cartridge, 280 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk
Part Number: WAT023555
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Alumina B
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023575 - Sep-Pak Alumina A 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk

Part Number: WAT023575

Sep-Pak Alumina A Vac cartridges contain a highly active grade of alumina with an acidic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This acidic alumina is also low-capacity ion exchanger in aqueous media. Unlike polymer-based ion exhangers, this sorbent is unaffected by high-energy radioactivity and can be used for radioactive compound isolation. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023575 - Sep-Pak Alumina A 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk
Part Number: WAT023575
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Alumina A
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023580 - Sep-Pak Alumina B 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk

Part Number: WAT023580

Sep-Pak Alumina B Vac cartridges contain a highly active grade of alumina with a basic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This basic alumina is also low-capacity ion exchanger in aqueous media. Sep-Pak Alumina B Vac cartridges can be used to extract phospholipids, steroids, and catecholamines. Since Sep-Pak Alumina B is unaffected by high-energy radioactivity, these cartridges can be used for radioactive compound isolation. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023580 - Sep-Pak Alumina B 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk
Part Number: WAT023580
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Alumina B
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023585 - Sep-Pak Alumina N 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk

Part Number: WAT023585

Sep-Pak Alumina N Vac cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023585 - Sep-Pak Alumina N 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk
Part Number: WAT023585
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Alumina N
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023590 - Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk

Part Number: WAT023590

Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The Sep-Pak C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023590 - Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk
Part Number: WAT023590
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023595 - Sep-Pak Silica 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk

Part Number: WAT023595

Polar sorbent, used primarily to adsorb analytes from non polar solvents like hydrocarbons, chloro- or flouro-substituted hydrocarbons or less polar esters and ethers.

WAT023595 - Sep-Pak Silica 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk
Part Number: WAT023595
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Silica
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 1 - 8 pH

info

WAT023600 - Sep-Pak Florisil 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-200 µm Particle Size, 100/pk

Part Number: WAT023600

Polar, highly active, weakly basic sorbent for adsorption of low to moderate polarity species from nonaqueous solutions.

WAT023600 - Sep-Pak Florisil 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-200 µm Particle Size, 100/pk
Part Number: WAT023600
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Florisil
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable

info

WAT023605 - Sep-Pak Diol 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk

Part Number: WAT023605

Silica-based polar bonded phase with neutral character; can be used as an alternative to silica in normal-phase applications, where the acidic character of silica is undesirable or as very weakly interacting phase in aqueous applications; applications include antibiotics from cosmetics; isolation of proteins or peptides by hydrophobic interaction chromatography.

WAT023605 - Sep-Pak Diol 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk
Part Number: WAT023605
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Diol
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Reversed-phase
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023620 - Sep-Pak Accell Plus QMA 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk

Part Number: WAT023620

Sep-Pak Accell Plus QMA Vac cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of larger molecules such as anionic proteins such as immunoglobulins and enzymes. Other applications include isolation of phenolic compounds and removal of acidic pigments in wine, fruit juices, and food extracts. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023620 - Sep-Pak Accell Plus QMA 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk
Part Number: WAT023620
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Accell Plus QMA
Format/Type Vac Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023625 - Sep-Pak Accell Plus CM 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk

Part Number: WAT023625

Sep-Pak Accell Plus CM Vac cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023625 - Sep-Pak Accell Plus CM 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk
Part Number: WAT023625
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Accell Plus CM
Format/Type Vac Cartridge
Ion Exch. Capacity 370 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023635 - Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT023635

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT023635 - Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT023635
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry C18
Endcap End Capped
Format/Type Plus Long Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 820 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023650 - DeltaPak C18 Column, 300Å, 5 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: WAT023650

Delta-Pak packings, ideal for the separation of peptides, proteins, and natural products, are based on a highly stable, bonded, endcapped 5µm or 15µm spherical silica. Delta-Pak is available in two different pore sizes (100Å and 300Å) with either C4 or C18 bonded phase. Delta-Pak packings are available in different cartridge and column configurations, providing consistent and predictable scale-up capabilities for milligram-to-gram scale purification. Also, by having the same chemistry available on a high-efficiency 5µm particle, you can easily check the purity of your fractions.

WAT023650 - DeltaPak C18 Column, 300Å, 5 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: WAT023650
Brand: DeltaPak

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Peptide Separations > Delta-Pak Columns
% Carbon Load 17
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 300Å
Surface Area 125
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT023655 - Nova-Pak C18 Column, 60Å, 4 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: WAT023655

Nova-Pak C18 columns are general purpose, silica-based, reversed-phase C18 columns that are based on 4 µm particle technology. Compared to a 5 µm column, Nova-Pak columns offer higher resolution, more efficient separations, and faster chromatography.

WAT023655 - Nova-Pak C18 Column, 60Å, 4 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: WAT023655
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 7.3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 4 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity Medium
Surface Area 120
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT025050 - Amber Glass 15 x 45mm Snap Neck Vial, 4 mL Volume, 100/pkg

Part Number: WAT025050

Waters offers a selection of snap cap vials and snap caps/septa.

WAT025050 - Amber Glass 15 x 45mm Snap Neck Vial, 4 mL Volume, 100/pkg
Part Number: WAT025050
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 15 x 45mm
Format Vial
GlassType Amber Glass
Units in Package 100/pkg
Volume Capacity 4 mL

info

WAT025051 - Clear Glass 15 x 45mm Snap Neck Vial, 4 mL Volume, 100/pkg

Part Number: WAT025051

Waters offers a selection of snap cap vials and snap caps/septa.

WAT025051 - Clear Glass 15 x 45mm Snap Neck Vial, 4 mL Volume, 100/pkg
Part Number: WAT025051
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 15 x 45mm
Format Vial
GlassType Clear Glass
Units in Package 100/pkg
Volume Capacity 4 mL

info

WAT025053C - LCGC Certified Amber Glass 8 x 40 mm Snap Neck Vial, 1 mL Volume, 250/pkg

Part Number: WAT025053C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

WAT025053C - LCGC Certified Amber Glass 8 x 40 mm Snap Neck Vial, 1 mL Volume, 250/pkg
Part Number: WAT025053C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified LCGC Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Amber Glass
Units in Package 250/pkg
Volume Capacity 1 mL

info

WAT025053DV - Deactivated Amber Glass 8 x 40 mm Snap Neck Vial, with Cap and PTFE Septum, 1 mL Volume, 250/pkg

Part Number: WAT025053DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

WAT025053DV - Deactivated Amber Glass 8 x 40 mm Snap Neck Vial, with Cap and PTFE Septum, 1 mL Volume, 250/pkg
Part Number: WAT025053DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Deactivated Amber Glass
Septa Type Cap and PTFE Septum
Units in Package 250/pkg
Volume Capacity 1 mL

info

WAT025054C - LCGC Certified Clear Glass 8 x 40 mm Snap Neck Vial, 1 mL Volume, 250/pkg

Part Number: WAT025054C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

WAT025054C - LCGC Certified Clear Glass 8 x 40 mm Snap Neck Vial, 1 mL Volume, 250/pkg
Part Number: WAT025054C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified LCGC Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Clear Glass
Units in Package 250/pkg
Volume Capacity 1 mL

info

WAT025054DV - Deactivated Clear Glass 8 x 40 mm Snap Neck Vial, with Cap and PTFE Septum, 1 mL Volume, 250/pkg

Part Number: WAT025054DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

WAT025054DV - Deactivated Clear Glass 8 x 40 mm Snap Neck Vial, with Cap and PTFE Septum, 1 mL Volume, 250/pkg
Part Number: WAT025054DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Deactivated Clear Glass
Septa Type Cap and PTFE Septum
Units in Package 250/pkg
Volume Capacity 1 mL

info

WAT025313 - Compression Screw

Part Number: WAT025313

This is a standard stainless steel compression screw.

WAT025313 - Compression Screw
Part Number: WAT025313
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT025566 - Compression Fitting Plug, SS

Part Number: WAT025566

This part is a dead end fitting, male pinplug.

WAT025566 - Compression Fitting Plug, SS
Part Number: WAT025566
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT025604 - Compression Screws and Ferrules, 5/Pkg

Part Number: WAT025604

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which could damage valves and block columns.

WAT025604 - Compression Screws and Ferrules, 5/Pkg
Part Number: WAT025604
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT025820 - Nova-Pak C18 Prep Column, 60Å, 6 µm, 7.8 mm X 300 mm, 1/pkg

Part Number: WAT025820

Nova-Pak HR C18 columns are silica-based, semi-preparative and preparative columns that are based on 6 µm particle technology. Compared to a 5 µm column, Nova-Pak HR columns offer higher resolution, more efficient separations, and faster chromatography.

WAT025820 - Nova-Pak C18 Prep Column, 60Å, 6 µm, 7.8 mm X 300 mm, 1/pkg
Part Number: WAT025820
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 7.3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Prep Column
ID 7.8 mm
Length (mm) 300 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 6 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity Medium
Surface Area 120
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT025821 - Nova-Pak Silica Prep Column, 60Å, 6 µm, 7.8 mm X 300 mm, 1/pkg

Part Number: WAT025821

Nova-Pak HR C18 columns are silica-based, semi-preparative and preparative columns that are based on 6 µm particle technology. Compared to a 5 µm column, Nova-Pak HR columns offer higher resolution, more efficient separations, and faster chromatography.

WAT025821 - Nova-Pak Silica Prep Column, 60Å, 6 µm, 7.8 mm X 300 mm, 1/pkg
Part Number: WAT025821
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Silica
Endfitting Type Waters
Format Prep Column
ID 7.8 mm
Length (mm) 300 mm
Mode Normal-Phase
Particle Shape Spherical
Particle Size (dp) 6 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity High
Surface Area 120
System HPLC
USP Classification L3
Units in Package 1/pkg
pH Range 2 - 8

info

WAT025822 - Nova-Pak C18 Prep Column, 60Å, 6 µm, 19 mm X 300 mm, 1/pkg

Part Number: WAT025822

Nova-Pak HR C18 columns are silica-based, semi-preparative and preparative columns that are based on 6 µm particle technology. Compared to a 5 µm column, Nova-Pak HR columns offer higher resolution, more efficient separations, and faster chromatography.

WAT025822 - Nova-Pak C18 Prep Column, 60Å, 6 µm, 19 mm X 300 mm, 1/pkg
Part Number: WAT025822
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 7.3
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Prep Column
ID 19 mm
Length (mm) 300 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 6 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity Medium
Surface Area 120
System HPLC
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT025823 - Nova-Pak Silica Prep Column, 60Å, 6 µm, 19 mm X 300 mm, 1/pkg

Part Number: WAT025823

Nova-Pak HR Silica columns are silica-based, semi-preparative and preparative columns that are based on 6 µm particle technology. Compared to a 5 µm column, Nova-Pak HR columns offer higher resolution, more efficient separations, and faster chromatography.

WAT025823 - Nova-Pak Silica Prep Column, 60Å, 6 µm, 19 mm X 300 mm, 1/pkg
Part Number: WAT025823
Brand: Nova-Pak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Silica
Endfitting Type Waters
Format Prep Column
ID 19 mm
Length (mm) 300 mm
Mode Normal-Phase
Particle Shape Spherical
Particle Size (dp) 6 µm
Particle Substrate Silica
Pore Size 60Å
Silanol Activity High
Surface Area 120
System HPLC
USP Classification L3
Units in Package 1/pkg
pH Range 2 - 8

info

WAT025828 - µBondapak C18 Prep Column, 125Å, 10 µm, 19 mm X 300 mm, 1/pkg

Part Number: WAT025828

µBondapak C18 columns are general purpose, silica-based, reversed-phase C18 columns that are based on 10 µm particle technology. As a starting point for preparative chromatography, no other column can provide the balance between resolution, throughput and cost.

WAT025828 - µBondapak C18 Prep Column, 125Å, 10 µm, 19 mm X 300 mm, 1/pkg
Part Number: WAT025828
Brand: µBondapak

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
% Carbon Load 9.8
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Prep Column
ID 19 mm
Length (mm) 300 mm
Mode Reversed-Phase
Particle Shape Irregular
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 125Å
Surface Area 330
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8

info

WAT025829 - µPorasil Silica Prep Column, 125Å, 10 µm, 19 mm X 300 mm, 1/pkg

Part Number: WAT025829

Waters µPorasil 10µm silica packing material provides high-efficiency and low backpressure.

WAT025829 - µPorasil Silica Prep Column, 125Å, 10 µm, 19 mm X 300 mm, 1/pkg
Part Number: WAT025829
Brand: µPorasil

Products > Chromatography Consumables & Columns > Columns > HPLC Columns
Chemistry Silica
Endfitting Type Waters
Format Prep Column
ID 19 mm
Length (mm) 300 mm
Mode Normal-Phase
Particle Shape Irregular
Particle Size (dp) 10 µm
Particle Substrate Silica
Pore Size 125Å
Silanol Activity High
Surface Area 330
USP Classification L3
Units in Package 1/pkg
pH Range 2 - 8